In this paper, we present a picosecond pulsed, synchronously pumped optical parametric oscillator producing vortex beam output with tunable wavelengths in the near- to mid-infrared range. The system utilizes a Nd:YVO₄ picosecond pulsed solid-state laser emitting at a wavelength of 1.064 µm to pump a Z-shaped, singly resonant OPO which contains a MgO:PPLN crystal with a fan-shaped grating. The wavelength tuning characteristics of the OPO output are examined both as a function of the MgO:PPLN grating period and crystal temperature. The orbital angular momentum of the pump field can be selectively transferred to either the signal or idler fields by appropriately adjusting the location of the MgO:PPLN crystal within the OPO cavity. The maximum output power of the signal and idler vortex fields are 5.12 W and 3.46 W, respectively, for an incident pump power of 19 W.

Owing to their remarkable characteristics, two-dimensional (2D) layered, MAX phase materials have garnered significant attention in the field of optoelectronics in recent years. Herein, a novel MAX phase ceramic material (Mo₂TiAlC₂) was prepared into a saturable absorber (SA) by the spin-coating method for passively Q-switching (PQS), and its nonlinear optical absorption properties were characterized with a Tm:YAlO₃ (Tm:YAP) nanosecond laser. The structure characteristics and composition analysis revealed that the Mo₂TiAlC₂ material exhibits a well-defined and stable structure, with a uniform thin film successfully obtained through spin coating. In this study of a PQS laser by employing a Mo₂TiAlC₂-based SA, an average output power of 292 mW was achieved when the absorbed pump power was approximately 4.59 W, corresponding to a central output wavelength of 1931.2 nm. Meanwhile, a stable pulse with a duration down to 242.9 ns was observed at a repetition frequency of 47.07 kHz, which is the narrowest pulse width recorded among PQS solid-state lasers using MAX phase materials as SAs. Our findings indicate that the Mo₂TiAlC₂ MAX phase ceramic material is an excellent modulator and has promising potential for ultrafast nonlinear photonic applications.

Weak-value measurement (WVM) technique, especially the linear WVM technique, has been proved to be useful in high-precision metrology. However, the phase shift to be measured is strictly dominated by the input meter, such as the light wavelength and the space position. In this work, an inverse WVM technique using a monochromatic light source is presented to achieve precise estimation of the wavelength-independent phase shift. The theorical analysis in sensitivity and precision indicates that the inverse WVM technique is more applicable to wavelength-independent phase estimation. Two experimental designs based on this technique are proposed, which may promote its practical applications.

We present a high-power, widely tunable, synchronously pumped picosecond pulsed optical parametric oscillator (OPO) generating emissions in the near to mid-infrared wavelength ranges. The OPO is pumped using a Nd:YVO₄ picosecond pulsed laser and utilizes a fan-shaped, multi-grating MgO doped PPLN crystal (MgO:PPLN). The system generates near to mid-infrared output across the wavelength range 1.3–5 µm, with a high overall conversion efficiency of 75.15%.

Vortex beams are unique in that they have annular spatial profiles and carry orbital angular momentum. This has led to their use in applications including laser processing, microparticle manipulation and signal transmission. Off-axis vortex beams, which may be considered a subset of vortex beams, display a broader spectrum of physical characteristics in comparison with their conventional (integer-order) counterparts. In this work, we derive the equations which describe the intensity distribution of off-axis vortex beams and use these to theoretically model their spatial profile. These models are supported by experimental generation of both integer and off-axis vortex beams, and the presence of orbital angular momentum is investigated through the use of the cylindrical lens transformation method.

We propose a modified difference weak measurement scheme that permits precise measurements of the magneto-optical Faraday effect. By making normalized difference processing for a set of post-selected light intensity, a linear-response regime with a significant weak-value amplification effect is established. In the proof-of-principle experiment, we measure the magnetic intensity using the polarization system and achieve precision at the order of ∼10−7 T. Our scheme can be applied to measure other magneto-optical effects, providing a method for future ultra-sensitive sensing and metrology in magnetic physics.