Xiao feng Li

Dr. Xiao feng Li

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 July 2024 in IEEE Transactions on Consumer Electronics
Verified
Journal Article
Closed access
XLxiaofeng li
xiaofeng li
HCHantao Chen
Hantao Chen
FXFuqi Xie
Fuqi Xie
CCChenghao Cao
Chenghao Cao
SWSheng Wang
Sheng Wang
CSChanggeng Shuai
Changgeng Shuai
Clearance joints can reduce motion accuracy and shorten service life for high-voltage circuit breakers, and they are a significant source of mechanical faults. For clearance joint fault diagnosis, the anti-interference ability is important. However, robustness is rarely analyzed in current studies of fault diagnosis of high-voltage circuit breakers. Most conventional diagnosis models are based on individual classifiers with poor robustness, and their performance highly depends on expert prior information. In this paper, a novel Dempster ̶ Shafer multiple echo state network (DS-MESN) is proposed to enhance the model accuracy and robustness of fault diagnosis. First, energy distributions in intrinsic mode functions by variational mode decomposition are considered as the inputting vector for diagnostic model training and testing. Then, multiple echo state network modules with different network parameters are adopted as subclassifiers, and their diagnostic outputs are fused by DS evidence theory. The DS-MESN can compromise the performance of multiple echo state network modules, making its performance more stable and objective. The superiority of the reported methodology is demonstrated by experimental data from a real ZN12 high-voltage circuit breaker.

4 September 2025 in Energy
Verified
Journal Article
Open access
XLxiaofeng li
xiaofeng li
FXFuqi Xie
Fuqi Xie
XPXinglong Pan
Xinglong Pan
LYLiangwu Yu
Liangwu Yu
HFHan Fu
Han Fu
ZWZhifei Wu
Zhifei Wu

6 June 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
JCJun Chen
Jun Chen
GSGuanyu Shi
Guanyu Shi
JWJinzhe Wu
Jinzhe Wu
CCChenghao Cao
Chenghao Cao
LZLei Zhou
Lei Zhou
XLxiaofeng li
xiaofeng li
Diesel engine combustion is dependent mainly on the fuel injection characteristics, particularly the injection pressure and rate, which directly affect the engine efficiency and emissions. Herein, an electrically controlled supercharger is added to a traditional high-pressure common rail system to form an ultrahigh-pressure common rail system. Then, the variations in the spray, combustion, and emission characteristics of a diesel engine with a variable fuel injection rate are analyzed. Moreover, a simulation model for a diesel engine combustion chamber is built and verified by experimental results for numerical analysis. The results reveal that the injection rate can be flexibly adjusted via regulation when the solenoid valves are opened on the electrically controlled supercharger. Specifically, (1) the boot-shaped injection rate has greater potential than the traditional rectangular injection rate in terms of combustion and emission; (2) the main injection advance angle at the boot-shaped injection rate can be properly increased to improve combustion; and (3) the pilot injection quantity and advance angle are strongly coupled with the boot-shaped injection rate, potentially enhancing the mixing efficiency of fuel and air in the cylinder to achieve favorable emission results. This paper provides good guidance for the reliable design and optimization of noble-metal-based diesel engines.

1 January 2020 in Engineered Science
Verified
Journal Article
Open access
PDF file
Yan AnYan An
Yan An
SFShuai Feng
Shuai Feng
GSGuoqing Shao
Guoqing Shao
WYWanli Yuan
Wanli Yuan
Kai SunKai Sun
Kai Sun
RFRunhua Fan
Runhua Fan
In this work, the reduced iron powders were phosphated to form ferrous phosphate insulating layer on their surface. Then the iron based soft magnetic composites (SMCs) were prepared successfully by powder metallurgy and annealing process. The presence of insulating layer decreased the eddy current loss of iron powders. Furthermore, the effect of the annealing process on magnetic performance was investigated. The appropriate annealing temperature and holding time were carried out in this work. The samples were annealed in a N 2 atmosphere from 550 to 650 10 to 30 min. According to the results, the phosphated iron based SMCs that were annealed in a N 2 atmosphere at 600 15 min of holding time had the satisfying magnetic properties. It has a high resistivity () of 0.017 3 •cm, a high saturated magnetic flux density (B s) of 1.408 T, a high maximum permeability (m) of 263, a low coercivity (H c) of 197 A/ m and a low core loss (P s) of 119.70 W/kg at 1 000 Hz (B m =1 T).

6 May 2025 in Journal of Vibroengineering
Verified
Journal Article
Open access
PDF file
ZWZhijun Wang
Zhijun Wang
YSYunlei Song
Yunlei Song
WDWei Deng
Wei Deng
YLYapei Liu
Yapei Liu
HZHao Zhang
Hao Zhang
XLxiaofeng li
xiaofeng li
The dynamic characteristics of operating mechanisms are of great significance to the reliability of high-voltage circuit breakers (HVCBs). To achieve dynamic analysis and optimization design of HVCBs, this paper presents a reduced-order digital twin model for a 252 kV HVCB under the OpenModelica simulation platform. To validate the effectiveness of the model, simulated closing and opening stroke curves are compared with experimental results, demonstrating the high efficiency and accuracy of the reduced-order digital twin model. Furthermore, a simulation analysis is performed to examine the mechanical dynamics of the HVCB under potential fault conditions, such as abnormal spring driving force. The analysis reveals that a reduction in the preload of the closing spring slows the operating mechanism’s movement, increases closing time, and may even cause closing failure. Similarly, a decrease in the preload of the opening spring reduces the moving contact’s speed, prolongs the opening time, and may result in opening failure. The proposed digital twin modeling method offers designers a systematic method for quantifying the dynamic responses of HVCBs.

5 September 2025 in Materials
Verified
Journal Article
Open access
PDF file
HCHantao Chen
Hantao Chen
WGWenyong Guo
Wenyong Guo
XLxiaofeng li
xiaofeng li
XPXinglong Pan
Xinglong Pan
JZJian Xiang Zhang
Jian Xiang Zhang
ZYZeng Yan
Zeng Yan
The anisotropic mechanical properties of selective laser melting (SLM)-processed Ti-6Al-4V (TC4) alloy hinder its deployment in polar marine equipment. This study systematically probes the relationships between laser scanning strategies (unidirectional vs. 67°-rotated scanning between layers), notch orientation (governing loading direction), and cryogenic impact energy of SLM-TC4. Charpy impact tests from −60 °C to 20 °C were performed on V-notched specimens fabricated with distinct scanning strategies and notch orientations (top/side surfaces). The analysis of impact energy data and macro/micro-fractography demonstrates that impact energy declines markedly with decreasing temperature, showing a 25–35% reduction at −60 °C versus 20 °C while exhibiting enhanced data consistency under cryogenic conditions. Notably, specimens fabricated with 67°-rotated scanning between layers achieve higher impact toughness than unidirectionally scanned equivalents. Moreover, for identical scanning strategies, side-notched specimens consistently outperform top-notched specimens, evidencing superior interfacial bonding strength between deposited layers relative to bonding within individual layers. Within individual layers, toughness normal to the laser scan path exceeds that parallel to the path. However, controlling ductile-to-brittle transition behavior and precluding brittle failure are imperative for SLM-TC4 components in polar cryogenic service. This work delivers essential quantitative benchmarks and experimental validation for optimizing SLM processing in critical polar vessel components.