Johannes Antenor Senn

Dr. Johannes Antenor Senn

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2020 in Permafrost and Periglacial Processes
Verified
Journal Article
Open access
PDF file
JEJana Eichel
Jana Eichel
DDDaniel Draebing
Daniel Draebing
TKTeja Kattenborn
Teja Kattenborn
JSJohannes Antenor Senn
Johannes Antenor Senn
Lasse KlingbeilLasse Klingbeil
Lasse Klingbeil
EHErik Heinz
Erik Heinz
Solifluction is one of the most widespread periglacial processes with low annual movement rates in the range of —millimeters to centimeters. Traditional methods to assess solifluction movement usually have low spatial resolution, which hampers our understanding of spatial movement patterns and the factors controlling them. In this study, we (a) test the applicability of unmanned aerial vehicle (UAV)‐based structure‐from‐motion photogrammetry in comparison to a traditional total station survey to map surface movement of a turf‐banked solifluction lobe (TBL) in the Turtmann Valley (Switzerland). We then (b) relate the detected movement patterns to potential geomorphometric, material, thermal and vegetation controls, which we assessed using geomorphic and vegetation mapping, electrical resistivity surveys and temperature loggers. Our results show that (a) UAV‐based mapping can detect solifluction movement with high spatial resolution (one point per m2, total > 900 points) and rates and patterns consistent with a total station survey, but requires careful measurement set‐up and analysis; and (b) movement rates differ between lobe tread, riser and a ridge feature. Differences can be explained by heterogeneous material, geomorphometric, thermal and vegetation properties of the TBL, which promote different solifluction processes. Our study demonstrates the applicability of UAV‐based mapping in solifluction research and improves our understanding of solifluction processes and landform development.

22 January 2020 in Earth Surface Processes and Landforms
Verified
Journal Article
Open access
PDF file
JSJohannes Antenor Senn
Johannes Antenor Senn
FFFabian Fassnacht
Fabian Fassnacht
JEJana Eichel
Jana Eichel
SSSteffen Seitz
Steffen Seitz
SSSebastian Schmidtlein
Sebastian Schmidtlein
Soil loss caused by erosion has enormous economic and social impacts. Splash effects of rainfall are an important driver of erosion processes; however, effects of vegetation on splash erosion are still not fully understood. Splash erosion processes under vegetation are investigated by means of throughfall kinetic energy (TKE). Previous studies on TKE utilized a heterogeneous set of plant and canopy parameters to assess vegetation's influence on erosion by rain splash but remained on individual plant‐ or plot‐levels. In the present study we developed a method for the area‐wide estimation of the influence of vegetation on TKE using remote sensing methods. In a literature review we identified key vegetation variables influencing splash erosion and developed a conceptual model to describe the interaction of vegetation and raindrops. Our model considers both amplifying and protecting effect of vegetation layers according to their height above the ground and aggregates them into a new indicator: the Vegetation Splash Factor (VSF). It is based on the proportional contribution of drips per layer, which can be calculated via the vegetation cover profile from airborne LiDAR datasets. In a case study, we calculated the VSF using a LiDAR dataset for La Campana National Park in central Chile. The studied catchment comprises a heterogeneous mosaic of vegetation layer combinations and types and is hence well suited to test the approach. We calculated a VSF map showing the relation between vegetation structure and its expected influence on TKE. Mean VSF was 1.42, indicating amplifying overall effect of vegetation on TKE that was present in 81% of the area. Values below 1 indicating a protective effect were calculated for 19% of the area. For future work, we recommend refining the weighting factor by calibration to local conditions using field‐reference data and comparing the VSF with TKE field measurements. © 2020 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd

7 February 2022 in Earth Surface Processes and Landforms
Verified
Journal Article
Open access
PDF file
JSJohannes Antenor Senn
Johannes Antenor Senn
JMJon Mills
Jon Mills
Claire WalshClaire Walsh
Claire Walsh
SAStephen Addy
Stephen Addy
Maria V. PeppaMaria V. Peppa
Maria V. Peppa
The application of structure from motion (SfM) photogrammetry for digital elevation model (DEM) and orthophoto generation from visible imagery enjoys ever‐growing popularity in geomorphological research. Photogrammetry experts, however, urge that a rigorous approach is a prerequisite for reliable results—a requirement that may conflict with real‐world survey. We present a method that unites the two disciplines, using the example of a challenging SfM photogrammetric survey at a Scottish river. Using simultaneous geometric pre‐calibration of a multi‐sensor remotely piloted aircraft system (RPAS), the method facilitates time‐efficient topography mapping and the integration of other wavelengths to create orthophotos providing additional surface information. The approach utilizes an on‐site 3D structure—for example, a building, as calibration object, by extracting coordinates of natural features from lidar scans and sensor imagery. We assess the workflow with specialized calibration software (VMS) and widely applied commercial SfM photogrammetric software (AM), using a DJI Phantom optical and a Workswell thermal sensor. We achieved calibration accuracies below one‐third (optical) and one‐quarter (thermal) of a pixel. Subsequently, we transfer the sensor parameters to pre‐calibrate the SfM application and compare the results to a self‐calibrated workflow. In a systematic experiment using the optical river survey dataset, we assess the effectiveness of pre‐calibration, oblique imagery, scale variation and masking to mitigate systematic DEM errors. Opposing trends show between the calibration strategies. Decreasing network complexity (i.e., flying heights/view angles) improves pre‐calibrated but compromises self‐calibrated scenarios. Pre‐calibrating (VMS) imagery from a single height (30 m nadir) yielded the best results. This finding could have implications for geomorphological surveys, in which single‐scale datasets are widespread practice, despite the literature's urge towards more complex imaging networks. The self‐calibrated results legitimise this insistence: The same dataset resulted in pronounced dome‐shaped DEM distortion, indicating systematic errors, whereas additional flying heights and angles significantly improved the results.

30 December 2023 in Remote Sensing
Verified
Journal Article
Open access
PDF file
LOLaura Obrecht
Laura Obrecht
Frank-Michael GöttscheFrank-Michael Göttsche
Frank-Michael Göttsche
JSJohannes Antenor Senn
Johannes Antenor Senn
JCJan Cermak
Jan Cermak
Monitoring changes in vegetation cover over time is crucial for understanding the spatial distribution of rainfall, as well as the dynamics of plants and animals in the Namib desert. Traditional vegetation indices have limitations in capturing changes in vegetation cover within water-limited ecosystems like the Namib gravel plains. Spectral emissivity derived from thermal infrared remote sensing has recently emerged as a promising tool for distinguishing between bare ground and non-green vegetation in arid environments. This study investigates the potential of satellite-derived emissivities for mapping changes in fractional vegetation cover across the Namib gravel plains. Analyzing Moderate Resolution Imaging Spectroradiometer (MODIS) band 29 (λ = 8.55 µm) emissivity time series from 2001 to 2021, our findings demonstrate the ability of both Normalized Difference Vegetation Index (NDVI) and emissivity to detect sudden vegetation growth on the gravel plains. Emissivity additionally allows monitoring the extent of desiccated grass over several years after a rainfall event. Our results support a relationship between the change in fractional vegetation cover, the amount of rainfall and emissivity change magnitude. Information from NDVI and emissivity therefore provide complementary information for assessing vegetation in arid environments.

6 August 2020 in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
Verified
Journal Article
Open access
PDF file
JSJohannes Antenor Senn
Johannes Antenor Senn
JMJ. P. Mills
J. P. Mills
PMP. E. Miller
P. E. Miller
CWC. Walsh
C. Walsh
SAS. Addy
S. Addy
MPM. V. Peppa
M. V. Peppa
UAS imagery has become a widely used source of information in geomorphic research. When photogrammetric methods are applied to quantify geomorphic change, camera calibration is essential to ensure accuracy of the image measurements. Insufficient self-calibration based on survey data can induce systematic errors that can cause DEM deformations. The typically low geometric stability of consumer grade sensors necessitates in-situ calibration, as the reliability of a lab based calibration can be affected by transport. In this research a robust on-site workflow is proposed that allows the time-efficient and repeatable calibration of thermal and optical sensors at the same time. A stone building was utilised as calibration object with TLS scans for reference. The approach was applied to calculate eight separate camera calibrations using two sensors (DJI Phantom 4 Pro and Workswell WIRIS pro), two software solutions (Vision Measurement System (VMS) and Agisoft Metashape) and two different subsets of images per sensor. The presented results demonstrate that the approach is suitable to determine camera parameters for pre-calibrating photogrammetric surveys.

3 September 2025 in Earth Surface Processes and Landforms
Verified
Journal Article
Open access
JSJohannes Antenor Senn
Johannes Antenor Senn
JSJannika Schäfer
Jannika Schäfer
ZHZahra Hosseini
Zahra Hosseini
SSSteffen Seitz
Steffen Seitz
Rainfall erosivity, expressed in kinetic energy, is determined by intensity, velocity and drop size distribution. In natural precipitation, these properties vary and can be substantially altered by the vegetation before reaching the ground. The splash effect of impacting raindrops on the soil surface can initiate soil erosion. While research in this regard has focussed on relating plant characteristics to erosion processes, there is a lack of studies that attempt to reverse this by predicting throughfall kinetic energy from plant properties. This has been attempted by the Vegetation Splash Factor (VSF), a model solely based on the three‐dimensional distribution of vegetation surfaces derived from forest lidar forest data. We conducted a pilot study using the VSF model to validate it with in situ measurements and confirm its general suitability. We found a significant correlation between the observed and predicted effect of vegetation on the kinetic energy of rainfall, which demonstrates the suitability of the VSF, despite being solely based on structural traits. The observed effect of vegetation on rainfall kinetic energy exceeded literature reports, leading to systematic underestimation by the model. Our results showed that the VSF can be used to spatially continuously predict the effect of vegetation on the erosivity of rainfall from high‐resolution lidar data. These findings open new possibilities for research on splash erosion under vegetation, shifting the perspective from point‐based studies towards area‐wide approaches. The simplicity of the approach facilitates adaptation for wider use. The first application of the VSF in a field study has proved that the concept is functional and can illustrate zones of increased potential for soil loss under full vegetation cover. This adds to the methodological tool box for erosion studies and can support decision‐makers in forestry and agriculture in the future.