Xiaoyuan Sun

Mr. Xiaoyuan Sun


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 December 2022 in Aerospace
Verified
Journal Article
Open access
PDF file
Feng DengFeng Deng
Feng Deng
XSXiaoyuan Sun
Xiaoyuan Sun
FCFenghua Chi
Fenghua Chi
RJRuixue Ji
Ruixue Ji
In recent years, more attention has been paid to vehicles that can travel between air and water, known as trans-media vehicles. They are often designed as cylindrical bodies in order to reduce the impact load during water entry. In this paper, the water-entry processes of small-sized cylindrical trans-media vehicles, with a characteristic length of 1 m, were investigated numerically by solving the unsteady Reynolds-averaged Navier–Stokes equations using the volume-of-fluid method, the dynamic grid method and the six degrees of freedom solver. The numerical methods were first validated by comparing the numerical results with the existing experimental data. Then, the effects of the body mass, the diameter-to-length ratio, the water-entry angle and the head shape on the water-entry process were investigated. The results show that the peak impact load, measured by the peak force exerted by water on the body, can be significantly reduced by decreasing the body mass, decreasing the diameter, entering the water at an optimum water-entry angle or installing an ellipsoidal head. In particular, the peak impact load was found to be approximately proportional to the square of the body mass or the cube of the cylinder diameter. Furthermore, installing an ellipsoidal head can reduce about 94% of the peak impact load experienced by a cylindrical body.

8 December 2023 in Processes
Verified
Journal Article
Open access
PDF file
ALAnjun Liu
Anjun Liu
XSXiaoyuan Sun
Xiaoyuan Sun
Dehua LiuDehua Liu
Dehua Liu
The three-dimensional flow and mass transfer conditions in 5 L and 40 L airlift oscillation loop reactors were studied and compared with existing two-dimensional simulation and experimental data to verify the accuracy of the method. Then, the fluid dynamics behavior of the 2500 L reactor was simulated via supercomputing and provided guidance for production data. The results indicate that the application of oscillation operation in the 40 L multi-guide tube reactor can effectively improve the gas holdup and mass transfer coefficient in the reactor, with a maximum increase of 38% and 29%. For the 2500 L multi guide tube reactor, oscillation operation oscillation operation can significantly improve gas holdup and mass transfer coefficient increase gas holdup by 46% under 0.5 vvm operating conditions; the mass transfer coefficient increased by 54%. Therefore, oscillation operation can greatly improve the mass transfer coefficient for actual production reactors. After digging a hole in the middle sleeve, the circulating liquid speed has no effect. Although the gas holdup and mass transfer coefficient decreased by 1.3%, the gas holdup inside the entire reactor was more uniform, effectively reducing the average bubble aggregation.