Batch and column operations were performed utilizing thioglycolated sugarcane carbon (TSCC), a low-cost adsorbent, to remove As(III) and As(V) from aqueous systems. Under optimized batch conditions, the TSCC could remove up to 92.7 and 91.4 % for As(III) and As(V), respectively. An artificial neural network model showed the validity of TSCC as a preferable adsorbent for arsenic [As(III) and As(V)] removal in batch studies. In column operations, removal efficiency increases with increase in influent arsenic concentration and adsorbent dose and decreases with increase in flow rate. At an adsorbent dose of 6.0 g, flow rate 3.0 mL min−1, and initial arsenic concentration 1,500 μg L−1, the arsenic uptake capacity of TSCC for As(III) and As(V) was found to be 85.01 and 83.82 μg g−1, respectively. The Thomas model was used to analyze the column experimental data. Results from the column operations indicated that the adsorption behavior of arsenic [As(III) and As(V)] fits exceptionally well with the Thomas model with high correlation coefficient and very low standard error. Examinations of scanning electron microscopy and FTIR spectroscopy reveal that high arsenic adsorption favors surface complexation on the adsorbent surface.
The spatiotemporal distribution of soil moisture is a key variable for hydrological and meteorological applications that influences the exchange of water and energy fluxes at the land surface/atmosphere interface. Accurate estimate of the spatiotemporal variations of soil moisture is critical for numerous large-scale environmental studies. Recent technological advances in satellite remote sensing have shown that soil moisture can be measured by a variety of remote sensing techniques, each with its own strengths and weaknesses which minimizes the ill-posed conventional problems. Technical and methodological advances such as multi-configuration radar and forthcoming SAR constellations are increasingly mitigating the shortcomings of SAR with respect to soil moisture estimation at the field and catchment scale. This paper presents a comprehensive review of few selected inversion methods of soil moisture, with focus on technique in passive microwave and active microwave measurements, in addition to the factors which affect the microwave return. The theoretical and physical principles and the status of current basic retrieval methods are summarized. Limitations existing in current soil moisture estimation algorithms and the major influencing factors including radar configurations (polarization, incidence angel and frequency of bands) and soil surface characteristics on backscattering coefficient have been addressed and also discussed.
1 March 2014 in Journal of Environmental Chemical Engineering