The current environmental and potable water crisis requires technological advancement to tackle the issues caused by different organic pollutants. Herein, we report the degradation of organic pollutants such as Congo Red and acetophenone from aqueous media using visible light irradiation. To harvest the solar energy for photocatalysis, we fabricated a nanohybrid system composed of bismuth ferrite nanoparticles with two-dimensional (2D) MXene sheets, namely, the BiFeO₃ (BFO)/Ti₃C₂ (MXene) nanohybrid, for enhanced photocatalytic activity. The hybrid BFO/MXene is fabricated using a simple and low-cost double-solvent solvothermal method. The SEM and TEM images showed that the BFO nanoparticles are attached onto the surface of 2D MXene sheets. The photocatalytic degradation achieved by the hybrid is found to be 100% in 42 min for the organic dye (Congo Red) and 100% for the colorless aqueous pollutant (acetophenone) in 150 min. The BFO/MXene hybrid system exhibited a large surface area of 147 m² g^–1 measured via the Brunauer–Emmett–Teller sorption–desorption technique, which is found to be the largest among all BFO nanoparticles and derivatives. The photoluminescence spectra indicate a low electron–hole recombination rate. Fast and efficient degradation of organic molecules is caused by two factors: larger surface area and lower electron–hole recombination rate, which makes the BFO/MXene nanohybrid a highly efficient photocatalyst and a promising candidate for many future applications.

Nowadays, photocatalysis has gained tremendous interest owing to the fact that it can overcome water crisis as well as the environmental issues by utilizing a major source of solar energy. The nanohybrid structures of Gd³⁺- and Sn⁴⁺-doped bismuth ferrite (Bi_1–xGd_xFe_1–ySn_y; BGFSO) with two-dimensional (2D) MXene sheets are synthesized by the coprecipitation method. The 2D sheets have a large surface area, incorporation of which into Bi_1–xGd_xFe_1–ySn_y (BGFSO) nanoparticles provides a path for electrons to flow, which results in large recombination time and thus enhances dye degradation. The Bi_0.90Gd_0.10Fe_0.80Sn_0.20O₃/MXene (BGFO-20Sn/MXene) nanohybrid shows 100% degradation of Congo dye from the catalytic solution in 120 min, which is highly efficient for industrial application.

Over the years, scarcity of fresh potable water has increased the demand for clean water. Meanwhile, with the advent of nanotechnology, the use of nanomaterials for photocatalytic degradation of pollutants in wastewaters has increased. Herein, a new type of nanohybrids of La- and Mn-codoped bismuth ferrite (BFO) nanoparticles embedded into transition-metal carbide sheets (MXene–Ti₃C₂) were prepared by a low-cost double-solvent sol–gel method and investigated for their catalytic activity in dark and photoinduced conditions. The photoluminescence results showed that pure BFO has the highest electron hole recombination rate as compared to all the codoped BFO/Ti₃C₂ nanohybrids. The higher electron–hole pair generation rate of the nanohybrids provides a suitable environment for fast degradation of organic dye molecules. The band gap of the prepared nanohybrid was tuned to 1.73 eV. Moreover, the BLFO/Ti₃C₂ and BLFMO-5/Ti₃C₂ degraded 92 and 93% of the organic pollutant, respectively, from water in dark and remaining in the light spectrum. Therefore, these synthesized nanohybrids could be a promising candidate for catalytic and photocatalytic applications in future.

The continuously growing need for clean water has increased research looking for new and efficient ways to treat wastewater. Due to its magnetic properties, Bismuth ferrite, a photo-catalyst, has introduced a novel field of photo-catalysis where the photo-catalytic material could easily be separated from the aqueous solution after wastewater treatment. Herein, a new type of photo-catalysts, composed of Gadolinium (Gd) and Tin (Sn), co-doped Bismuth Ferrite deposited over graphene nanoplatelet surface have been synthesized using a two-step method. In first step, Gd (fixed concentration 10%) and Sn (5%, 15%, 20% and 25%) were doped inside bismuth ferrite (BFO) host using sol-gel method (namely the BGFSO nanoparticles, abbreviated for Gd and Sn doped BFO). In the second step, BGFSO nanoparticles were introduced onto GNPs using co-precipitation method (namely the BGFSO/GNP nanohybrids). The x-ray photoelectron spectroscopy confirmed the chemical bonding between co-doped BFO and GNP sheets via oxy and hydroxyl groups. The photocatalytic activities of the nanohybrids under both, visible light and dark conditions have been increased, and the maximum degradation activity (74%) of organic dye Congo-red (CR) is obtained for 25% Sn-doped BGFSO/GNP nanohybrid. The photocatalytic activity may be attributed to enhanced adsorption capability, electron storage properties of graphene and the presence of oxygen-rich species inside nanohybrids. Based on the current overgrowing population and need for clean water, these materials present versatile potential as catalysts for wastewater treatment.