Jonas Simon

Mr. Jonas Simon


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 March 2023 in Structural Health Monitoring
Verified
Journal Article
Open access
JSJonas Simon
Jonas Simon
TKThomas Kurin
Thomas Kurin
Jochen MollJochen Moll
Jochen Moll
OBOliver Bagemiel
Oliver Bagemiel
RWRaphael Wedel
Raphael Wedel
VKViktor Krozer
Viktor Krozer
This paper presents the design and experimental realization of a cooperative radar network for structural health monitoring (SHM) of wind turbine blades. For this purpose, 40 FMCW (frequency-modulated continuous wave) radar sensors operating from 58 to 63.5 GHz have been installed in a 31-m-long blade during manufacturing. A subset of 10 sensors is material-embedded in the core material of the blade, and the remaining thirty sensors are placed inside the blade on an inner rotor blade surface. The sensors are distributed over the entire blade based on previous high-frequency electromagnetic simulations. A full-scale fatigue test has been performed under controlled laboratory conditions. In addition, holes have been drilled into the blade by hand to represent a well-defined and relatively small damage. During the experimental campaign, measurements from the complete radar network have been transferred to a base station through a wireless communication link. Finally, it was demonstrated that fatigue as well as artificial damage could be detected accurately using the proposed damage indicator (DI) approach.

25 January 2024 in Sensors
Verified
Journal Article
Open access
PDF file
JSJonas Simon
Jonas Simon
Jochen MollJochen Moll
Jochen Moll
Viktor KrozerViktor Krozer
Viktor Krozer
The compensation of temperature is critical in every structural health monitoring (SHM) system for achieving maximum damage detection performance. This paper analyses a novel approach based on seasonal trend decomposition to eliminate the temperature effect in a radar-based SHM system for wind turbine blades that operates in the frequency band from 58 to 63.5 GHz. While the original seasonal trend decomposition searches for the trend of a periodic signal in its entirety, the new method uses a moving average to determine trends for each point of a periodic signal. The points of the seasonal signal no longer need to have the same trend. Based on the determined trends, the measurement signal can be corrected by temperature effects, providing accurate damage detection results under changing temperature conditions. The performance of the trend decomposition is demonstrated with experimental data obtained during a full-scale fatigue test of a 31 m long wind turbine blade subjected to ambient temperature variations. For comparison, the well-known optimal baseline selection (OBS) approach is used, which is based on multiple baseline measurements at different temperature conditions. The use of metrics, such as the contrast in damage indicators, enables the performance assessment of both methods.

26 May 2025 in Sensors
Verified
Journal Article
Open access
PDF file
ESErik Streser
Erik Streser
SASercan Alipek
Sercan Alipek
MRManuel Enrico Enrico Rao
Manuel Enrico Enrico Rao
JSJonas Simon
Jonas Simon
Jochen MollJochen Moll
Jochen Moll
Viktor KrozerViktor Krozer
Viktor Krozer
This paper reports a convolutional neural network (CNN)-based damage detection approach for radar-based structural health monitoring of wind turbine blades. Subsequent radar measurements are transformed into an image-type representation for use as CNN input. In contrast to conventional approaches that require compensation for temperature and loading effects, the proposed framework inherently learns all required information during the training phase. Its damage detection performance (i.e., detecting intact vs. damaged condition) is demonstrated using measurements from multiple embedded radar sensors during fatigue testing of a wind turbine blade with a length of 31 m. The achieved F1-score for correct damage classification is between 91% and 100% for both the unloaded and the loaded blade.

28 March 2025 in Structural Health Monitoring
Verified
Journal Article
Open access
MRManuel Enrico Enrico Rao
Manuel Enrico Enrico Rao
JSJonas Simon
Jonas Simon
Jochen MollJochen Moll
Jochen Moll
MSMark-Felix Schütz
Mark-Felix Schütz
Delivery drones have become increasingly important in recent years. It is advantageous for commercialization that suppliers are able to deliver orders autonomously and directly to their customers via air transport. However, the safety aspect must be considered. Real-time inspection of delivery drones during operation helps preventing accidents and a threat to civilians. For continuous monitoring, the sensors must be installed on the drone throughout the flight. A promising approach uses the inherent excitation of the servomotors for vibration-based Structural Health Monitoring (SHM). Vibrations can be recorded using triaxial acceleration sensors and analyzed using suitable methods such as stochastic subspace-based fault detection or histogram difference. In comparison to nondestructive testing, reference measurements of the intact structure are necessary in SHM. As soon as laboratory conditions no longer exist and environmental parameters, for example, wind, influence the vibration spectrum, classification methods are necessary for compensation. The recording of comprehensive reference datasets with different environmental conditions is limited by the battery life. This work focuses on diagnosing irreversible rotor blade damages of an 8.5 kg delivery drone. A parametric analysis taking into account systematic fusion of damage indicators and a specific number of considered references were determined for this purpose in order to assess the severity of the existing damage. Onboard SHM to evaluate the airworthiness in real time for linear and hovering flights was achieved.

1 January 2020 in Progress In Electromagnetics Research Letters
Verified
Journal Article
Open access
PDF file
JSJonas Simon
Jonas Simon
Jochen MollJochen Moll
Jochen Moll
Viktor KrozerViktor Krozer
Viktor Krozer
TKThomas Kurin
Thomas Kurin
FLFabian Lurz
Fabian Lurz
VIVadim Issakov
Vadim Issakov
This paper presents a numerical study on the application of radar and communication (RadCom) sensor nodes operating in the frequency band from 57-64 GHz. The sensor nodes are embedded in the laminate of wind turbine blades, enable a quality inspection directly after rotor blade manufacturing as well as a structural health monitoring (SHM) throughout the service life of the blade. Given by a lack of dielectric properties for typical rotor blade materials, we have performed experimental studies on material characterization including glass fibre composites, balsa wood, infusion glue, etc. This material database serves as input for wave propagation simulations in a full scale 3D rotor blade model. The analysis also includes a parametric study on path losses as well as an optimal sensor placement strategy.

9 June 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
MMMoritz Mälzer
Moritz Mälzer
JSJonas Simon
Jonas Simon
CGCarsten Günner
Carsten Günner
Daniel Del-Río-VelillaDaniel Del-Río-Velilla
Daniel Del-Río-Velilla
MRManuel Enrico Enrico Rao
Manuel Enrico Enrico Rao
Viktor KrozerViktor Krozer
Viktor Krozer
This paper introduces a novel structural health monitoring (SHM) approach based on guided electromagnetic waves propagating in a dielectric waveguide in the frequency range from 23.5 to 26 GHz. This approach enables the detection of structural damage based on the analysis of radar signals. This paper presents the performance of the methodology through an experimental case study considering an autonomous heavy lift drone where the whole SHM system is integrated onboard. The whole data acquisition pipeline is described, and damage detection results based on a damage indicator approach are presented and discussed. Finally, this work proves the ability of guided electromagnetic wave technology to be used in flying aerial vehicles. The methodology can be applied to other aircraft structures and application cases in the future.