The paper describes the influence of power electronics, energy processing, and emergency radio systems (ERS) immunity testing on onboard aircraft equipment and ground stations providing air traffic services. The implementation of next-generation power electronics introduces potential hazards for the safety and reliability of aircraft systems, especially the interferences from power electronics with high-power processing. The paper focuses on clearly identifying, experimentally verifying, and quantifiably measuring the effects of power electronics processing using switching modes versus the electromagnetic compatibility (EMC) of emergency radio systems with electromagnetic interference (EMI). EMI can be very critical when switching power radios utilize backup receivers, which are used as aircraft backup systems or airport last-resort systems. The switching power electronics process produces interfering electromagnetic energy to create problems with onboard aircraft radios or instrument landing system (ILS) avionics services. Analyses demonstrate significant threats and risks resulting from interferences between radio and power electronics in airborne systems. Results demonstrate the impact of interferences on intermediate-frequency processing, namely, for very high frequency (VHF) radios. The paper also describes the methodology of testing radio immunity against both weak and strong signals in accordance with recent aviation standards and guidance for military radio communication systems in the VHF band.

This paper deals with the analyses of batteries used in current military systems to power the electric drives of military vehicles. The article focuses on battery analyses based on operational data obtained from measurements rather than analyses of the chemical composition of the tested batteries. The authors of the article used their experience from the development test-laboratory of military technology. This article presents a comparative analysis of existing and promising technologies in the field of energy storage and buffering for military electric vehicles. The overview of these technologies, including the design, operating principles, advantages, and disadvantages, are briefly presented to produce theoretical comparative analyses. However, this article mainly focuses on the experimental verification of operational ability in varied conditions, as well as the comparison and analysis of these results. The main part of the article provides more experimental studies on technologies of energy storage and buffering using the results of several experiments conducted to demonstrate the behavior of each technology in different working conditions. The output parameters, as well as the state of charge of each technology’s samples, were surveyed in various temperatures and loading characteristics. The results presented in this paper are expected to be useful for optimizing the selection of energy storage and buffering solutions for military electric vehicles in different applications and functional environments.

This paper deals with a design and implementation of optical defensive device for protection of aviation personnel. The design is built on the basic characteristics of human eyesight, illumination sensing of the environment, and microcontroller implementation for adaptation over sensed power, flash duration, and person distance. The aviation safe LED-based optical dazzler equipment (ASLODE) utilizes light emitting diode (LED) technology implemented with constant current regulators to control several modes of effects based on situational sensing. The temporarily incapacitating device can be extended by means of real-time illumination sensing to improve power efficiency and reach the highest level of safety. The smart pulse sets the flashing frequency from 8Hz for high-level light intensities and up to 20 Hz in low-level lighting conditions. Experimental results demonstrate the effectiveness of the ASLODE device over numerous experiments with controlled onboard aircraft scenarios that adapt the energy, flash rate, and processing to the sensed environmental illumination to meet aviation hygienic standards for people without eyesight defects.