In this paper, we considered the real-time modeling of an underwater channel impulse response (CIR), exploiting the inherent structure and sparsity of such channels. Building on the recent development in the modeling of acoustic channels using a Kronecker structure, we approximated the CIR using a structured and sparse model, allowing for a computationally efficient sparse block-updating algorithm, which can track the time-varying CIR even in low signal-to-noise ratio (SNR) scenarios. The algorithm employs a conjugate gradient formulation, which enables a gradual refinement if the SNR is sufficiently high to allow for this. This was performed by gradually relaxing the assumed Kronecker structure, as well as the sparsity assumptions, if possible. The estimated CIR was further used to form a residual signal containing (primarily) information of the time-varying signal responses, thereby allowing for the detection of weak target signals. The proposed method was evaluated using both simulated and measured underwater signals, clearly illustrating the better performance of the proposed method.
13 September 2024 in IEEE Transactions on Instrumentation and Measurement
This paper addresses the problem of multi-target localization from acoustic time delay measurements in a 3-D underwater environment, taking into account the depth dependent sound speed of the underwater wave propagation. Specifically, we formulate the problem as an optimal mass transport optimization over a grid of potential candidate positions. By exploiting an iterative refinement approach allowing for off-grid effects, the method allows for robust and accurate positioning of unlabeled underwater target echoes. Using numerical experiments, we illustrate the preferable performance of the presented method as compared to current approaches.
11 December 2025 in IEEE Transactions on Instrumentation and Measurement
The detection of underwater targets is severely affected by the non-uniform spatial characteristics of marine environmental noise. Additionally, the presence of both natural and anthropogenic acoustic sources, including shipping traffic, marine life, and geological activity, further complicates the underwater acoustic landscape. Addressing these challenges requires advanced underwater sensors and robust signal processing techniques. In this paper, we present a novel approach that leverages an optical fiber distributed acoustic sensing (DAS) system combined with a broadband generalized sparse covariance-fitting framework for underwater target direction sensing, particularly focusing on robustness against non-uniform noise. The DAS system incorporates a newly developed spiral-sensitized optical cable, which significantly improves sensitivity compared to conventional submarine cables. This innovative design enables the system to capture acoustic signals with greater precision. Notably, the sensitivity of the spiral-wound sensitized cable is around - 145.69 dB re:1rad/(μPa · m), as measured inside the standing-wave tube. Employing simulations, we assess the performance of the algorithm across diverse noise levels and target configurations, consistently revealing higher accuracy and reduced background noise compared to conventional beamforming techniques and other sparse techniques. In a controlled pool experiment, the correlation coefficient between waveforms acquired by the DAS system and a standard hydrophone reached 0.973, indicating high fidelity in signal capture. Moreover, during a lake field experiment, the DAS system equipped with a sensitized optical cable was deployed on the lakebed to consistently track a non-cooperative speedboat. These results confirm the effectiveness of the proposed approach in practical scenarios involving complex, non-uniform noise environments.
Sensitivity of soil erosion is the representative of the possibility of occurring soil erosion under natural conditions. Sensitivity evaluation of soil erosion is the reliable method to identify the highly sensitivity areas and evaluate the sensitivity degree in a particular area. This paper uses the revised universal soil loss equation (RUSLE) and GIS technique which has powerful space analysis functions for extracting the factors of soil erosion, making thematic maps and building the model to research the sensitivity of soil erosion in Jixi County. According to the characteristics of geography in study area, the key sensitivity factors of the soil erosion were defined, which include rainfall erosivity factor, soil erodibility factor, slope factor and vegetation cover factor. The aim of the article is to explore the space distribution characteristics of soil erosion in Jixi County.