The fracture network generated by hydraulic fracturing in unconventional shale reservoirs contains numerous microfractures that are connected to macroscopic fractures. These microfractures serve as crucial pathways for shale gas to flow out from micro- and nano-scale pores, playing a critical role in enhancing shale gas recovery. Currently, more attention is being given by academia and industry to the evolution of macroscopic fracture networks, while the understanding of the microfracture mechanisms and evolution is relatively limited. A significant number of microfractures are generated during the hydraulic fracturing process of shale. These microfractures subsequently propagate, merge, and interconnect to form macroscopic fractures. Therefore, studying the fracture process of rock masses from a microscale perspective holds important theoretical significance and engineering value. Based on the authors’ research experience and literature review, this paper provides a brief overview of current progress in shale microfracture research from five aspects: in situ observation experiments of microfractures in shale, formation and evolution processes of discontinuous microfractures, the impact of inhomogeneity on microfracture propagation, measurement methods for microscale mechanical parameters and deformation quantities in shale, and numerical simulation of shale microfractures. This paper also summarizes the main challenges and future research prospects in shale microfracture studies, including: (1) quantitative characterization of in situ observation experimental data on shale microfractures; (2) formation and evolution laws of macroscopic, mesoscopic, and microscopic multi-scale discontinuous fractures; (3) more in-depth and microscale characterization of shale heterogeneity and its deformation and fracture mechanisms; (4) acquisition of shale micro-mechanical parameters; (5) refinement and accuracy improvement of the numerical simulation of microfractures in shale. Addressing these research questions will not only contribute to the further development of microfracture theory in rocks but also provide insights for hydraulic fracturing in shale gas extraction.

Chattering in composite deep-hole boring can directly affect surface processing quality and efficiency and has always been a research hotspot in machining mechanics. In this study, based on Euler–Bernoulli beam theory, the fine control equations for the cutting stability of composite variable-section boring bars were established using the Hamilton principle, in which the sectional change and internal damping of the material were considered. Next, using the Galerkin method and semi-discrete method, the effects of the taper ratio, damping ratio, length-to-diameter ratio, and ply angle on the free vibration characteristics and cutting stability were analyzed in detail. The results show that at a low damping ratio, both the first-order inherent frequency and boring stability can be enhanced with the increase in the taper ratio; at a large damping ratio, increasing the taper ratio can reduce the first-order inherent frequency and boring stability. Finally, the effects of the sectional change on the inherent frequency, displacement response, and convergence were analyzed. A numerical simulation was performed for the model reliability validation. The present research results can provide a theoretical basis and technical guidance for analyzing the cutting stability and fine control of composite variable-section boring bars with large length-to-diameter ratios.

To understand the macroscopic fracture behavior of shale under different confining pressures, it is necessary to study the process of microcrack propagation from a microscopic perspective. In this study, a cohesive zone model for heterogeneous shale based on mineral distribution was constructed. Numerical simulation experiments were conducted under different confining pressures to investigate the effects of confining pressure on the extension of microcracks under tensile and shear loading from three perspectives: microcrack morphology, acoustic emission characteristics, and mechanical responses of different minerals. This study reveals the influence of different confining pressures on the extension of microcracks under tensile and shear loading conditions in shale and their microscopic mechanisms, which holds theoretical and practical significance for the exploitation of deeply buried shale gas.

According to the tail grouting of a double shield TBM tunnel in a soft stratum, the spherical hole model with small and large diffusion radius were established respectively considering the slurry diffusion and slurry displacement effect in the grouting compaction stage. An- alytical solutions...