Sandwich panel structures are composed of three layers: core and two facings. The configuration of the core deeply influences the mechanical properties of the sandwich panel. Numerous innovative core shapes have been proposed to enhance these properties; however, many have not been implemented due to manufacturing difficulties, particularly spherical shapes. This research aims to address this manufacturing challenge by utilizing 3D printing technology to produce sandwich panels with a spherical core. Additionally, the study investigates the effects of varying design parameters like sphere diameter, offset distance and face thickness on the free vibration features of the sandwich panels experimentally and numerically. Experimental tests validated the finite element models with an error margin below 12%. The key parameters explored were spherical diameter (3-12mm), offset distance (10-33mm), and face thickness (1-5mm). The results demonstrate a direct correlation between these parameters and the sandwich beam natural frequency.
This work is a Copper oxide (CuO) thin films were effectively produced using cold spray technique. The process take place in an inert gas (helium) without using catalyst. Nano CuO was deposited on a glass slide, using helium as carrier gas heated to 100, 200, 300, and 400 °C, respectively on heated glass substrates at 300°C. The effect of structural and electrical properties was examined at each temperature for each film. AFM images show that the CuO thin film have different diameters ranging from 80 to 600 nm, and low surface roughness about 20.9 nm. The measured value of copper oxide resistivity was found to be decrease very much with the increasing temperature. All the result showed that copper oxide is suitable material for photovoltaic applications. This research is part of a larger work for the solar cells industry. Therefore, the aim of this research is to study the electrical properties of solar cells in the primary stages of manufacturing from available materials at low costs.
1 June 2020 in Current Issues in Pharmacy and Medical Sciences
Natural biopolymers are the most likely choice for biomedical applications, and starches can be considered the best materials for such applications. This comes from the fact of their natural origin and their high biodegradable behavior. Native starches have weak hydrogen bonding and a leaching behavior – making it a candidate for drug delivery application. Still, to make starch useful as a drug delivery carrier, this hydrogen bonding must be strengthened. In this work, native sweet potato starch was used, and the hydrogen bonding between starch molecules was enhanced by introducing glycerol as a hydrogen bonding source and sodium alginate (SA) as a thickener. This blend was tested by means of FTIR and DSC, and based on the test results, improved hydrogen bonding had taken place. Furthermore, potato starch microspheres were successfully produced at different flow rates. In the work, a microfluidic capillary device was harnessed to form microsphere generating total flow rates ranging between (0.00031 and 0.00054) cm3/sec. Herein, a starch/sodium alginate/glycerol mixture was used as a dispersed phase and PVA+tween 80 was used as continuous phase. At high flow rates (0.00062-0.00054) cm3/sec, the microspheres took an oval shape. At flow rates (0.00034-0.00048) cm3/sec, the microspheres took a spherical shape. At very low flow rate (0.00031) cm3/sec, the microspheres shell was weak and caused core oozing. In this work, starch microspheres were successfully formed with diameter ranging from (151-263) µm.
This study aimed to improve the morphological properties of Sikadur 52 epoxy resin by incorporating polyurethane (PU) and liquid silicone rubber (LSR) as toughening agents. The modifiers were added at various weight percentages (3, 6, 9, and 12%) and cured with a hardener. SEM analysis revealed microphase separation within the epoxy matrix, with distinct PU and LSR domains. FTIR analysis verified that addition of LSR strengthened some chemical bonds in the epoxy matrix, and SEM analysis provided direct information about phase separation behaviors of the modified epoxies. This micro-phase separation is believed to contribute to the enhanced mechanical properties of the modified epoxy resins
1 January 2024 in ARCHIVES OF ENGINEERING KNOWLEDGE
Nanoparticles have emerged as a promising tool for sustainable agriculture and biosafety. This review article examines the historical background of agricultural nanoparticles and explores different nanoparticles types, including Nano-emulsions, quantum dots, carbon nano tubes, Nano-rods, and Nano-encapsulation technology. Additionally, the review examines recent advances in the agricultural nanoparticles application, such as Nano-pesticides and Nano-fertilizers, and their potential effects on biosafety. Furthermore, the article discusses future prospects and challenges of the nanoparticles using in sustainable agriculture and biosafety. The potential ecological effects of nanoparticles and the need for responsible regulation and oversight are also highlighted. Overall, this review article emphasizes the significant potential of nanoparticles in sustainable agriculture and biosafety and the need for continued research and responsible development to ensure safe and equitable distribution of its benefits.
20 March 2026 in Journal of Vibration Engineering & Technologies