This paper proposes an integral volumetric imaging system that uses a coarse fly-eye lens and a fine fly-eye lens to show smooth and deep 3D image. Conventional integral volumetric imaging displays using a coarse fly-eye lens have suffered from low image quality due to distinct seam of lenses and moiré pattern caused by layered panel structure. To solve these problems the proposed system uses a fine fly-eye lens whose elemental lens has a long focal distance. By placing a fine fly-eye lens near the layered real image, the seam and the moiré are removed while the degradation of the presented 3D image is kept small.
Reduced resolution per view and limited viewing zone are the two main issues of autostereoscopic systems based on parallax barrier. Our previous system managed to deal with both of the two issues by using time-division quadruplexing and furthermore replacing the generated 4-view conventional image pattern with 2-view image pattern, where the same image is observed from two of the four viewpoints. However, lack of refresh rate leads to emergence of stripe-shaped noise, which occurs during blinks and horizontal saccades. In this paper, we introduce parallax barrier employing RGB (Red-Green-Blue) slits, where the RGB components of each image pixel are time-division multiplexed as well as the image resolution is. Our experiments with different color combinations show that a tradeoff exists between crosstalk and stripe noise. We also find that the barrier pattern RGBK (Red-Green-Blue-Black) provides the most balanced performance among all the tested combinations.
A novel (to the best of our knowledge) Fresnel lens array is proposed to realize a uniform directional backlight with two-dimensional directionality. Autostereoscopic display with the proposed lens array improves image output quality and relieves the viewer’s posture restriction without the need for any additional eye aid. In the proposed lens array, tiny prisms composing two adjacent linear Fresnel lenses are interleaved so that the two lenses may be virtually overlapped and work independently. The widths of the elemental prisms vary depending on the distance from the center of each lens. Thus, the light passing through the two lenses is mixed, which results in higher and more uniform luminance intensity. A prototype of an autostereoscopic display based on the time-multiplexed directional backlight method and made with the proposed lens array attained uniform luminance as well as low cross–talk between left-eye and right-eye images.
This paper presents a 3D display based on the coarse integral volumetric imaging (CIVI) technique. Though expression of focal effect and specular light is enabled by combining volumetric and multiview solutions, the image qualities of conventional systems have stayed low. In this paper high quality 3D image is attained with the CIVI technology, which compensates distortion and discontinuity of image based on the optical calculations. In addition, compact system design by layering color and monochrome panels is proposed.
15 July 2018 in Journal of the Society for Information Display