This study evaluates seismic mitigation methods, including high damping rubber bearing, lead rubber bearing, double sliding pendulum (DSP), and tuned mass damper (TMD), considering earthquake intensity, building height, and isolation level. Moreover, the study delves into a novel approach that incorporates multi-level isolation and multi-level TMD. Reinforced concrete buildings, ranging in height from 4 to 40 storeys, were nalysed and nalysed using SAP2000 under the seismic influence of the Badra, El Centro, and Northridge earthquakes. The study reveals a significant rise in the fundamental period (T) with base isolation systems, reaching 378% of the fixed base value for a six-storey building. Building height directly affects T values, with simplified equations introduced for calculation. DSP proves 5% more efficient in reducing base shear (BS), while TMD is effective in weaker earthquakes for minimizing lateral displacement. Base isolators outperform mid-level isolation and TMD at the top storey. Combining base isolators with TMD at the top storey is deemed impractical and uneconomical. The study recommends multilevel isolation or multilevel TMD for enhanced seismic isolation efficiency, with four-level isolation achieving an 80% reduction in BS for 12-storey buildings. In addition, four-level TMD outperforms TMD at the top storey with a 44.5% reduction in BS, surpassing the 26.6% reduction achieved with TMD at the top storey only.
27 February 2024 in Mathematical Modelling of Engineering Problems
Estimation of shear strength of steel fiber reinforced concrete (SFRC) beams is difficult because of the complex nonlinear interactions between fiber, geometry, and reinforcements. In this study, the hybrid machine learning (ML) and finite element analysis (FEA) method are utilized for estimating the load-carrying capacity (Pmax) of SFRC beams. A database of 257 SFRC beams was collected from literature and was pre-processed. Seven ML methods, including Decision Tree, AdaBoost, Linear Regression, k-Nearest Neighbors, Random Forest, Stochastic Gradient Descent, and Gradient Boosting, were applied on the database through the k-fold cross-validation technique. The best model was selected as Gradient Boosting due to R² > 0.93. By conducting SHAP analysis, longitudinal reinforcement ratio, height of the beam, and shear span-to-depth ratio were found to be the most important parameters. Using nonlinear FEA in Abaqus, the results of ML models were validated by comparing them with experimental and simulation results (∆ ≈ 4.79% and ∆ ≈ 0.14%, respectively). Through parametric studies, the positive influence of the volume fraction of fibers and reinforcement ratio and negative influence of shear span-to-depth ratio were determined. The suggested ML-FEA approach can be considered accurate and efficient for practical SFRC shear design.