Stretchable conductive inks (SCIs) have gained significant attention in recent years due to their potential applications in flexible and wearable electronics. Graphene nanoplatelet (GNP) hybridization conductive ink is a promising material for stretchable electronics due to its high electrical conductivity and excellent mechanical properties. However, the resistivity of GNP ink on flexible substrates can be affected by various factors, such as the torsion of the substrate. This paper aims to investigate the effect of torsional load in terms of the electrical and mechanical behaviour of hybridization conductive ink between GNP and Ag. The research was carried out on the formulation and performance of GNP hybrids using GNP and silver flakes (Ag). The GNP hybrid ink was printed on a copper substrate using a mesh stencil method and cured at 250 °C for an hour. The resistivity was evaluated at room temperature before and after the torsional tests in terms of electrical characteristics. The finding exposed that the resistivity values for each of the three samples of torsional tests significantly changed after 1000 cycles. Eventually, the resistance value at cycle 5000 rose due to the damaging impact of increasing the number of torsional cycles on the sample. In future work, it is recommended that the evaluation is made under temperature dependence and supported by SEM images.
10 July 2024 in Journal of Advanced Research in Applied Mechanics
Various efforts to improve the performance of printed conductive ink have been conducted in order to obtain its full performance potential. This includes the investigation on the effect of conductive filler particle size towards the electrical conductivity performance. This study focuses on the product condition and electrical performance of GNP/AgNP/SA as hybrid conductive filler components by varying the particle size of only one the filler component, which is GNP. The GNP/AgNP/SA formulation with organic solvent was used by preparing three samples utilizing different GNP particle sizes of 5 µm and 25 µm. The purpose of this experiment is to collect data on the electrical conductivity of ink when employed in circuits and determine the best formulation of conductive ink. The obtained results revealed differences between the inks produced using 5 µm and 25 µm of GNP sizes. The resistivity of the 5 µm samples were was lower than 25 µm samples. The GNP of 5 µm recorded the lowest resistivity of 2.48 x 10-5 Ω.m as compared to 2.63 x 10-5 Ω.m recorded by 25 µm samples. The lower resistivity value indicates that the conductive ink formulated using 5 µm of GNP size has better electrical conductivity performance. The results signify that by using different particle sizes of only one component of hybrid conductive fillers produced different conductive ink performance, especially the electrical conductivity.
20 January 2024 in Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
The evaporation characteristics of a single fuel droplet of diesel fuel (DF) and the Malaysian palm oil biodiesel-diesel blend (B10-B50) were studied experimentally. The fuel droplet properties consisted of different ratios of palm oil biodiesel mixtures which could influence the droplet behaviour when impinged on the heated surface. By employing the hot surface deposition test (HSDT) method, the droplets impinging on the heated surface of an aluminum alloy plate were observed to evaluate the droplet's evaporation characteristics including the evaporation lifetime and maximum evaporation point (MEP) of the tested fuels. Furthermore, the deposit’s surface temperature for dry condition (timp=7 seconds) and wet condition (timp=3 seconds) test were also measured during the deposition test. Finally, the deposit development on the heated surface was evaluated through a logarithmic expression of MR/mD = αNDβ. The results showed that the evaporation lifetime of each test fuel decreased with increasing hot plate surface temperature. Furthermore, the MEP was the highest for B30 (380°C), followed by B20 and B40 (375°C), B10 and B50 (365°C), and DF (360°C). In the dry condition test, the recorded average minimum and maximum deposit surface temperatures were observed to be within the range of Td=295°C to Td=325°C for DF and Td=290°C to Td=350°C for B10-B50 fuels. On the other hand, for the wet condition test, the recorded average minimum deposit surface temperatures for both DF and B10-B50 fuels were consistently lower than the hot plate temperature. DF exhibited the most variation, ranging from Td=200°C to Td=300°C, whereas, for B10-B50, the recorded deposit surface temperature was only ranging from Td=150°C to Td=200°C.
10 July 2024 in Journal of Advanced Research in Applied Mechanics
This research aims to develop and formulate a highly thermal graphene hybridization conductive ink combining graphene nanoparticles (GNP), silver flakes (Ag), and silver acetate (SA) as conductive fillers mixed with chemical and organic solvents. With improved properties, it overcomes the limitations of traditional materials while preserving their beneficial characteristics. The study evaluates how the resistivity and properties of the material change in response to environmental factors such as temperature and humidity and how these changes impact its performance in various applications. To develop a highly thermal graphene hybridization conductive ink, a new formulation of conductive ink was formulated using graphene nanoparticles (GNP), silver flakes (Ag), and silver acetate (SA) as conductive fillers mixed with organic solvents. In order to turn the batch of substances into a powder, they were sonicated and followed by stirring to form the mixture into a powder. Before curing at 250oC for 1 hour, the powder was dripped with organic solvents, 1-butanol, and terpineol and mixed using a thinky mixer machine to form a paste. Using a mesh stencil, the GNP hybrid paste was printed on copper substrates. With a scraper, the hybrid GNP paste was applied to the selected grid (3mm x 3mm) on three selected points of the substrate strip. In order to evaluate the performance, the resistivity of the hybrid GNP conductive ink at room temperature was set as the baseline and compared to the resistivity readings obtained at varying temperatures-humidity levels. GNP hybrid room temperature baseline and GNP hybrid after applying different temperature-humidity were compared in terms of electrical and mechanical properties. The average resistivity measurement at all points of the sample remained stable or decreased as the temperature increased. It demonstrates that the electrical conductivity of the ink degrades significantly as the temperature-humidity increases. This indicates that the ink is able to maintain its structural integrity and properties within certain temperature ranges. This signifies that a hybrid conductive ink has good thermal stability. Future work should investigate the strategies for improving the ink's performance under mechanical deformation, such as the use of additives or novel printing techniques.
30 November 2024 in Journal of Advanced Research in Micro and Nano Engineering
This paper presents the preparation of a new formulation of hybrid GNP/Ag conductive ink with a specific ratio of organic solvent to optimize the properties of hybrid conductive ink. The GNP/Ag hybrid conductive ink was formed with a different ratio of organic solvents which are 33:67,60:40,67:33 and 40:60 of 1-butanol to terpinol which the ratio of conductive filler is higher than the organic solvent. The performance of each ink was examined in terms of bulk resistance and resistivity where the conductive ink was prepared on the copper substrate and cured for five hours in the oven at a temperature of 250°C and underwent a cyclic bending test. Results indicate that the 40:60 ratio of 1-butanol to terpinol is the best ratio for GNP/Ag hybrid conducive ink with a bulk resistance of 0.600Ω and resistivity of 3.6x10-4Ωm. For further exploration, the curing time should remain five hours at a different curing temperature.
1 February 2016 in IOP Conference Series: Materials Science and Engineering
This paper presents the analysis of parameter assessment on laminated rubber-metal spring (LR-MS) for vibrating structure. Three parameters were selected for the assessment which are mass, Young's modulus and radius. Natural rubber materials has been used to develop the LR-MS model. Three analyses were later conducted based on the selected parameters to the LR-MS performance which are natural frequency, location of the internal resonance frequency and transmissibility of internal resonance. Results of the analysis performed were plotted in frequency domain function graph. Transmissibility of laminated rubber-metal spring (LR-MS) is changed by changing the value of the parameter. This occurrence was referred to the theory from open literature then final conclusion has been make which are these parameters have a potential to give an effects and trends for LR-MS transmissibility.