This article aims to optimise the structure of a press machine to enhance its stability and accuracy, as well as reduce the frame deformation during processing. The outer supporting frame of the JH31-250 press machine (Zhejiang Weili Forging Machinery Co., Ltd, Shaoxing, China) is used as a typical sample for exploring optimisation. Commercial software is utilised to conduct a finite element analysis on the three-dimensional model of the press machine frame. A topological optimisation algorithm using the solid isotropic microstructures with penalisation (SIMP) method is then applied to improve the structure of the press frame. The size of the topological structure is further refined with the response surface method and particle swarm optimisation method to ensure it is more relevant to engineering application. The analysis results indicate that the initial frame’s deformation under the static conditions is 0.4229 mm, and after optimisation, the deformed structural displacement is 0.2548 mm, a decrease of 39.75%. Additionally, a simplified experimental method is designed to effectively validate the simulation and the proposed design.

With the rapid development of additive manufacturing technology, selective laser melting (SLM) of austenitic stainless steel has been widely used. SLM stainless steel will inevitably deform during service, so it is necessary to study the microstructure and macro properties of post-plastic deformed SLM stainless steel. In this paper, the changes in the microstructure, mechanical properties, and corrosion resistance of SLM304 stainless steel after stretch deformation were studied, and the evolution rules were revealed. The results show that, with an increasing plastic deformation amount, SLM304 stainless steel exhibits grain fragmentation, disordered orientation, and subgrain formation, along with changes in the shape and size of the cellular structure. Additionally, the α’ martensite content inside SLM304 stainless steel rises significantly, while the thickness of the surface passivation film slightly decreases. The analysis shows that the combined effect of the complex microstructure makes the nanohardness of SLM304 stainless steel increase with the increase in the stretch deformation amount while its corrosion resistance deteriorates. Therefore, moderate post-plastic deformation can enable SLM stainless steel to balance excellent mechanical and corrosion properties. This study can not only provide a theoretical reference for the performance optimization of additive manufacturing steel but also provide value for the engineering application of additive manufacturing technology.

The local corrosion resistance of forging and selective laser melting (SLM) 304 steels was explored by intergranular corrosion analysis, double-loop electrochemical potentiodynamic reactivation, dynamic polarization experimentation, structural analysis, and passivation film characteristics analysis. The ability to resist sensitization of SLM 304 steel is greater than that of forging 304 steel at a temperature of 650 °C for 9 h. Moreover, the pit corrosion resistance of forging and SLM 304 steels is weakened by sensitization, while the pit corrosion resistance of SLM 304 steel is much greater than that of forging steel. Therefore, SLM technology can improve the ability to resist sensitization and pit corrosion of 304 steel. Analysis showed that the ability to resist corrosion of the passivation film of SLM 304 steel is greater than that of forging steel. In addition, corrosion pits are easier to generate at the interface of forging steel and SLM 304 steel. The grain boundary corrosion of SLM 304 steel intensified while the corrosion of the melt pool boundaries weakened after the sensitization treatment, resulting in a decrease in pit corrosion resistance. The coupling effect of these different structures and passivation films decides the pit and sensitization resistance of forging and SLM 304 steels. Clarifying the corrosion mechanism of forging and SLM steels is of great significance for scientific research and the widespread use of SLM technology.

Austenitic stainless steel inevitably undergoes deformation during application, and it is necessary to study the properties of deformed steel. This article investigates the evolution of microstructure, mechanical properties, and corrosion resistance of plastic-deformed 304 steel, the evolution law of structure and properties of steel is revealed. As a result, it was found that with the increase in deformation, the grains of 304 steel were destroyed, and many small subgrains were generated internally, resulting in a significant decrease in grain size. At the same time, the content of martensitic transformation in stainless steel increased significantly. The characteristics of the surface passivation film of stainless steel also change during the deformation process. Meanwhile, with the increase in deformation, the nanohardness and wear resistance of 304 steel gradually increase, but its corrosion resistance gradually decreases. Analysis suggests that microstructural changes such as grain size and phase transformation in stainless steel lead to an improvement in its mechanical properties, while the generation of defects during deformation and changes in surface passivation film characteristics result in a deterioration of its corrosion resistance. This study can provide a reference for the forming and performance optimization of metals and has high theoretical significance and practical value.

This article conducts intermittent tensile deformation on 304 stainless steel; observes the microstructure, mechanical properties, and corrosion performance evolution of stainless steel under different deformation conditions; and reveals its mechanisms. The results indicate that the performance of 304 stainless steel is significantly affected by the degree of intermittent deformation. Small intermittent deformation can produce a good microstructure with uniform distribution, low martensite content, and weak texture, optimizing comprehensive mechanical properties by improving ductility, yield strength, and tensile strength. On the contrary, excessive intermittent deformation increases martensitic transformation and enhances texture, leading to a transition from ductile fracture to brittle fracture. In addition, small intermittent deformations improve corrosion resistance by promoting the formation of a stable passivation film. The microstructural changes affect the deformation mechanism and surface passivation film of stainless steel, making its mechanical strength and corrosion resistance superior to larger intermittent deformation amounts. Small intermittent deformation can improve the mechanical and corrosion properties of 304 stainless steel. This study provides a reference for the formation and performance control of metal materials and has certain practical value.

It is crucial to investigate methods for improving the stiffness performance of machine tools according to their specific dynamic working conditions. This paper presents a complete computer-aided workflow for structural transient topology optimization (TO) design, which is applied to the structural design issue of the JH31-250 press machine (Zhejiang Weili Forging Machinery Co., Ltd., Shaoxing, China). The stiffness influenced by the shape of the press frame under long-term dynamic impact load is analyzed, and an optimal design for the frame structure of the press machine is explored. In order to reduce the iteration time of the dynamic analysis, we also proposed a way to simplify the physical structure of the machine tool into a thin-walled structure model with artificial pseudo-density and introduced the hybrid cellular automata (HCA) criterion to obtain the topological iteration direction. This simplified model can be transformed back into 3D solid design of the press. The maximum relative displacement of the worktable in this optimized press model is 0.4896 mm, which is reduced by 31.02% compared to the original press model, which shows that the transient dynamic stiffness of the press machine frame is improved. This work presents a topological optimization method and path, which can be used for the optimization of dynamic stiffness in forging machine tools, and proves the correctness and effectiveness of the design for the transient dynamic stiffness of the frame.