Shubham Chaudhary

Dr. Shubham Chaudhary

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 February 2025 in Resources
Verified
Journal Article
Open access
PDF file
Suhas DrSuhas Dr
Suhas Dr
DCDr Monika Chaudhary
Dr Monika Chaudhary
SCShubham Chaudhary
Shubham Chaudhary
SCShivangi Chaubey
Shivangi Chaubey
Isabel Pestana Paixão CansadoIsabel Pestana Paixão Cansado
Isabel Pestana Paixão Cansado
RGRama Gaur
Rama Gaur
Hydrothermal carbonization (HTC) is an environmentally friendly process for transforming biomass into sustainable hydrochar, which is a carbon-rich material with a variety of potential applications. Herein, Tectona grandis seeds (TGs) were transformed into hydrochars using HTC at low temperatures (180–250 °C) and autogenous pressure. The prepared hydrochars were rich in oxygenated functional groups. The optimized hydrochar, HC-230-4 (prepared at 230 °C, for 4 h), presented a ratio of H/C = 0.95 and O/C = 0.29, an improved degree of coalification, and a high heating value (26.53 MJ kg−1), which can replace bituminous coals in the power sector. The prepared hydrochar was further activated in the presence of CO2 to prepare activated carbon (AC). XRD, TGA, FTIR, FE-SEM, and BET techniques were used to characterize raw biomass (TGs), hydrochar, and ACs, to identify the potential applications for the developed materials. BET studies revealed that the hydrochar has limited porosity, with a low surface area (14.41 m2g−1) and porous volume. On the other hand, the derived AC (AC-850-5) has a high surface area (729.70 m2g−1) and appreciable total and microporous volumes (0.392 cm3g−1 and 0.286 cm3g−1). The use of biomass, mainly waste biomass, for the production of carbon-rich materials is an effective strategy for managing and valorizing waste biomass resources, reducing environmental pollution, and improving sustainability, being in line with the principles of circularity.

19 October 2022 in Agronomy
Verified
Journal Article
Open access
PDF file
DCDr Monika Chaudhary
Dr Monika Chaudhary
Suhas DrSuhas Dr
Suhas Dr
SKSarita Kushwaha
Sarita Kushwaha
SCShubham Chaudhary
Shubham Chaudhary
Inderjeet TyagiInderjeet Tyagi
Inderjeet Tyagi
Minaxi SharmaMinaxi Sharma
Minaxi Sharma
The present investigation deals with the importance of interaction and position of the nitro group in the adsorptive removal of 2-nitrophenol (2-NP), 4-nitrophenol (4-NP) and phenol by demineralized kraft lignin activated carbon (DKLAAC). The adsorption of phenol and NPs on DKLAAC was found to follow the order 2-NP > 4-NP > phenol. In this study, both solubility and donor–acceptor complex mechanism played an important role besides the porosity and surface area of the materials. Accordingly, the NP possessing the least solubility would noticeably exhibit a higher affinity to be adsorbed at the solid–liquid interface. Thus the highly hydrophobic 2-NP was adsorbed to a greater extent followed by 4-NP and phenol. Moreover, the adsorption capacity as affected by contact time, initial phenol concentration, pH, and temperature was also investigated. The experimental adsorption capacity by DKLAAC was 2.09, 2.34, and 2.20 mmol·g−1 for phenol, 2-NP, and 4-NP at 25 °C, respectively, with the maximum amount being adsorbed within 40 min. The experimental data obtained for the removal of phenol and NPs were adequately fitted by the Langmuir adsorption isotherm and pseudo-second order kinetic models. Additionally, the temperature study revealed the adsorption process to be endothermic and spontaneous with high affinity between DKLAAC and phenols.

23 May 2022 in Molecules
Verified
Journal Article
Open access
PDF file
SKSarita Kushwaha
Sarita Kushwaha
SSSuhas Suhas
Suhas Suhas
DCDr Monika Chaudhary
Dr Monika Chaudhary
Inderjeet TyagiInderjeet Tyagi
Inderjeet Tyagi
Rakesh BhutianiRakesh Bhutiani
Rakesh Bhutiani
SCShubham Chaudhary
Shubham Chaudhary
In the present work, an effort has been made to utilize Phyllanthus emblica (PE) fruit stone as a potential biomaterial for the sustainable remediation of noxious heavy metals viz. Pb(II) and Cd(II) from the aqueous solution using adsorption methodology. Further, to elucidate the adsorption potential of Phyllanthus emblica fruit stone (PEFS), effective parameters, such as contact time, initial metal concentration, temperature, etc., were investigated and optimized using a simple batch adsorption method. It was observed that 80% removal for both the heavy metal ions was carried out within 60 min of contact time at an optimized pH 6. Moreover, the thermodynamic parameters results indicated that the adsorption process in the present study was endothermic, spontaneous, and feasible in nature. The positive value of entropy further reflects the high adsorbent–adsorbate interaction. Thus, based on the findings obtained, it can be concluded that the biosorbent may be considered a potential material for the remediation of these noxious impurities and can further be applied or extrapolated to other impurities.

31 January 2025 in Processes
Verified
Journal Article
Open access
PDF file
SCShubham Chaudhary
Shubham Chaudhary
DCDr Monika Chaudhary
Dr Monika Chaudhary
VTVaishali Tyagi
Vaishali Tyagi
SCShivangi Chaubey
Shivangi Chaubey
Suhas DrSuhas Dr
Suhas Dr
Jahangeer AhmedJahangeer Ahmed
Jahangeer Ahmed
Porous carbon materials can serve as effective and versatile adsorbents in water pollution management. This study presents a cost-effective and environmentally friendly method to produce porous carbon materials (JFS-PC) by exploiting Jamoya fruit seeds (JFS) as a precursor using a hydrothermal carbonization (HTC) process. HTC is a thermochemical process for the conversion of high moisture content biomass into carbon-rich materials. The process is performed in a temperature range of 180–250 °C during which the biomass is submerged in water and heated in a sealed environment under autogenous pressure. The adsorbents obtained were explored using different techniques viz. XRD, FTIR, FE-SEM, and surface area analyses to evaluate their characteristics that are beneficial for the adsorption process. Surface area analysis revealed that the developed activated carbon exhibits appreciable surface area (440.8 m2g−1), with a mean pore diameter of 3.97 nm. Activated carbon was successfully tested on the removal of an azo dye, Carmoisine B (CB), from water systems. Isothermal and kinetic evaluation demonstrated that the dye adsorption agrees well with the Langmuir (R2 = 0.993) and pseudo-second-order (R2 = 0.998) kinetics models. The experiments were designed to investigate the influence of adsorbate concentration (1 × 10−4 and 2 × 10−4 mol L−1), collision time (5–300 min), pH (2–12) of the solution, and temperature (25–45 °C) on the adsorption of the selected dye. The results revealed that pH influences the adsorption capacity of CB and showed maximum adsorption between pH 2 and 5. Experimentally, the CB isotherms showed maximum adsorption capacities of 169.0 mg g−1, at 45 °C. Mechanisms indicate that the surface charge of the adsorbent, and structures of the adsorbate play key roles in adsorption. Thermodynamic parameters revealed an endothermic and a physisorption process supported by Van’t Hoff calculations. The study indicates that the developed porous carbon (JFS-PC) can be successfully used for the removal of CB from water systems. It also highlights the use of an inexpensive and renewable precursor for the development of porous carbon materials.

1 January 2021 in Desalination and Water Treatment
Verified
Journal Article
Closed access
DCDr Monika Chaudhary
Dr Monika Chaudhary
SSSuhas Suhas
Suhas Suhas
RSRandhir Singh
Randhir Singh
MYMurat Yilmaz
Murat Yilmaz
SCShubham Chaudhary
Shubham Chaudhary
SKSarita Kushwaha
Sarita Kushwaha

30 November 2024 in Toxics
Verified
Journal Article
Open access
PDF file
Suhas DrSuhas Dr
Suhas Dr
SKSarita Kushwaha
Sarita Kushwaha
DCDr Monika Chaudhary
Dr Monika Chaudhary
SCShubham Chaudhary
Shubham Chaudhary
VTVaishali Tyagi
Vaishali Tyagi
MDMohammad Hadi Dehghani
Mohammad Hadi Dehghani
In this study, the novel activated carbon developed from Phyllanthus emblica fruit stone, through hydrothermal treatment at low pressure and temperature, was utilized for the removal of 4-nitrophenol, 4-chlorophenol, and phenol from water. The activated carbon produced (AC-HTPEFS) showed a well-developed porosity with a surface area of 569 m2 g−1 and a total pore volume of 0.342 cm3 g−1. The adsorption process was explored and efficiently applied regarding the removal of phenols and substituted phenols from wastewater. Thermodynamic analyses indicated that the adsorption process was endothermic and spontaneous. To analyze the equilibrium data, different isotherm models were employed. The Langmuir model applied best, with maximum adsorption capacities of 0.463, 0.434, and 0.387 mmol g−1 at 25 °C for 4-nitrophenol (4-NP), 4-chlorophenol (4-CP), and phenol, respectively, regarding the AC-HTPEFS. The adsorption was mainly an endothermic process, and the results achieved were slightly higher than those obtained with a commercial activated carbon commonly used for this purpose.