Communication-sensing integration represents an up-and-coming area of research, enabling wireless networks to simultaneously perform communication and sensing tasks. However, in urban cellular networks, the blockage of buildings results in a complex signal propagation environment, affecting the performance analysis of integrated sensing and communication (ISAC) networks. To overcome this obstacle, this paper constructs a comprehensive framework considering building blockage and employs a distance-correlated blockage model to analyze interference from line of sight (LoS), non-line of sight (NLoS), and target reflection cascading (TRC) links. Using stochastic geometric theory, expressions for signal-to-interference-plus-noise ratio (SINR) and coverage probability for communication and sensing in the presence of blockage are derived, allowing for a comprehensive comparison under the same parameters. The research findings indicate that blockage can positively impact coverage, especially in enhancing communication performance. The analysis also suggests that there exists an optimal base station (BS) density when blockage is of the same order of magnitude as the BS density, maximizing communication or sensing coverage probability.
Benefit from the development of satellite communication technology, low earth orbit (LEO) satellite network is poised to be a critical technology for the sixth generation (6G) communication technology. LEO satellites within the constellation and between different constellations can route data from node to node through intersatel-lite link, improving the continuous transmission of service data and space-based in-orbit service capabilities. However, traffic in the network varies over time, while the mobility of LEO satellites causes the network topology to change over time, raising a problem that requires instantaneous routing updates based on the satellite network state and topology. Motivated by this, in this paper, we propose a CNN-based real-time routing scheme with the overall goal of minimizing the service data flow delay. In the simulation scenario, experimental results show that compared with the shortest path first algorithm (SPF), the algorithm proposed in this paper can reduce the data flow completion time (FCT) by 10%.
Satellite fog computing (SFC) achieves computation, caching, and other functionalities through collaboration among fog nodes. Satellites can provide real-time and reliable satellite-to-ground fusion services by pre-caching content that users may request in advance. However, due to the high-speed mobility of satellites, the complexity of user-access conditions poses a new challenge in selecting optimal caching locations and improving caching efficiency. Motivated by this, in this paper, we propose a real-time caching scheme based on a Double Deep Q-Network (Double DQN). The overarching objective is to enhance the cache hit rate. The simulation results demonstrate that the algorithm proposed in this paper improves the data hit rate by approximately 13% compared to methods without reinforcement learning assistance.
Satellite computing represents a recent computational paradigm in the development of low Earth orbit (LEO) satellites. It aims to augment the capabilities of LEO satellites beyond their current transparent relay functions by enabling real-time processing, thereby providing low-latency computational services to end users. In LEO constellations, a significant deployment of computationally capable satellites is orchestrated to offer enhanced computational resources. Challenges arise in the optimal allocation of terminal services to the most suitable satellite due to overlapping coverage among neighboring satellites, compounded by constraints on satellite energy and computational resources. The satellite service allocation (SSA) problem is recognized as NP-hard, yet assessing allocation methods through results allows for the application of deep reinforcement learning (DRL) to obtain improved solutions, partially addressing the SSA challenge. In this paper, we introduce a satellite computing capability model to quantify satellite computational resources. A DRL model is proposed to address service demands, computational resources, and resolve service allocation conflicts, strategically placing each service on appropriate servers. Through simulation experiments, numerical results demonstrate the superiority of our proposed method over baseline approaches in service allocation and satellite resource utilization, showcasing advancements in this field.
16 January 2026 in IEEE Transactions on Vehicular Technology
Unmanned Aerial Vehicle (UAV) networks have evolved tremendously to provide pervasive intelligence services, handle compute-intensive and latency-sensitive tasks, and free up more network resources. However, time-varying channel gains and dynamic UAV locations hinder better offloading performance and reduce quality of service. Therefore, we propose a UAV-based computation offloading model to maximize the throughput of terrestrial users while reducing the privacy overhead. Based on an on-board battery energy harvesting technologies, we propose a multi-agent proximal policy optimization method to optimize the CPU cycle frequency and offloading decisions that further extend the UAV execution time. Then present a federated learning-based privacy protection framework to generate the optimal block size. In addition, we demonstrate the long-term energy queue constraint through massive mathematical derivations. Finally, extensive simulation results show that the proposed algorithm has better performance gains in terms of throughput and privacy protection overhead compared to some advanced benchmarks.
Reliable temperature monitoring is essential for the thermal management and safe operation of modern telecommunication equipment. However, conventional temperature sensors are often relatively large and rigid, which limits their applicability for localized temperature measurement on compact electronic components. In this study, a flexible thin-film thermocouple based on NiCr–NiSi thermoelectric materials was developed for temperature monitoring of telecommunication equipment. The sensor adopts a multilayer structure consisting of a polyimide (PI) flexible substrate, an Al2O3 insulating layer, NiCr and NiSi thermoelectric films, and a SiO protective layer and was fabricated using magnetron sputtering. Static calibration experiments show that the fabricated sensor exhibits a thermoelectric sensitivity of approximately 40.45 µV/°C, which is close to the reference value of conventional K-type thermocouples, with a relative error of about 1.34%. Repeated heating–cooling cycles demonstrate good repeatability and stable thermoelectric characteristics. Dynamic tests under representative transient thermal conditions showed that the sensor could continuously capture temperature variations without signal interruption or abnormal fluctuations. To further quantify its dynamic behavior, a numerical step-response simulation was performed for the PI/Al2O3/NiCr–NiSi/SiO multilayer structure. The simulated thermal time constant and curve-extracted 90% response time were 0.0343 s and 0.0803 s, respectively, under the specified boundary conditions. Owing to its small thickness, low thermal mass, and good mechanical flexibility, the proposed thin-film thermocouple can be conformally attached to compact and curved electronic surfaces, indicating promising potential for real-time localized temperature monitoring of telecommunication equipment and other compact electronic systems.