Operation principle and design approach of a novel planar end-lire circularly polarized (CP) complementary antenna is proposed. A vertically polarized printed magnetic dipole and a horizontally polarized printed dipole are combined on the same substrate, and a planar CP antenna with end-lire beam in parallel with its plane is thus designed. Prototype antennas centered at 5.80 GHz are then fabricated and measured to validate the operation principle and the design approach. The experimental prototype reported that the impedance bandwidth (20 log |S ₁₁ | ( <; -10 dB) is about 1.90%, from 5.75 to 5.86 GHz and the 3-dB axial ratio (AR) bandwidth is about 14.48%, from 5.19 to 6.00 GHz. Therefore, the proposed design is applicable as a low-prolile handheld reader antenna in radio-frequency identilication (RFID) systems.

A compact double equilateral U-shaped defected ground structure (DGS) unit is proposed. In contrast to a single finite attenuation pole characteristic offered by the conventional dumbbell DGS, the proposed DGS unit provides dual finite attenuation poles that can be independently controlled by the DGS lengths. A 2.4-GHz microstrip lowpass filter using five cascaded double U-shaped DGS units is designed and compared with conventional DGS lowpass filters. This low pass filter achieves a wide stopband with overall 30-dB attenuation up-to10 GHz and more than 42% size diminution.

In this paper, a tunable bandpass filter using cross-shaped multiple mode resonators (MMRs) and N:1 transformer based external quality factor tuning structures is proposed. The use of a cross-shaped MMR simplifies inter-resonators control while two Qe tuning structures are investigated and incorporated with the MMR to implement simultaneous center frequency agility and narrow and wide bandwidth tuning. Compared with traditional tunable filters, the proposed architecture requires less tuning elements and is easier to realize wideband and high-order tunable filters. Two examples (Filter I and II) are presented to validate the design. Both filters use a single MMR and six tuning elements to achieve a third-order wideband tunable filter. Filter I reports 58% center frequency tuning with constant bandwidth and 14%-64.4% fractional bandwidth (FBW) tuning when center frequency locates at 1 GHz. Filter II achieves larger frequency agility and wider FBW tuning of 82.9% and 95%, respectively, for the same bandwidth and center frequency of Filter I.

This paper describes a ZigBee-based wireless sensor network node for the ultraviolet (UV) detection of flame. The sensor node is composed of a ZnSSe UV photodetector, a current-sensitive front end including a high-gain current-to-voltage amplifier with 120 dB and a logarithm converter, and a transceiver operated at a 2.4-GHz industrial, scientific, and medical band. A passive photodetector is designed to have a cutoff at 360 nm and convert the UV emission of flame into picoamperes. Including mixed signal processing and ZigBee transmission, the speed of flame detection is as fast as 70 ms. The sensor node consumes only an average of 2.3 mW from a 3.3-V supply. The performance of a prototype sensor node was verified when the luminous flame was imaged onto the sensor node with different angles ranging from -30° to 30° and distances of 0.1, 0.2, and 0.3 m enabling effective fire safety applications.

A novel polarization rotation technique based on an artificial magnetic conductor (AMC) structure is proposed. A new polarization rotating reflective surface (PRRS) is designed using a newly proposed AMC as the unit cell. The height of the so-constructed PRRS is only 0.04 λ ₀ . Our theoretical analysis shows that the polarization rotation property of the new PRRS is due to an impedance imbalance which can be analyzed using an equivalent circuit model. In addition, two polarization rotation bands and a large polarization rotation bandwidth of 29.1% can be achieved by using the new PRRS. Moreover, the new PRRS is applied for the first time to design a low-profile dipole antenna for the generation of circular polarization radiation. Three polarization states are readily achieved. Both simulation and measurement results demonstrate good right-handed circular polarization with a broad axial ratio bandwidth and a large axial ratio beamwidth in both the xoz and yoz planes.

In this letter, a double U-shaped defected ground structure (DGS) is proposed to broaden impedance bandwidth of a microstrip-fed monopole antenna. The antenna structure consists of a simple trapezoid monopole with a DGS microstrip feedline for excitation and impedance bandwidth broadening. Measurement shows that the antenna has 10-dB return loss from 790 to 2060 MHz, yielding 112.4% impedance bandwidth improvement over that of traditional design.