Various stability criteria developed for high-entropy alloys are applied to compositions produced by mechanical alloying. While they agree with the annealed samples, these criteria fail to describe the as-milled metastable systems, highlighting the ability of mechanical alloying to overcome the limitations imposed by these criteria. The criteria are based on atomic size (Ω ≥ 1.1 and .6%) and/or electronegativity misfit, as well as on mixing enthalpy ( and ), or purely thermodynamic (; ; ). These criteria are applied to several compositions found in the literature and to two metastable fcc solid solutions produced by mechanical alloying with compositions Al0.75CoXFeNi with X = Cr and Mn. Single-phase microstructures are stable up to above 600 K, leading to more stable multiphase systems after annealing above this temperature. Mössbauer spectrometry shows that, whereas the alloy with Cr is paramagnetic in the as-milled and annealed state, the alloy with Mn changes from paramagnetic to ferromagnetic behavior (Curie temperature ~700 K) after annealing. Thermomagnetic experiments on annealed samples show for both compositions some hysteretic events at high temperatures (850 to 1000 K), probably ascribed to reversible ordering phenomena.
Herein, we analyze the defect structure of evaporated and solution-processed methyl ammonium lead iodide perovskite films using exclusively non-invasive photophysical analysis. By using a representation of time-resolved photoluminescence data in the form of an instantaneous decay rate vs a variable that depends on the density of carriers, we are able to identify patterns that can be univocally assigned to the presence of either shallow or deep traps. Furthermore, it allows quantifying the relative contribution of each defect type to carrier recombination. We find that as-synthesized solution-processed films present balanced concentrations of shallow and deep traps, while the latter are prevalent in evaporated ones. This defect landscape changes radically when films are exposed to the ambient atmosphere. The validity of this approach is demonstrated by employing the extracted values of the relevant photophysical parameters to accurately reproduce the experimentally observed dependence of the photoluminescence emission efficiency on the excitation intensity.