Aim of the research to verify the proposed calculating apparatus and accumulate new experimental data on the complex resistance of reinforced concrete structures, experimental studies of such structures made of high-strength concrete of circular and circular cross-section were conducted at the testing base of the South-West State University. Method is experimental-theoretical. Results of experimental research the plots of the deflections and rotation angles, the dependency of deformations of concrete according to the testimony of the outlets of electrodesorption with respect to the calculated cross section 1-1. The main deformations of elongation and shortening of concrete were determined; the reinforcement was selected in such a way that in the stage preceding the destruction, it reached fluidity, so the stresses in the reinforcement are known. It is established that for reinforced concrete structures made of high-strength concrete of circular cross-section, as a rule, there is the development of two cracks, i.e. the round shape of the cross-section slightly reduces the concentration due to the structure of high-strength concrete. For the annular section there were several cracks, of which stands out the one on which the destruction occurs. On the steps preceding the destruction, this crack begins to prevail over the rest and has a maximum opening width. On the basis of experimental studies of reinforced concrete structures made of high-strength concrete of square and box sections, reliable data on the complex stress-strain state in the studied areas of resistance, such as: the values of the generalized load of cracking , and destruction ,, its level relative to the limit load; the distance between the cracks at different levels of cracking (up to the moment of destruction, as a rule, two or three levels are formed); crack widths at the level of the axis of the working armature, at a distance of two diameters from the axes of the armature and along the entire crack profile at various stages of loading, from which it follows that the crack opening at the level of the axis of reinforcement in 2-3 times less compared with the crack opening on the removal of 1.5-2 diameters of the working axis (longitudinal and transverse) reinforcement; the coordinates of the spatial formation of cracks; schematic drawings on tablets of education, development and opening of cracks of reinforced concrete constructions in torsion with bending. Thus, the experimental studies and the result provide an opportunity to test the developed computational model and its working hypotheses for assessing the resistance of reinforced concrete structures made of high-strength concrete in torsion with bending.
24 September 2019 in Scientific journal “ACADEMIA. ARCHITECTURE AND CONSTRUCTION”
В статье описываются конструкции административного здания комплекса «Лахта Центр» высотой 462 м. Конусообразное здание имеет в плане форму пятиконечной звезды, с этажами в виде пяти квадратных «лепестков», соединённых между собой и с круглым центральным ядром. По мере увеличения высотной отметки квадратные «лепестки» вращаются вокруг своей оси против часовой стрелки с поворотом в пределах каждого этажа на угол 0,82 градуса. Железобетонное центральное ядро и сталежелезобетонные колонны опираются на коробчатый фундамент, располагаемый на 264 сваях диаметром 2,0 м.
The “Lakhta Center” skyscraper that built up in Saint-Petersburg on the coast of Baltic sea at the end of 2018 is the highest building of Europe. The tower has 87 floors above the ground and 2 underground floors. The distinctive paper is devoted to structures of this skyscraper. Particularly piled foundation, building structures of the underground part (substructure), building structures of the aboveground part (building superstructure), designs of steel-reinforced concrete columns, design of slabs, structural analysis, some loads and impacts, aerodynamic tests, engineering-geological research, testing of steel-reinforced concrete columns, glass racks and structural health monitoring are under consideration.
24 December 2024 in International Journal for Computational Civil and Structural Engineering
The features of the behavior of steel-plate composite walls for static short-term loads are considered. Based on the analysis of modern technical and regulatory documentation, the rationale for the chosen research topic is given. A review of the literature is performed, and the features of development are noted. Description and features of the experimental structures are presented. Analytical and numerical calculations of structures for central compression have been performed. A description of the calculation complex is presented; a description of numerical models, features of their construction and calculation are given. Calculation results are presented – features of changes in structural rigidity during load application. The general types of experimental models tested for central compression are presented, and the destruction pattern is shown. The analysis of the experimental data obtained and their comparison with analytical and numerical calculations are performed. An assessment of the features of modeling steel-plate composite structures in software complexes is given.
The features of the work composite steel and concrete structure with steel-plate reinforcement during bending are considered. The models are described, the features of the models, materials and their characteristics are given. The description of experimental equipment, schemes of testing and loading of structures is given. Schemes and types of fracture, graphical results of bending tests of models are presented. A comparison of theoretical and experimental data on the first and second groups of limiting states – strength, deflections, and crack opening width, has been performed. An assessment of the existing regulatory approaches in relation to composite steel and concrete structure with steel-plate reinforcement is given. Correction coefficients are proposed for the calculation for the second group of limit states of steel and concrete structure with steel-plate reinforcement.