MoS2 is a two-dimensional layered transition metal dichalcogenide with unique electronic and optical properties. The fabrication of ultrathin MoS2 is vitally important, since interlayer interactions in its ultrathin varieties will become thickness-dependent, providing thickness-governed tunability and diverse applications of those properties. Unlike with a number of studies that have reported detailed information on direct bandgap emission from MoS2 monolayers, reliable experimental evidence for thickness-induced evolution or transformation of the indirect bandgap remains scarce. Here, the sulfurization of MoO3 thin films with nominal thicknesses of 30 nm, 5 nm and 3 nm was performed. All sulfurized samples were examined at room temperature with spectroscopic ellipsometry and photoluminescence spectroscopy to obtain information about their dielectric function and edge emission spectra. This investigation unveiled an indirect-to-indirect crossover between the transitions, associated with two different Λ and K valleys of the MoS2 conduction band, by thinning its thickness down to a few layers.
In this paper fabrication technology and nickel catalyst thickness dependence of output characteristics of direct Urea, KOH and Urea- KOH)/Ni/PS/Si proton exchange membrane type fuel cells are presented. The nominal thicknesses of 10–50 nm nickel as catalyst films and the solutions with concentrations of urea (CO (NH 2 ) 2 ) 0.5M, potassium hydroxide (KOH) 3M and Urea 0.5M – KOH 3M as anode electrodes were used in the cells. XRD and spectroscopic ellipsometry measurements were used for nickel catalyst characterization. Effects of nickel catalyst thickness and type of electrodes on maximum power density and open circuit voltage were investigated at room temperature and ambient atmosphere of 30–40% humidity. The best output characteristics of W = 10.5 mW/cm 2 and Voc = 0.6 V were observed at urea-KOH electrode and 10 nm of nickel catalyst thickness. Possible reason of this phenomenon is discussed on the basis of size effect, which may occur at ultrathin thicknesses of the nickel catalyst.
3 November 2026 in The Journal of Physical Chemistry Letters