Microvia filling by copper electroplating was carried out using a plating bath with a triblock copolymer comprised of propylene oxide (PO)-ethylene oxide (EO)-propylene oxide (PO) (named PEP) and bis– (3–sulfopropyl) disulfide (SPS) as the suppressor and the accelerator respectively, the suppression function of the triblock copolymers suppressors and their synergistic effect with other additives during copper electroplating were studied by galvanostatic measurements (GMs) and the cyclic voltammetry (CV), the results of GMs revealed that the suppression of PEP on copper electrode position strongly depended on the chloride ion (Cl−). In addition, the CV measurements indicated that a given Cl− in the plating bath required an optimal suppressor concentration to realize the strongest suppression strength. The negative values of the standard free energy of adsorption (ΔG0ads) suggest that the adsorption of SPS onto the cathode surface was a spontaneous process and physisorption was dominant in the plating formula. An optimal copper plating solution composed of CuSO4, H2SO4, PEP, SPS, chloride ions, and Janus Green B (JGB) was developed and used to perform bottom-up copper filling of microvias.
A novel flame retardant containing phosphorus, nitrogen and silicon was synthesized in this study. Its structure was characterized by Fourier transformed infrared spectrometry and 1H nuclear magnetic resonance. The flammability and thermal stability of the cotton fabric treated by the flame retardant was systematically evaluated by the limiting oxygen index (LOI) method, vertical combustion method and thermogravimetric analysis (TGA). The breaking strength, tearing strength and wrinkle recovery angle (WRA) of the treated fabric were also investigated to analyze the effects of the flame retardant on the original cotton fabric. The optimal parameters of the anti-flame finishing process conditions were flame retardant phosphorus/nitrogen/siloxane of 200 g/L, catalyzer of 25 g/L, curing temperature of 170℃, curing time of 3 min, pH 5.The results showed that the treated fabric was an excellent flame retardant, LOI was improved from 18.0 to 27.1 and its anti-crease property was obviously improved, as WRA increased from 80° to 98°. The TGA curves also suggested that the flame retardant had a good ability of char formation due to the synergistic effect of phosphorus, nitrogen and silicon. Through the wash fastness analysis, the LOI value of the treated sample remained at 23.3 compared with 18.0 of the untreated sample, which meant a durability flame-retarding effect.