Scalable video streaming over femtocell networks relying on two-tier spectrum-sharing is designed for coping with time-varying channel conditions, stringent video QoS requirements as well as with strong cross-tier interference between the over-sailing macro-and the femtocells. Dynamic video layer selection and resource allocation are invoked to enable the adaptation of the scalable video streaming service to the dynamics of both channel quality and interference price fluctuations. We formulate the design as a constrained stochastic optimization problem, which strikes a compelling compromise between the perceivable quality of experience and the monetary implications of the interference. Since the time scale of resource allocation is more short-term than that of the video layer selection, we decompose the original long-term utility optimization problem into a pair of readily tractable subproblems with the aid of two different time-scales by invoking the powerful technique of Lyapunov drift and optimization. By exploiting the specific structure of these subproblems, low-complexity algorithms are derived for dynamic video layer selection and resource allocation, which rely on the near-instantaneously available information rather than on any prior statistical knowledge. Finally, we derive the analytical bounds of the theoretically achievable performance. Experimental results are presented for characterizing the performance attained.

Emerging technologies, such as the Internet of Things, smart applications, smart grids, and machine-to-machine networks stimulate the deployment of autonomous, self-configuring, large-scale wireless sensor networks (WSNs). Efficient energy utilization is crucially important in order to maintain a fully operational network for the longest period of time possible. Therefore, network lifetime (NL) maximization techniques have attracted a lot of research attention owing to their importance in terms of extending the flawless operation of battery-constrained WSNs. In this paper, we review the recent developments in WSNs, including their applications, design constraints, and lifetime estimation models. Commencing with the portrayal of rich variety definitions of NL design objective used for WSNs, the family of NL maximization techniques is introduced and some design guidelines with examples are provided to show the potential improvements of the different design criteria.

Large-scale multiple-input and multiple-output (MIMO) systems are capable of achieving high date rate. However, given the high hardware cost and excessive power consumption of massive MIMO systems, as a remedy, intelligent metasurfaces have been designed for efficient holographic MIMO (HMIMO) systems. In this paper, we propose a HMIMO architecture based on stacked intelligent metasurfaces (SIM) for the uplink of cell-free systems, where the SIM is employed at the access points (APs) for improving the spectral- and energy-efficiency. Specifically, we conceive distributed beamforming for SIM-assisted cell-free networks, where both the SIM coefficients and the local receiver combiner vectors of each AP are optimized based on the local channel state information (CSI) for the local detection of each user equipment (UE) information. Afterward, the central processing unit (CPU) fuses the local detections gleaned from all APs to detect the aggregate multi-user signal. Specifically, to design the SIM coefficients and the combining vectors of the APs, a low-complexity layer-by-layer iterative optimization algorithm is proposed for maximizing the equivalent gain of the channel spanning from the UEs to the APs. At the CPU, the weight vector used for combining the local detections from all APs is designed based on the minimum mean square error (MMSE) criterion, where the hardware impairments (HWIs) are also taken into consideration based on their statistics. The simulation results show that the SIM-based HMIMO outperforms the conventional single-layer HMIMO in terms of the achievable rate. We demonstrate that both the HWI of the radio frequency (RF) chains at the APs and the UEs limit the achievable rate in the high signal-to-noise-ratio (SNR) region.

We propose a hybrid beamforming architecture for near-field reconfigurable holographic surfaces (RHS) harnessed in cell-free networks. Specifically, the holographic beamformer of each base station (BS) is designed for maximizing the channel gain based on the local channel state information (CSI). By contrast, the digital beamformer at the central processing unit is designed based on the minimum mean squared error criterion. Furthermore, the near-field spectral efficiency of the RHS in cell-free networks is derived theoretically by harnessing the popular stochastic geometry approach. We consider both the phase shift error (PSE) at the RHS elements and the hardware impairment (HWI) at the radio frequency (RF) chains of the transceivers. Furthermore, we theoretically derive the asymptotic capacity bound, when considering an infinite physical size for the RHS in the near-field channel model. The theoretical analysis and simulation results show that the PSE at the RHS elements and the HWI at the RF chains of transceivers limit the spectral efficiency in the high signal-to-noise ratio region. Moreover, we show that the PSE at the RHS elements and the HWI at the RF chains of BSs can be compensated by increasing the number of BSs. Finally, we also demonstrate that the ergodic spectral efficiency based on the near-field channel model is higher than that based on the far-field channel model assumption.

Harnessing the abundant availability of spectral resources at millimeter wave (mmWave) frequencies is an attractive solution to meet the escalating data rate demands. Additionally, it has been shown that full-duplex (FD) communication has the potential of doubling the bandwidth efficiency. However, the presence of significant residual self-interference (SI), which is especially more pronounced at mmWave frequencies because of the non-linearities in the hardware components, erodes the full potential of FD in practice. Conventionally, the residual SI is canceled in the baseband using digital processing with the aid of a transmit precoder. In this work, we propose a hybrid beamforming design for FD mmWave communications, where the SI is canceled by the joint design of beamformer weights at the radio-frequency (RF) and the precoder as well as combiner in the baseband. Our proposed design preserves the dimensions of the transmit signal, while suppressing the SI. We demonstrate that our joint design is capable of reducing the SI by upto 30 dB, hence performing similarly to the interference-free FD system while being computationally efficient. Our simulation results show that the proposed design significantly outperforms eigen-beamforming.

Low Earth Orbit (LEO) satellite networks are capable of improving the global Internet service coverage. In this context, we propose a hybrid beamforming design for holographic metasurface based terrestrial users in multi-altitude LEO satellite networks. Firstly, the holographic beamformer is optimized by maximizing the downlink channel gain from the serving satellite to the terrestrial user. Then, the digital beamformer is designed by conceiving a minimum mean square error (MMSE) based detection algorithm for mitigating the interference arriving from other satellites. To dispense with excessive overhead of full channel state information (CSI) acquisition of all satellites, we propose a low-complexity MMSE beamforming algorithm that only relies on the distribution of the LEO satellite constellation harnessing stochastic geometry, which can achieve comparable throughput to that of the algorithm based on the full CSI in the case of a dense LEO satellite deployment. Furthermore, it outperforms the maximum ratio combining (MRC) algorithm, thanks to its inter-satellite interference mitigation capacity. The simulation results show that our proposed holographic metasurface based hybrid beamforming architecture is capable of outperforming the state-of-the-art antenna array architecture in terms of its throughput, given the same physical size of the transceivers. Moreover, we demonstrate that the beamforming performance attained can be substantially improved by taking into account the mutual coupling effect, imposed by the dense placement of the holographic metasurface elements.