Most 2D materials are unstable under ambient conditions. Assembly of van der Waals heterostructures in the inert atmosphere of the glove box with ex situ lithography partially solves the problem of device fabrication out of unstable materials. In our paper, we demonstrate an approach to the next-generation inert-atmosphere (nitrogen, <20 ppm oxygen content) fabrication setup, including optical contact mask lithography with a 2 m resolution, metal evaporation, lift-off and placement of the sample to the cryostat for electric measurements in the same inert atmosphere environment. We consider basic construction principles, budget considerations, and showcase the fabrication and subsequent degradation of black-phosphorous-based structures within weeks. The proposed solutions are surprisingly compact and inexpensive, making them feasible for implementation in numerous 2D materials laboratories.
1 April 2024 in Journal of the Optical Society of America B
Standard optical pump-probe methods analyze a system’s temporal response to a laser pulse within sub-femtoseconds to several nanoseconds, constrained by the optical delay line’s length. While resistance is a sensitive detector in various fields, its measurements are typically slow (>µs) due to stabilization requirements. We suggest here a time-resolved pump-probe technique that combines an optical pump pulse and a rectangular electrical probe pulse through the sample, measuring transmission in a 50 ohm matched circuit with a digital oscilloscope. This allows electrically driven delays from nanoseconds to seconds. Demonstrations include studying heat-induced changes in a thin amorphous VOx film and carrier relaxation in a CdS photoresistor, showcasing potential applications in heat transfer, biochemical reactions, and gradual electronic transformations.
Standard optical pump-probe methods analyze a system's temporal response to a laser pulse within sub-femtoseconds to several nanoseconds, constrained by the optical delay line's length. While resistance is a sensitive detector in various fields, its measurements are typically slow (>microseconds) due to stabilization requirements. We suggest here a time-resolved pump-probe technique which combines an optical pump pulse and a rectangular electrical probe pulse through the sample, measuring transmission in a 50 Ohm matched circuit with a digital oscilloscope. This allows electrically-driven delays from nanoseconds to seconds. Demonstrations include studying heat-induced changes in a thin amorphous VO$_x$ film and carrier relaxation in a CdS photoresistor, showcasing potential applications in heat transfer, biochemical reactions, and gradual electronic transformations.
Solar magnetic tornadoes are dynamic, spiral-shaped plasma structures characterized by helical magnetic fields and rotating plasma flows in the solar atmosphere. They play a significant role in the transport of energy and mass within the solar environment. Identifying and analyzing solar magnetic tornadoes is challenging due to their transient nature and complex morphology and the large volume of associated observational data. We propose two automated methods for detecting these magnetoplasma structures using modern deep learning techniques. Our models search for twisted prominences in the solar corona visible at the solar limb. Our approach involves analyzing the Solar Dynamics Observatory Atmospheric Imaging Assembly 171 Å images using convolutional and recurrent neural networks. By applying established techniques, the methods proposed can detect previously unknown magnetic tornadoes alongside those documented in the literature. The models are trained on 10,294 instances, which corresponds to detection of ∼100 tornadoes with high precision and recall. Identification of 1,476,885 new instances is performed. The resulting database allows for the first comparative analysis of magnetic tornadoes’ spatial distributions across solar cycle phases. We find that tornadoes can serve as tracers of environments prone to reconnection. During solar minimum, these structures occur at the boundaries of coronal holes with strong current sheets and at the edges of polar conic current sheets. During solar maximum, they appear at the footpoints of magnetic loops and are associated with polarity inversion lines.