Dry wear experiments provide an insight detail on how severely contacting surfaces change under unlubricated sliding condition. The theory of dry sliding wear is used for understanding mixed-lubrication regime in which asperity interactions play a significant role in controlling of the friction coefficient (f). The purpose of this work is to study the tribological behavior of AISI 304 steel in contact with AISI 52100 steel during wear. Both materials are used in rolling element bearings commanly. Experiments are carried out using a pin-on-disc tribometer under dry friction condition. The areal (three dimensional, 3D) topography parameters are measured using a 3D white light interferometer (WLI) with a 10× objective. After wear tests, wear mechanisms are analyzed utilizing scanning electron microscope (SEM). Factorial design with custom response surface design (C-RSD) is used to study the mutual effect of load and speed on response variables such as f and topography parameters. It is observed that the root mean square roughness (Sq) decreases with an increase in sliding time. Within the range of sliding time, Sq decreases with an increase in the normal load. Within the range of sliding speed and normal load, it is found that Sq, mean summit curvature (Ssc), and root mean square slope (Sdq) are positively correlated with f. Whereas, negative correlation is found between f and correlation length (Sal), mean summit radius (R), and core roughness depth (Sk).
Engineered surfaces (ground and similarly structured rough surfaces) show anisotropic characteristics and their topography parameters are direction dependent. Statistical characterization of these surfaces is still complex because of directional nature of surfaces. In this technical brief, an attempt is made to simulate anisotropic surfaces through use of topography parameters (three-dimensional (3D) surface parameters). First, 3D anisotropic random Gaussian rough surface is generated numerically with fast Fourier transform (FFT). Numerically generated anisotropic random Gaussian rough surface shows statistical properties (texture direction, texture ratio) similar to ground and similarly directional anisotropic rough surfaces. For numerically generated anisotropic Gaussian rough surface, important 3D roughness parameters are determined. Sayles and Thomas' (1976, “Thermal Conductance of Rough Elastic Contact,” Appl. Energy, 2(4), pp. 249–267.) theoretical model for directional anisotropic rough surface is adopted here for calculating the summit parameters, i.e., equivalent bandwidth parameter, mean summit curvature, skewness of summit height, standard deviation of summit height, and equivalent spectral moments. This work demonstrates the variation of spectral moments in both across and parallel to the lay directions with pattern ratio (). Correlation length (βx) is fixed and correlation length (βy) is varied from 100 to 10 . Variation of summit parameters with pattern ratio is also discussed in detail. Results shows that mean summit curvature and skewness of summit heights increase with increase in pattern ratio, whereas standard deviation of summit heights and equivalent bandwidth parameter (αe) decreases with pattern ratio. A significant difference is found in “Abbott-Firestone” parameters when calculated in both perpendicular and parallel to lay directions. Effect of these parameters on wear process is discussed in brief.
Rolling contact fatigue is one of the major problems observed in gear mechanisms, which leads to high friction ultimately resulting in high energy consumption. This paper demonstrates the evolution of surface topography during running-in and subsequent rolling contact fatigue (RCF) tests under boundary or mixed-elastohydrodynamic lubrication regimes. The case-hardened discs of equal surface finish and hardness are used in the experiments, and the evolution of surface topography is investigated using a white light interferometer (WLI). Surface topography at different load stages is measured at three distinct points, on the disks and average roughness and topography parameters are reported. Semi-quantitative techniques are used to determine the asperity level parameters at different load stages. From the running-in experiment, it is found that running-in is a fast process where substantial change in surface topography occurs due to plastic deformation of most prominent asperity. From the rolling contact fatigue test (RCF) test, it is concluded that within range of the fatigue cycles, the RMS roughness (Sq) is negatively correlated with the summit radius (R), autocorrelation length (Sal) and positively correlated with summit density (Sds) and RMS slope (Sdq). Scanning Electron Microscope (SEM) analysis reveal disappearance of grinding ridges, the formation of micro pits at very small scale and pit growth in sliding direction.
A computational approach employing the boundary element method (BEM) and a deep artificial neural network (ANN) is proposed to accurately predict the real contact area (RCA) for rough surfaces. A BEM-generated dataset is utilized to develop an optimised ANN model for prediction of RCA based on surface topography parameters and applied load. The Bayesian optimized ANN model, employing a ‘logsig’ transfer function in hidden layers and having a 5-44-44-1 architecture, predicts the RCA with a mean error of ≈6 %. Shapley values are utilized for global sensitivity analysis, revealing that applied load and surface roughness are the most influential factors affecting RCA. The generalization capability of the ANN model is validated through comparisons with predictions on test data, demonstrating superior accuracy and computational efficiency over traditional numerical methods. The influence of surface topography parameters reveals that the higher surface roughness reduces RCA due to increased asperity interaction, while higher skewness promotes a larger RCA by increasing the number of contact points. Kurtosis influences RCA non-linearly, with higher kurtosis yielding lower RCA at low loads but higher RCA at high loads due to asperity distribution characteristics. The optimized deep neural network model not only predicts the real contact area with high accuracy but also significantly faster than boundary element simulations, conclusively demonstrating its potential to accelerate the design and optimization process in rough surface contact mechanics.
23 November 2022 in Surface Topography: Metrology and Properties
Water-lubricated journal bearings (WLJB) are one of the important components of the stern tube shaft. Surface topography of WLJB is an important aspect in the design of stern tube shaft, and significantly affects the lubrication characteristics of WLJB. This work aims to investigate the effect of non-Gaussian surface topography on tribological performance of water-lubricated journal bearing (WLJB) under mixed-elastohydrodynamic lubrication (mixed-EHL) regime. The non-Gaussian flow factors, and a normalized Weibull probability density function is used to tackle the non-Gaussian roughness in hydrodynamic and asperity contact models respectively. From results, it is observed that skewness ( Ssk ) significantly affects both asperity contact pressure and hydrodynamic pressure along circumferential direction of bearing. It is concluded that for skewness, Ssk = −1 to 1, lambda ratio falls between 1 to 3. The relation between altitude angle and skewness is established. The effect of bearing length to diameter (L/D) ratio on lubrication performance of WLJB is also discussed in detail.