Ice nucleation has previously been described in only a few lichens from a single location. Here we greatly extend this work and suggest that in lichens ice nucleation is a water harvesting adaption. Fifty-seven lichen samples from a variety of widespread locations were tested for ice nucleation by differential scanning calorimetry (DSC). Samples initiated freezing in the range -5.1° to -20°C and the median freezing temperature was -7.2°C. The vapour pressure difference between ice and water is significant at this temperature, and so ice grows at the expense of water (Bergeron—Findeisen process). Therefore, the ability to form ice at these temperatures provides a useful water-harvesting mechanism for lichens. Ice nucleation appears to be ubiquitous in lichens and is more likely to be associated with the mycobiont and may influence atmospheric processes.
1 September 2015 in International Journal of Pharmaceutics
In this study, we have employed Digital Light Processing (DLP) printing technology for the fabrication of solid microneedle (MN) arrays. Several arrays with various geometries, such as cones, three-sided pyramids and four-sided pyramids, with different height to aspect ratios of 1:1, 2:1 and 3:1, were printed. Post-processing curing optimizations showed that optimal mechanical properties of the photocurable resin were obtained at 40 °C and 60 min. Ex vivo skin studies showed that piercing forces, penetration depth and penetration width were affected by the MN geometry and height to aspect ratio. Cone-shaped MNs required lower applied forces to penetrate skin and showed higher penetration depth with increasing height to aspect ratio, followed by three-sided and four-sided printed arrays. Cytotoxicity studies presented 84% cell viability of human fibroblasts after 2.5 h, suggesting the very good biocompatibility of the photocurable resin. Overall, DLP demonstrated excellent printing capacity and high resolution for a variety of MN designs.