Many studies of anisotropic wetting surfaces with directional structures inspired from rice leaves, bamboo leaves, and butterfly wings have been carried out because of their unique liquid shape control and transportation. In this study, a precision mechanical cutting process, ultra-precision machining using a single crystal diamond tool, was used to fabricate a mold with microscale directional patterns of triangular cross-sectional shape for good moldability, and the patterns were duplicated on a flat thermoplastic polymer plate by compression molding for the mass production of an anisotropic wetting polymer surface. Anisotropic wetting was observed only with microscale patterns, but the sliding of water could not be achieved because of the pinning effect of the micro-structure. Therefore, an additional dip coating process with 1H, 1H, 2H, 2H-perfluorodecythricholosilanes, and TiO2 nanoparticles was applied for a small sliding angle with nanoscale patterns and a low surface energy. The anisotropic superhydrophobic surface was fabricated and the surface morphology and anisotropic wetting behaviors were investigated. The suggested fabrication method can be used to mass produce an anisotropic superhydrophobic polymer surface, demonstrating the feasibility of liquid shape control and transportation.
3D imaging of a biological sample provides information about cellular and subcellular structures that are important in cell biology and related diseases. However, most 3D imaging systems, such as confocal and tomographic microscopy systems, are complex and expensive. Here, we developed a quasi-3D imaging tool that is compatible with most conventional microscopes by integrating micromirrors and microchannel structures on coverslips to provide bidirectional imaging. Microfabricated micromirrors had a precisely 45° reflection angle and optically clean reflective surfaces with high reflectance over 95%. The micromirrors were embedded on coverslips that could be assembled as a microchannel structure. We demonstrated that this simple disposable device allows a conventional microscope to perform bidirectional imaging with simple control of a focal plane. Images of microbeads and cells under bright-field and fluorescent microscopy show that the device can provide a quick analysis of 3D information, such as 3D positions and subcellular structures.