In order to improve the control performance of vehicle-mounted radar, a high precision leveling control system is designed through mechatronic-hydraulic integration technology. A leveling method combining angle error leveling method and height error leveling method is designed, and inclinometers are set in the front and rear of the vehicle body platform to effectively eliminate the virtual outrigger phenomenon in the leveling process. The mathematical model of hydraulic system is developed, the fuzzy PID control method is introduced, and the four-point support hydraulic leveling control system is developed by using STM32 microcontroller as the control core. The field test proves that the control system has good control performance, high leveling accuracy, short time, and meets the control requirements of the radar vehicle.
8 March 2023 in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
The compressor discharge pressure of a polyethylene plant in Yanshan Petrochemical Company exceeds 170 MPa, and the gas pulsation in some pipe sections is large, which leads to strong vibration of pipeline elements. The acoustic modeling and analysis of gas pulsation characteristics were carried out around the hyper compressor pipeline system of the polyethylene device. The non-invasive strain–pressure method was used to indirectly measure the pressure pulsation data in the high-pressure pipeline, and the test results were in good agreement with the simulations. On this basis, based on the acoustic analysis, the treatment measures to effectively suppress the gas pulsation in the high-pressure pipeline were further proposed.
4 October 2017 in Engineering Applications of Computational Fluid Mechanics
In order to realize the numerical analysis of aerodynamic damping for the centrifugal impellers, a numerical code integrating the flow-structure data transfer, grid deformation and flow simulation under the moving grid system is first developed. To decrease the huge consumptions of CPU time and memory space, the compactly supported radial basis function is adopted to carry out the data transfer and grid deformation, and the alternating digital tree technique is utilized to calculate the wall distances. By the test cases of an oscillating cascade and a centrifugal impeller, the correctness of the code for the flow simulations with moving boundaries and the flow fields in centrifugal impellers is validated. Then taking a centrifugal impeller as the research object, the calculations of aerodynamic damping characteristics were carried out. The results show that, the modal aerodynamic damping ratio has no relationship with the vibrating amplitude under small vibrations. For the disk-dominant vibration mode, the modal aerodynamic damping ratio decreases as the operating point shifts toward the stall point. The aerodynamic damping caused by the backward traveling wave vibration is larger than that by the forward traveling wave vibration.
Accordingly, the mass unbalance of the rotors is usually the major cause of excessive vibration. The information extracted at the fundamental frequency is often employed to fix the unbalance issue. However, other rotor faults like rotor bending and bearing-failure effect also generate additional components to the characteristics. Thus, it is necessary to isolate the corresponding features and obtain the intrinsic causes of the multiple failures. In this paper, a productive hybrid method is successfully developed to deal with the root mass unbalance problem with additional force interference by integrating the superiority of different methods, including Ensemble Empirical Mode Decomposition (EEMD) and Nonnegative Matrix Factorization (NMF), where EEMD is used to obtain sensitive IMFs and NMF is employed to acquire the inherent source signal, respectively. Meanwhile, a root dynamic balancing and implemental framework is also developed to accomplish the task of vibration reduction. For verification, a serial of simulations and experimental investigations have been analysed to demonstrate the preferable potentialities of the proposed method. In particular, a standard Bently Nevada rotor rig with a specifically designed device was employed to simulate appended faults by adjusting the additional forces during the experimental steps. The analysis results show that the proposed method can isolate and extract the unbalance faults from the raw vibration signals and achieve accurate correction balancers, where a nearly identical correction angle has been achieved, which indicates that the optimal installation position has been successfully figured out.