In this work, the effects of plastic deformation on the indentation behaviors of commercial pure titanium alloy were investigated. Titanium experienced various kinds of deformation by cold rolling processes, and the indentation behaviors were measured using microindentation. The results showed the most deformed sample experienced the largest indentation resistance and had the highest dislocation density and the indentation size influenced the indentation behavior of the CP-Ti. The effect of strain on Vickers hardness demonstrated the dominant role of the dislocation motion in the indentation deformation of CP-Ti alloy. The dependence of the indentation hardness on both the maximum indentation load and the indentation residual depth suggested there exists size effect in the indentation. The effect of the plastic strain on the energy ratio suggested the energy ratio is related to the microstructure in materials. Additionally, the linear relationship between the energy ratio on the indentation depth ratio was obtained for hcp-structured Titanium alloys.

Effects of plastic deformation on the indentation feature of hot-rolled commercial pure titanium alloy were detected using microindentation. It was found that the most deformed sample experienced the largest indentation resistance and had the maximum dislocation density and the indentation size influenced the CP-Ti indentation feature. The Vicker hardness and energy dissipated demonstrated the significant influence of the dislocation motion and size effects on the indentation in the indentation deformation. The linear relation of the energy ratio which is related to the microstructures and the indentation depth ratio was obtained for hcp materials Titanium alloys.