Fracture–cavity karst carbonate reservoirs have multiple storage space with irregular geometry and various scales, and this caused strong heterogeneity and complex flow characteristics. Accurately calculating the well-controlled dynamic reserves of this kind reservoir effectively is the basis to optimize oil field development plan and making the transformation measures of production well. In order to solve the problem that conventional well-controlled dynamic hydrocarbon reserves calculation method is not suitable for such type reservoirs, we applied a method based on production data analysis. Classification standard of oil well types is established based on the fracture–cavity reservoirs geological static and production dynamic characteristics. Conceptual characteristics of geological model and fluid flow pattern for different types of production wells are assumed. Calculation workflow for well-controlled reserves of fracture–cavity reservoir is established. In the process, some technical key points are proposed to improve accuracy of curve fitting, such as converting the bottom hole pressure from wellhead pressure, correcting the well control range and converting the PVT parameters at the pseudo-steady state. We verified correctness of this method by comparing the calculated results with numerical simulation results of actual production well. This method is well used to Tahe Oil field of Tarim Basin in China. The result shows that the well-controlled reserves quantitative calculation results through this method are in conformity with oil field actual understanding, and the remaining dynamic reserves mainly exist in the drainage area of the wells that drilled different reservoir bodies with good connectivity, especially at the top of large karst caves, and that is the target of further adjusting.
Carbonate rock oilfields account for two-thirds of proven marine carbonate oilfield reserves, which are the primary way to increase future oil and gas energy reserves. Cave collapses occur during the process of oil reservoir development, seriously affecting oil production. In order to reveal the collapse failure mechanism of carbonate karst caves and predict whether the fracture cave type oil reservoir will collapse before drilling, a binary depth reduction method for determining the critical collapse depth of karst caves is proposed based on the Tahe fracture cave type oil reservoir. The sensitivity of karst cave collapses to multiple factors is analyzed, and a prediction formula for the critical collapse depth of karst caves with changes in the deformation modulus, the internal friction angle, and the cohesion is established through multiple regression analysis. By calculating and analyzing the numerical values of a large number of operating conditions under different mechanical parameters, the failure process, failure mode, and the change law of collapse depth during the Tahe oilfield destruction process were obtained. We used the established formula for predicting the collapse depth of karst caves to predict and analyze the actual distribution of karst caves in the Tahe oilfield. The calculation and analysis results showed that in the karst cave failure mode characterized by vertical shear failure, the cohesive force is the most sensitive factor affecting cave collapse, followed by the internal friction angle. The deformation modulus is hardly sensitive to the influence of the karst collapse. Through the geomechanical model test, the result verified the accuracy and reliability of the calculation results. The research results will provide necessary theoretical support for the large-scale safe extraction of deep petroleum resources, increase oil production in China, and have important theoretical significance and engineering application value.
Bedding-parallel fractures represent a crucial flow-path network in shale oil reservoirs, yet their timing of opening and driving mechanisms remain subjects of long-standing debate. This study investigates the origin and opening mechanisms of bedding-parallel fractures within the Paleogene Funing shale oil reservoir of the Huazhuang area, Subei Basin, eastern China. A combination of petrography, fluid-inclusion analysis, PVTx paleo-pressure modeling, hydrocarbon generation history modeling, and reflectance measurements was employed. The results reveal the presence of abundant oil inclusions and bitumen within the bedding-parallel veins, indicating that the initiation of fracture was essentially synchronous with the oil emplacement. The studied Funing shale, with vitrinite reflectance values of 0.85% to 1.04%, is mature, identifying it as an effective oil-prone source rock. Thermal maturity of bitumen is comparable to that of the host shale, suggesting a local oil source. Homogenization temperatures (Th) of coeval aqueous inclusions record fracture opening temperatures of approximately 100–150 °C, consistent with oil-window conditions. By integrating Th data with burial history modeling, the timing of fracture formation and coeval oil injection is constrained to the peak period of local hydrocarbon generation, rather than the Oligocene Sanduo tectonic event. This indicates that fracture opening was primarily associated with hydrocarbon generation rather than tectonic compression. Petroleum-inclusion thermodynamic modeling demonstrates that the bedding-parallel fracture opening occurred under moderate to strong overpressure conditions, with calculated paleo-pressure coefficients of ~1.35–2.36. This finding provides direct paleo-pressure evidence supporting the mechanism of bedding-parallel fracture opening driven by fluid overpressure created during oil generation. These oil-bearing, overpressured fluids facilitated the initial opening and subsequent propagation of fractures along the bedding planes of shales. Concurrently, the precipitation of the calcite veins may have been triggered by pressure drop associated with the expulsion of some coexisting aqueous fluids. This study provides evidence addressing the debated mechanisms of bedding-parallel fracture opening in organic-rich shales, highlighting the critical role of oil generation-induced overpressure.
Fractured-vuggy oil reservoirs, with the decrease of formation pressure during the exploitation process, lead to the collapse of caverns or the closure of sizeable fractured oil channels, which seriously affects oil well production and the recovery rate of oil reservoirs. True three-dimensional geomechanical model tests were carried out to avoid the impact of cave collapse and fracture closure on oil well production. Taking the Tahe Oilfield in Xinjiang area of China as the engineering background, we researched the collapse failure mechanism of the karstic caves in fractured-cavity oil reservoirs and the evolution of fracture closure through a true three-dimensional geomechanical model test and the numerical simulation software RFPA. The collapse failure modes of caverns with and without prefabricated cracks were revealed, along with the displacement and stress changes during cave collapse and the mechanism of cave collapse failure. Our study revealed the mechanism of the interaction between cracks and the cave. The research results show that prefabricated cracks reduce the roof of the cave’s bearing capacity, making the karst cave collapse with incomplete cracks. The impact of the collapse is much smaller than the cavern without prefabricated cracks. The crack closure extends from the near end to the far end. The research results will provide necessary theoretical support for the large-scale safe extraction of deep petroleum resources, increase oil production in China, and have important theoretical significance and engineering application value.
Accurate in-situ stress characterization is essential for hydraulic fracturing design in shale reservoirs, yet 3D geomechanical model calibration still relies on iterative trial-and-error procedures that are computationally intensive and physically opaque. Sensitivity analysis, though widely used to evaluate the influence of elastic parameters, is typically treated as descriptive rather than predictive. This work proposes a sensitivity-driven inversion framework for efficient calibration of horizontal stresses in 3D geomechanical models. Controlled perturbation simulations on a baseline model quantify the responses of maximum and minimum horizontal stresses ($S_H$ and $S_h$) to variations in Young's modulus and Poisson's ratio across stratigraphic units. These responses form a sensitivity matrix establishing a first-order relationship between parameter perturbations and stress variations. A dual-objective inversion scheme then simultaneously constrains $S_H$ and $S_h$, enabling direct single-step parameter estimation and reducing reliance on iterative calibration. Application to a shale reservoir shows good agreement with reference stress profiles, with interval-averaged deviations reduced below 1%. Moreover, sensitivity relationships from a reference block serve as a first-order approximation for calibrating geologically similar neighboring blocks, demonstrating cross-block transfer potential. The framework offers an efficient, physically interpretable stress calibration approach and provides a practical alternative to conventional empirical methods.
Shale oil is primarily hosted within nanopores, where its flow behavior exhibits significant deviations from classical Darcy flow. The combined influences of nanoscale confinement and interfacial interactions represent key scientific challenges that hinder efficient shale oil recovery. The results show that under 25 °C and 1 MPa, the displacement distances of shale oil within 12 s in 100, 200, and 300 nm channels were 2.88, 5.67, and 11.01 mm, respectively. As pore size decreases, flow capacity drops sharply, and the displacement–time relationship evolves from quasi-linear to strongly nonlinear, indicating pronounced nanoscale non-Darcy behavior. By incorporating an equivalent resistance coefficient into the plate-channel flow model, the experimental data were accurately fitted, enabling quantitative evaluation of the additional flow resistance induced by nanoconfinement and interfacial adsorption. The equivalent resistance coefficient increases markedly with decreasing pore size but decreases progressively with increasing temperature and driving pressure. Increasing temperature and pressure partially mitigates nanoconfinement effects. In 200 nm channels, the equivalent resistance coefficient decreases from 1.87 to 1.20 as temperature rises from 25 to 80 °C, while in 100 nm channels it decreases from 2.43 to 1.65 as driving pressure increases from 1 to 6 MPa. Nevertheless, even under high-temperature and high-pressure conditions, shale-oil flow does not fully recover to ideal Darcy behavior. This work establishes a nanofluidic-based prediction and evaluation framework for shale oil flow, offering theoretical guidance and experimental reference for unconventional reservoir development and the optimization of enhanced oil recovery strategies.