This paper presents the design and testing of a one-axis piezoelectric accelerometer made from cellulose paper and piezoelectric zinc oxide nanowires (ZnO NWs) hydrothermally grown on paper. The accelerometer adopts a cantilever-based configuration with two parallel cantilever beams attached with a paper proof mass. A piece of U-shaped, ZnO-NW-coated paper is attached on top of the parallel beams, serving as the strain sensing element for acceleration measurement. The electric charges produced from the ZnO-NW-coated paper are converted into a voltage output using a custom-made charge amplifier circuit. The device fabrication only involves cutting of paper and hydrothermal growth of ZnO NWs, and does not require the access to expensive and sophisticated equipment. The performance of the devices with different weight growth percentages of the ZnO NWs was characterized.
The mechanical characterization and simulation of human aortas is very relevant to prevent diseases and design aortic grafts for aorta repair. Eleven donors of both genders, with an average age of 51.5 ± 17.3 years were selected for the study. A custom mock circulatory loop (MCL) was built to study the nonlinear dynamics of human descending thoracic aortas. Once the preparation was
The experimental response of beams with nonlinear boundary conditions was interpreted using a bilinear hysteresis model. Nonlinear experimental responses of two configurations of beams made out of Zirconium alloy tubes were considered in this paper: one configuration with a single beam and the second configuration with a cluster of beams (stacked in a 3x3 matrix formulation).
Nuclear fuel bundles in PWR reactors present vibrations due to coolant flow, which may result in fretting at the interface between the fuel rods and the retaining elements, named *spacer grids*. Seismic excitation may also occur during accidental events, such as earthquakes. In this perspective, forced vibration experiments were performed on a reduced-scale nuclear fuel bundle