Perovskite halides are the most promising current candidates for the construction of solar cells and other photovoltaic devices. This is the first theoretical approach to explore the effects of Mn-doping on the optoelectronic performance of the lead-free halide CsGeBr3 and the lead-bearing halide CsPbBr3. We have performed the first-principles calculations to investigate the structural, mechanical, electronic, and optical properties of pure and Mn-doped CsGeBr3 and CsPbBr3 perovskite halides in detail. The lattice constants of Mn-doped halides were slightly reduced compared to their pure phases, which is common in materials after doping. The structural stability of both undoped and doped halides was confirmed by their formation enthalpy. Analysis of the mechanical properties revealed the mechanical stability of both undoped and Mn-doped CsGeBr3 and CsPbBr3. The lower values of the bulk modulus suggested potential optoelectronic applications for the halides being studied. Remarkably, the partial substitution of Ge with Mn narrows the bandgap of both Pb-free and Pb halides, enhancing the electron transfer from the valence band to the conduction band, which increased the absorption and conductivity, essential for superior optoelectronic device applications. The combined analysis of mechanical, electronic, and optical properties indicated that the Mn-doped halides, CsGeBr3 and CsPbBr3, are more suitable for the solar cells and optoelectronic applications than undoped CsGeBr3 and CsPbBr3.
Recently, lead halide perovskites have gained considerable attention by dint of their predominant physiochemical features and potential use in various applications with an improved power conversion efficiency. Despite the incredible technological and research breakthroughs in this field, most of those compounds present an obstacle to future commercialization due to their instability and extreme poisonousness. Because of this, it is preferable to replace lead with alternative stable elements to produce eco-friendly perovskites with equivalent optoelectronic qualities similar to lead-based perovskites. However, Pb-free perovskite-based devices have relatively low power conversion efficiency. Pressure might be considered an effective way for modifying the physical characteristics of these materials to enhance their performance and reveal structure-property correlations. The present study has been done to investigate the structural, electronic, optical, elastic, mechanical, and thermodynamic properties of nontoxic perovskite CsMgI3 under hydrostatic pressure by using density functional theory (DFT). At ambient pressure, the present findings are in excellent agreement with the available experimental data. Pressure causes the Mg-I and Cs-I bonds to shorten and become stronger. The absorption coefficient in the visible and ultraviolet (UV) zones grows up with the increase in pressure. Additionally, we have observed low reflectivity, a high-intensity conductivity peak, and a dielectric constant in the visible region of the electromagnetic spectrum. As pressure rises, the band gap keeps narrowing, facilitating an electron from the valence band to get excited easily at the conduction band. Furthermore, we analyze the mechanical, elastic, and thermodynamic properties under pressure, which suggests that this compound exhibit ductile behavior. The shrunk band gap and improved physical properties of CsMgI3 under hydrostatic pressure suggest that this material may be used in solar cells (for photovoltaic applications) and optoelectronic devices more frequently than at ambient pressure. In addition, this paper emphasizes the feasibility of hydrostatic pressure in the systematic modification of the optoelectronic and mechanical characteristics of lead-free halide perovskites.
Recently synthesized industrially significant perovskites ( are subjected to a density functional theory (DFT) investigation utilizing the CASTEP code. This study explores various physical features, including structural, optical, thermodynamic, elastic, mechanical, and electronic properties. There is a strong correlation between the optimized structure parameters and the existing experimental data, which demonstrates the reliability of our DFT-based computations. The band structure and density of states (TDOS and PDOS) analysis revealed that all the studied perovskites are direct band gap semiconductors, and has the smallest band gap (2.092 eV). We also discussed the mechanical and cell stability using the Born stability criterion and formation energy, respectively. The mechanical and dynamic stability of each phase is confirmed by the analysis of the elastic constants. According to the computed values of Pugh's and Poisson's ratios as well as Cauchy's pressure, all of the studied compounds are ductile in nature. The study of density of states, total charge density, and Mulliken atomic populations reveal that all the compounds have complex bonding with both ionic and covalent properties. Finally, utilizing the elastic constant data, the Debye temperatures of , , and have been determined as 82.90 K, 100.00 K, and 80.70 K, respectively. The analysis of thermodynamics (relatively low values of both and ) as well as optical properties indicate that all the investigated materials have the potential to serve as thermal barrier coating (TBC) materials.
This research employs first-principles simulations to systematically study the structural, elastic, electronic mechanical, and optical characteristics of lead free halide Rb2AgBiX6 (X = Br, Cl) perovskites under pressure. The computed structural parameters are in good agreement with previous experimental and theoretical results. The obtained elastic constants met the Born stability requirements, showing that our materials are mechanically stable at variable hydrostatic pressures, as supported by the computed negative formation energy values. The covalent bond exhibits metallic characteristics, and induced hydrostatic pressure leads to a decrease in bond lengths. Mechanical analysis demonstrates that the studied materials are ductile and mechanically stable, with enhanced ductility under pressure. The materials are small band gap (1.30 eV, 1.801 eV for Rb2AgBiX6 (X = Br, Cl, respectively) semiconductors at ambient pressure with superior optoelectronic performance. Under hydrostatic pressure, Rb2AgBiX6 (X = Br, Cl) experiences a reduction in its band gap (0.545 eV, 1.305 eV for Rb2AgBiX6 (X = Br, Cl, respectively), accompanied by improved physical characteristics. This suggests the potential for increased utilization of this material in optoelectronic devices and solar cells compared to ambient pressure conditions.