The High Precision Magnetometer (HPM) on board the China Seismo-Electromagnetic Satellite (CSES) allows highly accurate measurement of the geomagnetic field; it includes FGM (Fluxgate Magnetometer) and CDSM (Coupled Dark State Magnetometer) probes. This article introduces the main processing method, algorithm, and processing procedure of the HPM data. First, the FGM and CDSM probes are calibrated according to ground sensor data. Then the FGM linear parameters can be corrected in orbit, by applying the absolute vector magnetic field correction algorithm from CDSM data. At the same time, the magnetic interference of the satellite is eliminated according to ground-satellite magnetic test results. Finally, according to the characteristics of the magnetic field direction in the low latitude region, the transformation matrix between FGM probe and star sensor is calibrated in orbit to determine the correct direction of the magnetic field. Comparing the magnetic field data of CSES and SWARM satellites in five continuous geomagnetic quiet days, the difference in measurements of the vector magnetic field is about 10 nT, which is within the uncertainty interval of geomagnetic disturbance.

The High Precision Magnetometer (HPM) is one of the main payloads onboard the China Seismo-Electromagnetic Satellite (CSES). The HPM consists of two Fluxgate Magnetometers (FGM) and the Coupled Dark State Magnetometer (CDSM), and measures the magnetic field from DC to 15 Hz. The FGMs measure the vector components of the magnetic field; while the CDSM detects the magnitude of the magnetic field with higher accuracy, which can be used to calibrate the linear parameters of the FGM. In this paper, brief descriptions of measurement principles and performances of the HPM, ground, and in-orbit calibration results of the FGMs are presented, including the thermal drift and magnetic interferences from the satellite. The HPM in-orbit vector data calibration includes two steps: sensor non-linearity corrections based on on-ground calibration and fluxgate linear parameter calibration based on the CDSM measurements. The calibration results show a reasonably good stability of the linear parameters over time. The difference between the field magnitude calculated from the calibrated FGM components and the magnitude directly measured by the CDSM is just 0.5 nT (1σ) when the linear parameters are fitted separately for the day- and the night-side. Satellite disturbances have been analyzed including soft and hard remanence as well as magnetization of the magnetic torquer, radiation from the Tri-Band Beacon, and interferences from the rotation of the solar wing. A comparison shows consistency between the HPM and SWARM magnetic field data. Observation examples are introduced in the paper, which show that HPM data can be used to survey the global geomagnetic field and monitor the magnetic field disturbances in the ionosphere.

Processes and threats related to natural hazards play an important role in the evolution of the Earth and in human history. The purpose of this study is to investigate magnetic field variations measured at low Earth orbit (LEO) altitudes possibly associated with earthquakes, volcanic eruptions, and artificial outbursts. We focus on two missions with well equipped magnetometer packages, the China Seismo-Electromagnetic Satellite (CSES) and ESA’s three spacecraft Swarm fleet. After a natural hazards survey in the context of this satellites, and consideration of external magnetospheric and solar influences, together with spacecraft interferences, wavelet analysed spatio-temporal patterns in ionospheric magnetic field variations related to atmospheric waves are examined in detail. We provide assessment of the links between specific lithospheric or near surface sources and ionospheric magnetic field measurements. For some of the diverse events the achieved statistical results show a change in the pattern between pre- and post-event periods, we show there is an increase in the fluctuations for the higher frequency (smaller scales) components. Our results are relevant to studies which establish a link between space based magnetic field measurements and natural hazards.

The CSES high precision magnetometer (HPM), consisting of two fluxgate magnetometers (FGM) and one coupled dark state magnetometer (CDSM), has worked successfully for more than 5 years providing continuous magnetic field measurements since the launch of the CSES in February 2018. After rechecking almost every year’s data, it has become possible to make an improvement to the in-flight intrinsic calibration (to estimate offsets, scale values and non-orthogonality) and alignment (to estimate three Euler angles for the rotation between the orthogonalized sensor coordinates and the coordinate system of the star tracker) of the FGM. The following efforts have been made to achieve this goal: For the sensor calibration, FGM sensor temperature corrections on offsets and scale values have been taken into account to remove seasonal effects. Based on these results, Euler angles have been estimated along with global geomagnetic field modeling to improve the alignment of the FGM sensor. With this, a latitudinal effect in the east component of the originally calibrated data could be reduced. Furthermore, it has become possible to prolong the updating period of all calibration parameters from daily to 10 days, without the separation of dayside and nightside data. The new algorithms optimize routine HPM data processing efficiency and data quality.