Thermal and electrical conductivity of unsaturated polyester resin with copper filler composite material are investigated both theoretically and experimentally. In the experiments, polyester matrix is combined with dendrite-shape copper to determine the effects of both filler size and content on thermal and electrical conductivity, respectively. It is observed that the increase in the concentration causes the thermal and electrical conductivity of composite mixture to grow up. It has also been observed that the both thermal and electrical conductivity increase with increasing filler particle size.
26 May 2017 in Arabian Journal for Science and Engineering
In this study, structural design and analysis of a type-3 composite over wrapped pressure vessel used in a military satellite propulsion system is presented. The aim is to design a composite tank lighter than all metal fuel tanks having the same volume. Moreover, necessary design stages have been revealed for similar composite over wrapped pressure vessels. ANSYS® is used to perform the stress-strain analysis of both metal and composite parts, to determine the optimum winding angle, tank Autofrettage and fracture characteristic for the metal liner considering the crack morphology. Tsai-Hill, Tsai-Wu and Hashin theories have been implemented to investigate the various failure modes of the composite vessel. Location, size and orientation angle of semi-elliptical surface crack has a pronounced effect on fracture characteristic of the liner. In fracture investigation J-integral method is used. It is foreseen that even in the most critical crack, the crack will not propagate and there will be no burst in the tank for proposed loading conditions. Numerical results are good agreement with the experimental results.
Investigating the mechanism of Built-Up Edge (BUE) formation, which increases tool wear and leads to a decrease in surface quality and tool life, is a critical aspect in engineering applications. A detailed examination of this mechanism holds great importance for extending tool life, reducing workpiece surface roughness, and ultimately lowering tool and production costs. Currently, theoretical, experimental, and numerical studies on this formation mechanism are still ongoing. In this research, the effects of cutting speed on the BUE formation mechanism and the resulting chip morphology were examined in detail, while keeping the cutting depth and feed rate constant. Experimental studies have shown that cutting speed directly influences the formation of BUE and the resulting chip morphology. The extent of this effect, along with details related to chip morphology and BUE formation, was analyzed by comparing scanning electron microscope images. Additionally, the relationship between cutting force values read from the machine monitor during cutting and cutting speed was also investigated. This research highlights the potential to achieve a longer tool life, high-quality workpiece surfaces, and cost-effective production through the optimization of parameters in the workpiece machining process
19 June 2016 in International Journal of Aerospace Engineering