For some embedded engine arrangements, the nature of the inlet distortion is influenced by the boundary layer characteristics at the inlet plane of the intake. This research presents the first quan...
24 May 2022 in Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
Convoluted aero-engine intakes are often required to enable closer integration between engine and airframe. Although the majority of previous research focused on the distortion of S-duct intakes with undistorted inlet conditions, there is a need to investigate the impact of more challenging inlet conditions at which the intake duct is expected to operate. The impact of inlet vortices and total pressure profiles on the inherent unsteady flow distortion of an S-duct intake was assessed with stereo particle image velocimetry. Inlet vortices disrupted the characteristic flow switching mode but had a modest impact on the peak levels and unsteady fluctuations. Non-uniform inlet total pressure profiles increased the peak swirl intensity and its unsteadiness. The frequency of swirl angle fluctuations was sensitive to the azimuthal orientation of the non-uniform total pressure distribution. The modelling of peak distortion with the extreme value theory revealed that although for some inlet configurations the measured peak swirl intensity was similar, the growth rate of the peak values beyond the experimental observations was substantially different and it was related with the measured flow unsteadiness. This highlights the need of unsteady swirl distortion measurements and the use of statistical models to assess the time-invariant peak distortion levels. Overall, the work shows it is vital to include the effect of the inlet flow conditions as it substantially alters the characteristics of the complex intake flow distortion.
Closer integration between the airframe and the propulsion system is expected for future aircraft to reduce fuel consumption, emissions, weight, and drag. The use of embedded or partially embedded ...
The use of multiple perspective views is a possible pathway towards the combined measurement of multiple time-resolved flow properties by filtered Rayleigh scattering (FRS). In this study, a six view observation concept is experimentally verified on a aspirated pipe flow. The concept was introduced in our previous work, and it has the ability to simultaneously measure high-accuracy time-averaged and time-resolved three-component velocity, pressure and temperature fields. To simulate time-resolution, multi-view FRS data at a single optimised excitation frequency are selected and processed for multiple flow properties. Time-averaged and quasi-time-resolved FRS results show very good agreement with differential pressure probe measurements and analytical temperature calculations and lie within $$\pm 2$$ m/s of complementary laser Doppler anemometry (LDA) velocity measurements for all operating points. The introduction of a multistage fitting procedure for the time-resolved analysis leads to a significant improvement of the precision by factors of 4 and 3 for temperature and axial velocity and 18 for pressure. Moreover, both processing methods show their capacity to resolve flow structures in a swirling flow configuration. It is demonstrated that the developed multi-view concept can be used to determine multiple flow variables from a single-frequency measurement, opening the path towards time-resolved multi-parameter measurements by FRS.
11 March 2024 in Journal of Engineering for Gas Turbines and Power
Unsteady flow distortion is of interest for the development of air-breathing propulsion systems. Stochastic fluctuations can generate incompatibilities between intakes and aero-engines. Observing the extreme flow distortion events during experimental testing is not guaranteed and statistical models such as extreme value theory (EVT) can be used to estimate the occurrence and magnitude of the fluctuations. However, the current industry standard does not provide guidance on how to apply these methods to obtain useful predictions. This work proposes a systematic process to assess the required number of observations for obtaining statistical convergence of the EVT predictions. This is achieved through shuffling of the data samples and relies on the availability of a sufficiently large initial dataset. This can be adopted by gas turbine engineers to evaluate the data recording requirements and to potentially reduce costs associated with experimental programs.