Radio frequency (RF) fingerprinting techniques have been used as an extra security layer for wireless devices. Unique fingerprints are used to identify wireless devices in order to avoid spoofing or impersonating attacks. These unique features can be extracted from imperfections of analog components during the manufacturing. This paper presents a general review of recent progress on RF fingerprinting techniques. Several studies are investigated for RF fingerprinting using different parts of a signal. The majority of these studies have been focused on the transient part of the signal. For this purpose, the transient signal must be extracted precisely. A number of common techniques of transient extraction are theoretically analyzed in this review. Then, some other approaches using the modulated part of the signal are also discussed. For all these approaches, the applied methodologies, the classification algorithms and a taxonomy of features are described. A comprehensive overview of the methods in RF fingerprinting is presented to demonstrate the state-of-the-art works.
Traditionally, the frequency spectrum is licensed to users by government agencies in a fixed manner where the licensee has exclusive right to access the allocated band. However, with increasing demand for the spectrum and scarcity of vacant bands, a spectrum policy reform seems inevitable. Meanwhile, recent measurements suggest the possibility of sharing spectrum among different parties subject to interference-protection constraints. In order to enable access to an unused licensed spectrum, a secondary user has to monitor licensed bands and opportunistically transmit whenever no primary signal is detected. Spectrum-sharing between a primary licensee and a group of secondary users has been studied. The structure of an asymptotically optimum detector based on the measurements of all secondary users is derived and the effect of the quantisation error in such a system is evaluated. Also, it is shown that by using the proposed detector in a sequential detection structure, it is possible to shorten the decision time needed by the detector. The results show the superiority of the proposed detector to other schemes.
Several target position finding methods are proposed in various papers mainly regarding sensor networks. However, the problem of position finding in passive radar systems is somewhat different from the general case of sensor networks. Generally, in a passive radar system, there are few receivers located at short distances when compared with the it distance from the target. In this case, a problem known as geometric dilution of precision (GDP) occurs, which considerably increases the error of many proposed methods. This phenomenon can even make the position finding equations non-solvable. Regarding this fact, we have developed a least mean square error (LMSE) based method, which uses both the angle of arrival (AOA) and time difference of arrival (TDOA) measurements to estimate almost precisely the position of very distant targets in a passive radar system. A simple equation is derived here to compare the TDOA and AOA accuracies. Then, it is shown that whenever the accuracies of these two measurements are comparable, the proposed method estimates the target position more precisely than the conventional AOA-only and TDOA-only methods. It also avoids the non-convergence behaviour encountered in TDOA-only methods.
Mirzaei S., Van hamme H., Norouzi Y., ''Blind audio source counting and separation of anechoic mixtures using the multichannel complex NMF framework'', Signal processing, vol. 115, pp. 27-37, 2015.status: publishe
This paper considers the problem of constant false alarm rate (CFAR) detection of radar targets using multiple observations. In the Gaussian clutter scenario, the structure of the optimum (uniformly most powerful) CFAR detector is rather simple, but when the clutter is heavy-tailed, that is non-Gaussian distributed, the derivation of the optimal detector becomes infeasible. For this latter relevant case, a new CFAR algorithm is porposed based on goodness-of-fit (GoF) tests. The performance of the proposed detector is numerically investigated through Monte Carlo simulations assuming heavy-tailed Weibull and Lognormal distributed clutter. Numerical results shown that, in heavy-tailed clutter and also when several interfering targets exist, the proposed detector outperforms the conventional CFAR detector based on binary integration. Performance is also tested processing real sea clutter data collected by a non-coherent navigation radar.