This paper provides an overview of state-of-the-art sensing and machine learning technologies for intelligent measurement in smart and precision manufacturing. Length, angle, and force are identified as the fundamental quantities for production quality management based on process monitoring as well as geometrical metrology in optical lithography and mechanical machining. Advancements in length-based measurement technologies such as laser interferometers and optical encoders, as well as advancements regarding depth and thickness measurements, are presented. Various types of optical microscopes, such as evanescent field microscopes, structured illumination microscopes, and confocal microscopes, are also described. For angle-based measurement technologies, in addition to the conventional continuous-wave laser autocollimators, the newly developed Fabry–Pérot angle sensor and nonlinear optics angle sensor using an ultrashort pulse laser are presented. Finally, on-machine and in-process force sensing and machining learning techniques for dimensional and machining process monitoring are reviewed.
To address the difficulty of obtaining Guide to the Expression of Uncertainty in Measurement (GUM)-based measurement uncertainty for sensors employing artificial neural networks (ANNs) in the field of mechanical measurement, this paper proposes and demonstrates a GUM-based uncertainty evaluation method for a nonlinear optical angle sensor that uses a multilayer perceptron artificial neural network (MLP-ANN). The proposed sensor decodes the angular information of a target by inputting a measured second harmonic generation spectrum into a trained MLP-ANN to enable wide-range angle measurement. However, the measurement uncertainty of this method has not yet been evaluated, and such an analysis is essential to assess the accuracy and reliability of the sensor. This paper demonstrates the measurement uncertainty evaluation of the nonlinear optical angle sensor using a specifically trained MLP-ANN and thereby confirms the feasibility of the proposed GUM-based method. Mathematical derivations are provided to obtain the sensitivity coefficients required for uncertainty estimation. Notably, this derivation is one of the most challenging aspects when applying GUM to ANN-based sensors. The uncertainty of the reference instrument used to generate training labels is also considered by incorporating the effects of the ANN training. The proposed method reveals that the measurement uncertainty of the MLP-ANN estimation ranges from 0.555 arcseconds to 30.264 arcseconds across different measurement regions. A detailed discussion of the results is also provided.
A near-common-optical-path two-axis surface encoder design is proposed for in-plane and out-of-plane wide-range displacement measurement. A three-layer gratings (TLGs) interference method is newly adopted in the optical design, contributing to a near-common-optical-path for interference beams to improve robustness against environmental disturbances, which had not been realized by conventional surface encoders in out-of-plane Z-axis displacement measurement based on the Michelson interference method. An incident beam is divided into two beams in positive and negative directions at the first layer of transparent grating. At both the positive and negative directions of the second layer of transparent grating, two diffracted beams are generated. One of the diffracted beams incidents on the third layer of scale grating perpendicularly, and the other incidents on the third layer of scale grating at a Littrow angle. The two diffracted beams in each direction then diffracted back to the second layer of transparent grating along the same optical path and superimposed with each other, generating interference signals at each direction, which are received within the sensor head. By calculating the interference signals, two-axis displacement can be obtained simultaneously. A prototype surface encoder is constructed to demonstrate the effectiveness of the proposed TLGs interference method.
Differing from the conventional peak-to-peak method using two neighboring spectral peaks in the frequency-domain fringe spectrum of the spectral response of a Fabry-Perot etalon to a femtosecond laser, which contains N spectral peaks equally spaced with a spacing of the etalon free spectral range (FSR), the proposed method employs a pair of spectral peaks with a spacing of an integer multiple k (k ≫ 1) of FSR for measurement of the etalon cavity length d with a reduced measurement error. Under the constrain of the total N spectral peaks obtainable in the finite spectral range of the femtosecond laser, the optimized k is identified to be N∕2 in consideration of an averaging operation using N − k samples of d to achieve the minimum measurement error. The feasibility of the proposed method is demonstrated by experimental results with an uncertainty analysis based on “Guides to the Expression of Uncertainty in Measurement”.
A measurement method based on a confocal probe on the second harmonic generation that can measure linear and angular displacements in the focusing point is proposed. In the proposed method, a pinhole or an optical fiber placed in front of the detector in conventional confocal probes is replaced by a nonlinear optical crystal, which is utilized as a medium generating second harmonic wave whose light intensity changes by the linear and angular displacements of a target under measurement. The feasibility of the proposed method is verified by theoretical calculations and experiments with the newly designed optical setup. Experimental results have demonstrated that the developed confocal probe has a resolution of 20 nm and 5 arc-seconds for measurement of linear and angular displacements, respectively.
5 March 2024 in International Journal of Automation Technology
This paper presents the design and construction of a new optical head with two phase-shifted interference signals in an absolute surface encoder by using a mode-locked femtosecond laser. A series of discrete absolute positions of the scale grating is obtained from a series of peak wavelengths of the spectrum of the +1st- or -1st-order diffracted beam. The two beams at a specific wavelength λi interfere with each other to generate an incremental interference signal for high-resolution displacement measurement over a small interpolation range around the corresponding discrete absolute position xi. In the previous design of the optical head, the two beams were guided by optical fibers into a fiber coupler for the interference. This fiber optics design was simple and stable but could not identify the moving direction of small displacement within each interpolation range because only one interferential signal could be generated. The aim of this study is to develop a new design of the optical head, where two interference signals with a phase difference of π/2 are generated. For this purpose, free-space optics, instead of fiber optics, is adopted in the new optical head. Experiments are conducted to confirm the generation of the two phase-shifted interference signals. A Lissajous figure is plotted to verify the phase difference between the two signals.