An end-fire circularly-polarized complementary antenna array is proposed for 5G applications. The proposed antenna is realized using a single-layered printed-circuit-board (PCB) with plated-through-hole technology and metal blocks. The antenna element consists of an open-ended substrate integrated waveguide (SIW), an electric dipole, a double-sided parallel-strip line (DSPSL), and two metal blocks. It is simple in configuration and can achieve wide impedance and axial ratio (AR) bandwidths, stable gain and radiation patterns, and low back radiation. To increase the gain, a 1×8 antenna array is formed by integrating eight antenna elements with a planar 1-to-8 SIW feed network. Measurement results show that the proposed array can achieve an overlapping impedance and axial ratio (AR) bandwidth of 23.8% from 56.3 to 71.5 GHz with an end-fire left-handed CP (LHCP) gain from 14 to 15.3 dBic. The proposed array possesses all the salient features of the complementary source in symmetric and stable radiation patterns, low back radiation, and wide bandwidth.
21 January 2019 in IEEE Transactions on Antennas and Propagation
A circularly-polarized differentially-fed magneto-electric dipole (ME-dipole) array is proposed for 5G applications. The proposed transmission-line-excited (TLE) antenna, fabricated on a printed-circuit-board (PCB), can achieve wide impedance and axial ratio (AR) bandwidths and high gain. The antenna consists of a 2×2 ME-dipole array enclosed by a circular cavity. It is modified from our previous work on linearly-polarized (LP) array with its element orientation selectively rotated by ±45° with respect to the differentially-fed transmission line and the use of sequential rotation technique (SRT) to generate circularly-polarized (CP) radiation. A differential feed network is utilized to feed the prototype for experiments. Experiments show that the antenna can present an overlapping impedance and AR bandwidth of 32.2% from 52.2 to 72.2 GHz with a broadside left-handed CP (LHCP) gain from 10.2 to 11.8 dBic. The proposed CP antenna retains all the salient features of our previously proposed linearly-polarized (LP) antenna in symmetric and stable radiation patterns and relatively low back radiation levels.
7 December 2016 in IEEE Antennas and Wireless Propagation Letters
A circularly polarized (CP) antenna based on the complementary source technique is designed for 60-GHz applications. The proposed antenna is composed of a strip dipole, a slot, and a cavity, and it is realized by plated-through-hole and printed-circuit technologies. Experimental results show that the proposed antenna can present an overlapping bandwidth of 21.9% from 53.6 to 66.8 GHz, within which the right-handed CP gain varies from 5.3 to 8.6 dBic and all radiation patterns are relatively symmetric and stable.
7 May 2019 in International Journal of RF and Microwave Computer-Aided Engineering
Based on a simple and effective calculation method, two free‐space measurement setups are employed to investigate the dielectric properties of various materials at terahertz (THz) frequencies. One setup involves THZ time‐domain spectroscopy (THz‐TDS) at a frequency range of 0.4 to 1 THz. The other setup comprises a vector network analyzer (VNA) with pairs of VAN extenders (VNAXs) and diagonal standard gain horns (SGHs) at a frequency range of 0.22 to 1.1 THz. The calculation method is verified for the THz‐TDS system and employed in the VNA system for the first time. Dielectric properties, including refractive indices, power absorption coefficients, relative permittivities, and loss tangents, are calculated from measured transmission data. Several materials, including printed circuit boards and 3D printing materials, are characterized to verify the calculation method and compare the measurement setups.
9 July 2018 in IEEE Transactions on Antennas and Propagation
A differentially-driven transmission-line-excited (TLE) magneto-electric dipole (ME-dipole) is designed for 5G applications. The proposed antenna, realized using a single-layered printed-circuit-board (PCB) with plated-through-hole technology, is simple in configuration yet can achieve wide bandwidth and high gain. The antenna is composed of a 2×2 ME-dipole array surrounded by a rectangular cavity. A differential feed waveguide network based on an E-plane tee is also introduced to feed the prototype for measurements. Measurements show that the proposed antenna with the differential feed network can present an impedance bandwidth of 29.2% from 52.6 to 70.6 GHz with a broadside gain from 10.9 to 13.7 dBi. The proposed antenna retains all the salient features of ME-dipole in symmetric radiation patterns and relatively low cross-polarization and back radiation levels. The radiation patterns are mostly stable with the sidelobes increases toward the higher end of the operating band.
17 April 2023 in IEEE Transactions on Components, Packaging and Manufacturing Technology
The conventional design of filters requires numerous simulations, taking a substantial amount of time and computational resources and requiring extensive expertise. This paper presents a new method to design filters using an optimization algorithm, which can use the fitness function to evaluate the filters autonomously. Experimental results from designing two common filters, including a microstrip filter and a waveguide filter, demonstrate that the proposed approach produces satisfactory results.