Sparse signal processing is widely used in SAR imaging with the development of compressed sensing in recent years. As an efficient tool for sparse reconstruction, L1 regularization induces sparsity most effectively. L1-norm penalty and the total variation (TV)-norm penalty are usually combined as a compound regularizer to enhance point-based features as well as region-based features. However, L1-norm penalty is convex, and the analytic solution of sparse signal reconstrcution algorithm based on L1 regularization is a biased estimation. In this paper, we quantitatively analyze the variation of reconstruction bias with complex reflectivity of targets, undersampling ratio and noise power. In order to suppress the bias effect and improve the reconstruction accuracy, we adopt the nonconvex regularization based sparse SAR imaging method with a family of nonconvex penalties. Furthermore, this paper linearly combine the nonconvex penalty and the TV-norm penalty as a compound regularizer in the imaging model, which can improve the reconstruction accuracy of distributed targets as well as maintain the continuity of the backscattering coefficient. Simulation results show that compared with L1 regularization, nonconvex regularization can reduce the average relative bias from 10.88% to 0.25%, compared with the matched filtering method and L1 & TV regularization, nonconvex & TV regularization can reduce the variance of the distributed target with uniform backscattering coefficient by 80% while guaranteeing the reconstruction accuracy. Experiments based on Gaofen-3 SAR data are also performed to verify the effectiveness of the proposed method.
21 December 2020 in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
The azimuth multichannel synthetic aperture radar (SAR) technology is capable of overcoming the minimum antenna area constraint and achieving high-resolution and wide-swath (HRWS) imaging. Generally speaking, the pulse repetition frequency (PRF) of the spaceborne multichannel SAR systems should satisfy the azimuthal uniform sampling condition, but it is sometimes impossible due to the limitation of radar system timing conditions, which is often referred as “coverage diagram.” For the Gaofen-3 system, the PRF of each channel at some beam positions is slightly less than that of uniform sampling in the dual-channel mode, leading to the nonuniform undersampling, hence, resulting the azimuth ambiguities in the recovered images. Although the ambiguous energy in Gaofen-3 images is not high in general, it is still noticeable amid surrounding weak clutters of strong targets. In this article, a novel multichannel SAR imaging method for nonuniform undersampling based on ${{\boldsymbol{L}}_{2,{\boldsymbol{q}}}}$ regularization $(0 < {\boldsymbol{q}} \leq 1)$ is proposed. By analyzing the reasons of azimuth ambiguities in the multichannel SAR system, the imaging model is established with emphasizing the difference from conventional single-channel SAR. Then, we combine the multichannel SAR data processing operators with the group sparsity property to construct the novel imaging method. The group sparsity property is modeled by the $2,{\boldsymbol{q}}$ -norm, and the ${{\boldsymbol{L}}_{2,{\boldsymbol{q}}}}$ regularization problem can be solved via sparse group thresholding function. It is shown that the proposed method can efficiently suppress the azimuth ambiguities caused by nonuniform undersampling. Simulations and Gaofen-3 real data experiments are exploited to verify the effectiveness of the proposed method.
High-resolution wide-swath (HRWS) imaging is the research focus of the modern spaceborne synthetic-aperture radar (SAR) imaging field, with significant relevance and vast application potential. Staggered SAR, as an innovative imaging system, mitigates blind areas across the entire swath by periodically altering the radar pulse repetition interval (PRI), thereby extending the swath width to multiples of that achievable by conventional systems. However, the staggered mode introduces inherent challenges, such as nonuniform azimuth sampling and echo data loss, leading to azimuth ambiguities and substantially impacting image quality. This paper proposes a sparse SAR imaging method for the low-oversampled staggered mode via compound regularization. The proposed method not only effectively suppresses azimuth ambiguities arising from nonuniform sampling without necessitating the restoration of missing echo data, but also incorporates total variation (TV) regularization into the sparse reconstruction model. This enhances the accurate reconstruction of distributed targets within the scene. The efficacy of the proposed method is substantiated through simulations and real data experiments from spaceborne missions.
Sparse signal processing theory has been applied to synthetic aperture radar (SAR) imaging. In compressive sensing (CS), the sparsity is usually considered as a known parameter. However, it is unknown practically. For many functions of CS, we need to know this parameter. Therefore, the estimation of sparsity is crucial for sparse SAR imaging. The sparsity is determined by the size of regularization parameter. Several methods have been presented for automatically estimating the regularization parameter, and have been applied to sparse SAR imaging. However, these methods are deduced based on an observation matrix, which will entail huge computational and memory costs. In this paper, to enhance the computational efficiency, an efficient adaptive parameter estimation method for sparse SAR imaging is proposed. The complex image-based sparse SAR imaging method only considers the threshold operation of the complex image, which can reduce the computational costs significantly. By utilizing this feature, the parameter is pre-estimated based on a complex image. In order to estimate the sparsity accurately, adaptive parameter estimation is then processed in the raw data domain, combining with the pre-estimated parameter and azimuth-range decouple operators. The proposed method can reduce the computational complexity from a quadratic square order to a linear logarithm order, which can be used in the large-scale scene. Simulated and Gaofen-3 SAR data processing results demonstrate the validity of the proposed method.
The dual-station Interferometric Synthetic Aperture Radar (InSAR) system can overcome the physical limitations imposed by the baseline of single-station dual-antenna InSAR. It provides greater flexibility and can enhance elevation measurement accuracy through a well-designed baseline configuration.Unmanned aerial vehicles (UAV) equipped with dual-station InSAR, with relatively low cost and high flexibility, are useful for mapping and land resource exploration. However, due to challenges including spatiotemporal synchronization and motion errors, there are limited reports on UAV-borne dual-station InSAR. This paper proposes a comprehensive method for processing data from small UAV-borne dual-station InSAR by integrating two-way synchronization chain signals. The proposed method includes compensation for time and phase synchronization errors, trajectory refinement with synchronized chain and Position and Orientation System (POS) data, high-precision dual-station InSAR imaging and interferometric processing. Height inversion results based on the proposed method is also provided, demonstrating the effectiveness of the proposed method and improving interferometric accuracy at calibration points from 0.66 meters to 0.42 meters.
The bistatic Interferometric Synthetic Aperture Radar (InSAR) system can overcome the physical limitations imposed by the baseline of monostatic dual-antenna InSAR. It provides greater flexibility and can enhance elevation measurement accuracy through a well-designed baseline configuration. Unmanned aerial vehicles (UAVs) equipped with bistatic InSAR, having relatively low cost and high flexibility, are useful for mapping and land resource exploration. However, due to challenges including spatiotemporal synchronization and motion errors, there are limited reports on UAV-borne bistatic InSAR. This paper proposes a comprehensive method for processing data from small UAV-borne bistatic InSAR by integrating two-way synchronization chain signals. The proposed method includes compensation for time and phase synchronization errors, trajectory refinement with synchronized chain and Position and Orientation System (POS) data, high-precision bistatic InSAR imaging, and interferometric processing. Height inversion results based on the proposed method are also provided, which demonstrate the effectiveness of the proposed method in improving the accuracy of interferometric measurement at calibration points from 0.66 m to 0.42 m.