A total of 92 commercial compound feeds from South Africa were investigated for various mycotoxins. The data reveal the highest incidence of feed contamination for fumonisins (FB) (range: 104–2999 µg/kg) followed by deoxynivalenol (DON) (range: 124–2352 µg/kg) and zearalenone (ZEA) (range: 30–610 µg/kg). The incidence of ochratoxin A (OTA) and aflatoxins (AF)-contaminated samples were generally low, i.e., 4% and 30% of samples with levels ranging between 6.4 and 17.1 µg/kg (mean: 9.9 µg/kg) for OTA and 0.2 to 71.8 µg/kg (mean: 9.0 µg/kg) for AF. No samples contained T-2 toxin or HT-2 toxin. However, all samples analyzed were contaminated with at least one mycotoxin with a majority containing several mycotoxins. In particular, 3 of 4 positive samples mainly cattle feeds that had relatively high contents of OTA (ranging from 7 to 17.1 µg/kg) also contained high amounts of AF (>27.5 µg/kg) together with FB, DON and ZEA. Apart from a few samples, the levels of mycotoxins may be regarded as safe for livestock production in South Africa. However, the persistent co-occurrence of mycotoxins in samples, especially those at high concentrations, i.e., AF and OTA, together with other mycotoxins studied, may elicit synergistic or additive effects in animals. This should raise concern as multiple contaminations may pose a risk to livestock production and health.
25 January 2013 in Food Additives & Contaminants: Part A
Animal feed can be contaminated with various mycotoxins. To ensure animal health and safe food and feed production, the European Commission has recommended increased monitoring of the co-occurrence of deoxynivalenol, zearalenone, ochratoxin A, fumonisin B1 and B2, T-2 and HT-2 toxin in feed. Thus, there is a need for an analytical method that enables their simultaneous detection and quantification. This paper describes the development and in-house validation of such a method, in which the mycotoxins were extracted from spiked and naturally contaminated cereal-based compound feed, corn and wheat. The extracts were divided into two aliquots where one was diluted and then analysed directly and the other was cleaned by using MultiSep®226 and then diluted and analysed. Separation and detection was achieved with LC-ESI-MS/MS by using a triple quadrupole instrument in the SRM mode. The precision (in terms of intra-day repeatability and inter-day reproducibility), accuracy, linearity, apparent recovery and expanded measurement uncertainty in feed, corn and wheat were evaluated. The LODs ranged from 1.0 to 72 μg/kg, and the LOQs ranged from 2.5 to 115 μg/kg. The apparent recovery was higher than 86% for all the mycotoxins, and the precision was better than that defined by the Horwitz equation for all concentrations. Proficiency test materials were analysed to assess the accuracy of the method, and the results were satisfactory for all seven mycotoxins. The method will be used to monitor the occurrence of these mycotoxins in products intended for animal feeding in Sweden.
28 April 2010 in Rapid Communications in Mass Spectrometry