The optimization of the synthesis of III-V compounds is a crucial subject in enhancing the external quantum efficiency of blue LEDs, laser diodes, quantum-dot solar cells, and other devices. There are several challenges in growing high-quality InGaN materials, including the lattice mismatch between GaN and InGaN causing stress and piezoelectric polarization, the relatively high vapor pressure of InN compared to GaN, and the low level of incorporation of indium in InGaN materials. Furthermore, carrier delocalization, Shockley–Read–Hall recombination, auger recombination, and electron leakage in InGaN light-emitting diodes (LEDs) are the main contributors to efficiency droop. The synthesis of high-quality III-V compounds can be achieved by optimizing growth parameters such as temperature, V/III ratios, growth rate, and pressure. By reducing the ammonia flow from 200 sccm to 50 sccm, increasing the growth rate from 0.1 to 1 m/h, and lowering the growth pressure from 250 to 150 Torr, the external quantum efficiency of III-V compounds can be improved at growth temperatures ranging from 800 °C to 500 °C. It is crucial to optimize the growth conditions to achieve high-quality materials. In addition, novel approaches such as adopting a microrod crystal structure, utilizing the piezo-phototronic effect, and depositing AlN/Al2O3 on top of the P-GaN and the electron-blocking layer can also contribute to improving the external quantum efficiency. The deposition of a multifunctional ultrathin layers of AlN/Al2O3 on top of the P-GaN can enhance the peak external quantum efficiency of InGaN blue LEDs by 29%, while the piezo-phototronic effect induced by a tensile strain of 2.04% results in a 183% increase in the relative electroluminescence intensity of the LEDs. This paper also discusses conventional and inverted p-i-n junction structures of LEDs.
This paper presents a design method for a watt-level high-efficiency broadband power amplifier (BPA) with a generalized parallel-circuit (PC) Class-E model. A combination of the single-reactance compensation technique (S-RCT) and Chebyshev low-pass (LP) impedance matching network (MN) is used for achieving PA’s broadband characteristics. The analytical expression of the operation and power loss mechanisms of PC Class-E PA, which includes the effects of a finite DC-feed inductance, transistor on-resistance, and a broadband MN, is elaborated. As an example, a highly-efficient broadband PC (BPC) Class-E PA operating at 12 V drain supply voltage is implemented and verified experimentally. The designed PA exhibits high-efficiency characteristics of 82.15%-86.3% drain efficiency (DE) and 36.92-38.57 dBm output power ( Pout ) with 19.95-23.11 dB power gain in the band from 7 MHz to 9.4 MHz. The measured results show good agreement with the theoretical and simulated results.
20 August 2024 in IEEE Microwave and Wireless Technology Letters
In this article, a high-efficiency push–pull parallel-circuit (PC) Class-E/F $_{3}$ power amplifier (PA) with a harmonic suppression network for radio frequency identification (RFID) applications is presented. With the double reactance compensation technique (D-RCT), the PA’s design of broadband performance is achieved. In addition, a low-pass (LP) Chebyshev technique is introduced to provide a simple fundamental matching network (MN). Finally, a high-efficiency push–pull PC Class-E/F $_{3}$ PA is fabricated and measured. The experimental results illustrate that an output power ( P $_{\text{out}}$ ) is from 36.83 to 41.84 dBm and 82.35%–91.32% drain efficiency (DE) operating from 5 to 10.5 MHz frequency range, which agrees well with the simulation results.
15 April 2024 in International Journal of Circuit Theory and Applications