Vibrating flip-flow screens have been widely used in the mineral processing industry. As the key components, flip-flow screen panels strongly affect the dynamics of vibrating flip-flow screens. However, there is no systematic research into this problem. In this study, the dynamic characteristics of flip-flow screen panel are identified by the finite element analysis. Furthermore, a nonlinear coupling dynamic model of vibrating flip-flow screens that considers the effects of flip-flow screen panels is proposed, and the analytical and numerical solutions of its governing equation are deduced via the equivalent linearization method and the time marching method. Also, experimental results show that the proposed model describes the movements of vibrating flip-flow screens more accurately than the classical mechanical model which does not consider flip-flow screen panels. Finally, the effects of the screen panel’s parameters, such as the slack length and the stiffness, on the dynamics of vibrating flip-flow screens are investigated.

The flip-flow vibrating screen (FFVS) is a novel multi-body screening equipment that utilizes vibrations to classify bulk materials in the field of screening machinery. The relative amplitude of FFVSs determines the tension and ejection intensity of elastic flip-flow screen panels, which is a critical operating parameter affecting the screening performance. However, FFVSs generally suffer from large variations of relative amplitude caused by the loading of materials and the changes in shear spring stiffness (the temperature changes of the shear springs lead to their stiffness changes), which significantly reduce the screening efficiency and lifespan of FFVSs. To address this problem, this paper proposes a nonlinear stiffness-based method for stabilizing the vibration amplitude of FFVSs using piecewise linear springs. By introducing these springs between the two frames, the sensitivity of the relative amplitude to shear spring stiffness is reduced, thereby achieving the stabilization of the relative amplitude of FFVSs. In this study, the variations of the vibration amplitude of the FFVS due to the loading of materials and the changes in shear spring stiffness were first demonstrated in a reasonable operating frequency range. Then the reasonable operating frequency range and dynamics of the resultant nonlinear flip-flow vibrating screen (NFFVS) with piecewise linear springs were investigated using the harmonic balance method (HBM) and the Runge–Kutta numerical method. The operating frequency region for the NFFVS lies between the critical frequency ${\omega }_{cs}$ and the frequency ${\omega }_{lb}$ corresponding to the saddle-node bifurcation point. Finally, a test rig was designed to validate the theoretical predictions. Theoretical and experimental results demonstrate that piecewise linear springs can effectively stabilize the relative amplitude of the FFVS.

Flip-flow vibrating screens (FFVSs) effectively tackle the challenges posed by the dry deep-screening of wet, fine, low-grade bituminous coal, thereby facilitating advancements in the thermal coal preparation process. The tensile lengths of the screen panels not only influence the service lives of the screen panels but also play a pivotal role in determining the screening performance of the FFVSs. To investigate the effect of the screen-panel tensile length on the screening performance of an FFVS, this study constructs a dual-mass flip-flow screening test rig. The experimental results reveal that when the fine-particle content and the external water content in the feed of low-grade bituminous coal are 55% and 16%, respectively, the most favorable tensile length of the screen panels is 2 mm. With a fine-particle content of 55% in the feed of low-grade bituminous coal and an increase in the external water content from 4% to 20%, the screening efficiency of the FFVS initially decreases and then increases. Notably, low-grade bituminous coal with 16% external water content poses the most challenging screening conditions. Furthermore, when the external water content of the low-grade bituminous coal is 16% and the fine-particle content in the feed increases from 25% to 55%, the screening efficiency of the FFVS gradually improves.