Due to the increased usage of renewables, nowadays, researches are focused on smart grid technologies. Among those micro grids are getting popular. It is a critical subject to plan the future production and consumption on a micro grid. On the other hand electrical load forecasting is imperative for planning a micro grid. In this study ANS Campus area of the Afyon Kocatepe University is considered as a micro grid and it is aimed to forecast the hourly electricity demand of the campus area. The campus are includes some loads in different characteristics since the area has different buildings such as; residential buildings, education buildings, laboratories, research centers, hospitals and social buildings. The electricity demand is predicted using Artificial Neural Networks. The actual season, time and electricity consumption are considered as inputs of the network and the next hour demand is predicted. The results show that the proposed approach is well performed in such applications.
31 December 2022 in Bilecik Şeyh Edebali Üniversitesi Fen Bilimleri Dergisi
Enerji sektöründe arz-talep yönetimi, gelişmekte olan ve büyüyen ülke ekonomileri için öncelikli öneme sahiptir. Artan nüfusa, yükselen ekonomiye ve sanayideki gelişmelere bağlı olarak ülkelerin enerji ihtiyaçları da büyük ölçüde artmaktadır. Bu nedenle, gelecekteki elektrik arz-talep eğilimlerinin doğru ve güvenilir bir şekilde tahmin edilmesi için modeller kullanılması, tüketiciler ve bu alandaki yatırımcılar için dikkat çeken bir konu olmuştur. Bu çalışmada, Türkiye kısa dönem elektrik yük talep tahminini gerçekleştirebilmek için başarıları literatürde kanıtlanmış makine öğrenmesi yöntemlerinden, Yapay Sinir Ağları, Ridge Regresyon, Lasso Regresyon ve Destek Vektör Regresyonu kullanılmıştır. Tahmin modellerinde kullanılan veriler Türkiye Elektrik İletim Anonim Şirketi’nden temin edilmiştir. Geçmişe dönük saatlik frekansta ölçülmüş bir yıllık veri seti ile bir saatlik ileriye yönelik tahminler gerçekleştirilmiştir. Yöntemlerden elde edilen sonuçların karşılaştırılabilmesi için literatürde sık kullanılan performans ölçüt kriterlerinden RMSE, MAE ve R^2değerleri hesaplanmıştır. Yapay Sinir Ağları, geliştirilen makine öğrenmesi modelleri arasında RMSE=0,86, MAE=0,62 ve R^2=0,97 sonuçları ile daha başarılı bulunmuştur.
2 August 2018 in Afyon Kocatepe University Journal of Sciences and Engineering
The constant expansion of solar energy has made the accurate forecasting of radiation an important issue. An accurate prediction of solar energy production is crucial for the effective integration of photovoltaic (PV) and wind generators in smart grids. The intermittent nature of solar energy poses many challenges to renewable energy system operators in terms of operational planning and scheduling. For this reason, forecasting solar radiation by means of the hybrid methods is becoming widespread. In this paper, a hybrid method for predicting solar radiation is proposed, wherein the prediction model is determined based on the clearness index. The study used two-year solar radiation data of the province of Mardin obtained from the Turkish State Meteorological Service (TSMS). As predictors, ANN, NARX networks, and Ridge regression methods were used, and the training data were modeled with all three approaches in the first stage of the study. The clearness index was determined into three ranges; slightly cloudy, cloudy, and mostly cloudy. The training data were modeled with three methods used as estimators, and the success of each method was examined in each defined clearness index range. As a result, in the hybrid prediction algorithm, the clearness index is first estimated using artificial neural networks, and then the future solar radiation value is predicted by using the most successful model within the predicted clearness index range. Experimental results show that more successful predictions are made with the proposed hybrid method than when models are used individually.
28 May 2019 in Afyon Kocatepe University Journal of Sciences and Engineering
Teknolojinin gelişimi, devam eden nüfus artışı gibi nedenler enerji ihtiyacının sürekli artmasına neden olmaktadır. Bununla beraber tükenen fosil yakıtlar, hem farklı kaynaklardan enerji üretimini zorunlu kılmış, hem de sürdürülebilir kaynaklardan enerji üretimini zorunlu hale getirilmiştir. Rüzgardan enerji üreten sistemler hem sürdürülebilir hem de çevre dostu olmaları sebebi ile yaygın kullanım alanına sahiptir. Bir rüzgar türbiniden üretilecek enerji o bölgedeki rüzgar hızı ile doğrudan bağlantılıdır. Bu çalışmada, Doğrusal Tahmin Filtreleri tasarlanarak, Afyon Kocatepe Üniversitesi kampüs alanına tesis edilmiş bir meteoroloji istasyonundan toplanan rüzgar hızı verilerinin başarılı bir şekilde modellenmesi hedeflenmiştir. Çalışmada hem iki boyutlu hem de çok boyutlu doğrusal tahmin filtreleri tasarlanmıştır. Çok boyutlu doğrusal tahmin filtreleri, modelleme çalışmasında rüzgar hızlarının geçmişteki değerlerinin yan sıra basınç verisinin de modele dahil edilmesine olanak sağlamıştır. Gerçekleştirilen simülasyon sonuçları gözönüne alınarak hem doğrusal tahmin filtrelerinin kısa dönem rüzgar hızı modellemesindeki başarısı incelenmiş, hem de iki boyut ve çok boyutlu doğrusal tahmin filtrelerinin başarısı karşılaştırılmıştır. Elde edilen sonuçlar hem iki boyutlu hem de çok boyutlu doğrusal tahmin filtrelerin kısa dönem rüzgar hızı modellemedeki başarısını ortaya koymuştur.
27 February 2016 in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
In marble industry, it is of vital importance to determine the damaged discs on time to prevent possible industrial injuries. Therefore, in this study, it is proposed to classify the status of the cutting discs that are used while cutting the natural stones. To classify the deflections of the discs, 673 different experiments are performed. Cutting discs corresponding to four different damage classes (undamaged disc, less damaged disc, much damaged disc, and broken disc) are employed in the tests. Eight different parameters (cutting forces (Fx, Fy, Fz), noise, peripheral speed of the disc, current, voltage, power consumption) are measured and recorded in the experiments. For each experiment, mean values of different measured data are studied. Artificial neural networks are employed as classifiers. In the first stage, all of these mean values corresponding to eight parameters are selected as the input vectors of the artificial neural networks, whereas in the second stage, the dimension of input vector is decreased by leaving out the parameters one by one. In this stage, it is aimed to determine the most important parameter that caries much more information about the cutting process.