Witold Niewiem

Mr. Witold Niewiem

CERN
orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 December 2017 in Sensors
Verified
Journal Article
Open access
PDF file
PĆPaweł Ćwiąkała
Paweł Ćwiąkała
RKRafał Kocierz
Rafał Kocierz
EPEdyta Puniach
Edyta Puniach
MNMichał Nędzka
Michał Nędzka
KMKarolina Mamczarz
Karolina Mamczarz
PWPaweł Wiącek
Paweł Wiącek
The research described in this paper deals with the documentation of hiking trails in alpine areas. The study presents a novel research topic, applying up-to-date survey techniques and top quality equipment with practical applications in nature conservation. The research presents the initial part of the process—capturing imagery, photogrammetric processing, quality checking, and a discussion on possibilities of the further data analysis. The research described in this article was conducted in the Tatra National Park (TNP) in Poland, which is considered as one of the most-visited national parks in Europe. The exceptional popularity of this place is responsible for intensification of morphogenetic processes, resulting in the development of numerous forms of erosion. This article presents the outcomes of research, whose purpose was to verify the usability of UAVs to check the condition of hiking trails in alpine areas. An octocopter equipped with a non-metric camera was used for measurements. Unlike traditional methods of measuring landscape features, such a solution facilitates acquisition of quasi-continuous data that has uniform resolution throughout the study area and high spatial accuracy. It is also a relatively cheap technology, which is its main advantage over equally popular laser scanning. The paper presents the complete methodology of data acquisition in harsh conditions and demanding locations of hiking trails on steep Tatra slopes. The paper also describes stages that lead to the elaboration of basic photogrammetric products relying on structure from motion (SfM) technology and evaluates the accuracy of the materials obtained. Finally, it shows the applicability of the prepared products to the evaluation of the spatial reach and intensity of erosion along hiking trails, and to the study of plant succession or tree stand condition in the area located next to hiking trails.

11 November 2020 in Remote Sensing
Verified
Journal Article
Open access
PDF file
EPElzbieta Pastucha
Elzbieta Pastucha
EPEdyta Puniach
Edyta Puniach
AŚAgnieszka Ścisłowicz
Agnieszka Ścisłowicz
PĆPaweł Ćwiąkała
Paweł Ćwiąkała
Witold NiewiemWitold Niewiem
Witold Niewiem
PWPaweł Wiącek
Paweł Wiącek
Regular power line inspections are essential to ensure the reliability of electricity supply. The inspections of overground power submission lines include corridor clearance monitoring and fault identification. The power lines corridor is a three-dimensional space around power cables defined by a set distance. Any obstacles breaching this space should be detected, as they potentially threaten the safety of the infrastructure. Corridor clearance monitoring is usually performed either by a labor-intensive total station survey (TS), terrestrial laser scanning (TLS), or expensive airborne laser scanning (ALS) from a plane or a helicopter. This paper proposes a method that uses unmanned aerial vehicle (UAV) images to monitor corridor clearance. To maintain the adequate accuracy of the relative position of wires in regard to surrounding obstacles, the same data were used both to reconstruct a point cloud representation of a digital surface model (DSM) and a 3D power line. The proposed algorithm detects power lines in a series of images using decorrelation stretch for initial image processing, the modified Prewitt filter for edge enhancement, random sample consensus (RANSAC) with additional parameters for line fitting, and epipolar geometry for 3D reconstruction. DSM points intruding into the corridor are then detected by calculating the spatial distance between a reconstructed power line and the DSM point cloud representation. Problematic objects are localized by segmenting points into voxels and then subsequent clusterization. The processing results were compared to the results of two verification methods—TS and TLS. The comparison results show that the proposed method can be used to survey power lines with an accuracy consistent with that of classical measurements.

7 December 2023 in Optics Express
Verified
Journal Article
Open access
Witold NiewiemWitold Niewiem
Witold Niewiem
KPKrystof Polak
Krystof Polak
MDMartin Dusek
Martin Dusek
DMDirk Mergelkuhl
Dirk Mergelkuhl
JGJean-Christophe Gayde
Jean-Christophe Gayde
MSMiroslav Sulc
Miroslav Sulc
The alignment of particle accelerators demands a dedicated measurement system based on a straight-line reference. This straight line can be provided by a laser beam. The alignment then involves accurately measuring the offset of accelerator components with respect to this light path. In order to be efficient, the laser beam needs to serve as a stable and straight reference for distances of several hundreds of meters. The attainable accuracy depends, among other parameters, on the laser spot size, which should ideally change very little over the distances at which the alignment system needs to operate. Due to the significant divergence of Gaussian laser beams, we propose using a structured laser beam (SLB) for alignment. Its transversal intensity profile is similar to a Bessel beam and consists of an intense inner core (IC) and concentric rings. The divergence of the IC, i.e., the growth of its size with distance, can be limited to 10μrad using a favorable generator configuration. Thus an SLB may be suitable as a straight-line reference for long-distance alignment applications. However, the SLB is distorted if obstructions cover parts of the outermost ring (OR) of the beam within, which should therefore also be small. In this paper, we investigate the relationship between the size of the IC and OR depending on the design parameters of the SLB generator. We use numerical simulations and experiments with different generators over distances up to 50 m to analyze the transversal intensity profile and wavefronts of different SLBs. The results indicate the general suitability of an SLB as a reference line for long-distance alignment but also expose tradeoffs between small IC and small OR. The findings outlined in the paper help to describe the optimal SLB parameters for given conditions.

25 June 2025 in Applied Optics
Verified
Journal Article
Open access
Witold NiewiemWitold Niewiem
Witold Niewiem
SFSebastian Figura
Sebastian Figura
DMDirk Mergelkuhl
Dirk Mergelkuhl
JGJean-Christophe Gayde
Jean-Christophe Gayde
MSMiroslav Sulc
Miroslav Sulc
AWAndreas Wieser
Andreas Wieser
This study explores how reflections affect the transverse intensity profile of a structured laser beam (SLB) in alignment systems. The research evaluates the impact of pipe material and geometry on noise affecting the inner core (IC) of the SLB’s transverse intensity profile. The results show that using a vacuum pipe setup with a black, undulated pipe of high surface roughness and a low-coherence laser source significantly reduces noise, enhancing the detection accuracy of the IC. A 140 m long-distance measurement demonstrates that discrepancies between various position detection algorithms are reduced to sub-pixel levels with such a setup. These findings facilitate the development of highly accurate and reliable optical alignment systems based on a reference line defined by an SLB.

29 April 2025 in Optics Express
Verified
Journal Article
Open access
Witold NiewiemWitold Niewiem
Witold Niewiem
KPKrystof Polak
Krystof Polak
SFSebastian Figura
Sebastian Figura
DMDirk Mergelkuhl
Dirk Mergelkuhl
JGJean-Christophe Gayde
Jean-Christophe Gayde
AWAndreas Wieser
Andreas Wieser
The inner core (IC) of a structured laser beam (SLB) can serve as a straight reference line for optical measurements. However, obstructions near the beam may disrupt the beam symmetry and cause the IC to bend. This study presents numerical simulations and experimental validation of the symmetry breaking of an SLB for distances up to 140 m. We find IC displacements of more than 2 mm if the obstruction occurs within the near zone of about 1.9 m from the generator, and up to about 0.3 mm if the obstruction occurs in the far zone. These values are orders of magnitude above the noise level of the measurements. Symmetry breaking is a potential accuracy limitation when using SLBs for alignment purposes. The present investigation corroborates that symmetry breaking can be analyzed using numerical simulations and does not require extensive physical testing. This is a crucial prerequisite for designing SLB-based highly accurate alignment systems. Additionally, the numerical results provide insights useful for roughly predicting the clear space required around SLBs to ensure straight reference lines.

1 June 2018
Verified
Conference Paper
Closed access
Witold NiewiemWitold Niewiem
Witold Niewiem
The paper presents basic construction principles of a new, original device called FocusSphere. The device is used to acquire photographic data and their geometrical properties for the purpose of close range photogrammetry. First of all, the paper shows how micro close range photogrammetry is successfully used in many areas. Subsequently, the construction of the device is briefly presented. The most important features and their influence for obtained results are discussed. The paper portrays also the process of determining the orientation of images for any FocusSphere program. For this purpose total station and photogrammetric measurements are made. The results of the measurements are analysed due to determine movements characteristics of the machine. Finally, the paper depicts main similarities and differences between FocusSphere and existing, conterminous technologies. The advantages and disadvantages of each solution are discussed.