The Fe oxidation state, coordination geometry, and distances have been determined by Fe K-edge XANES and EXAFS for a set of silicate glasses of phonolite composition produced at different oxygen fugacity conditions with the aim of determining the effect of iron oxidation state and local structural environment on the viscosity of the corresponding melts. Comparison of the pre-edge peak data with those of Fe model compounds with known oxidation state and coordination number allowed for determination of the Fe oxidation state and coordination number for all the glasses analyzed. The Fe³⁺/(Fe³⁺+Fe²⁺) ratio varies from 0.44 to 0.93 (±0.05) in the glasses studied. The determined values are in excellent agreement (within 0.03 difference) with those independently measured by the titration method. Moreover, pre-edge peak data clearly indicate that Fe³⁺ is in fourfold coordination, whereas Fe²⁺ exists both in fourfold and fivefold coordination for this phonolitic composition, although the presence of minor amounts of sixfold-coordinated Fe cannot be ruled out by XANES data alone. EXAFS data of the most oxidized sample indicate that Fe³⁺ is in tetrahedral coordination with = 1.85 Å (±0.01). This value compares well with literature data for ^[4]Fe³⁺ (e.g., in tetra-ferriphlogopite or rodolicoite). Calculated NBO/T ratios decrease with Fe oxidation (from 0.23 to 0.19).

Iron oxidation state and coordination geometry have been determined by Fe K-edge X-ray absorption near edge spectroscopy (XANES) for three sets of silicate glasses of peralkaline rhyolitic composition with different peralkalinity values. These compositions were chosen to investigate the effect of alkali content (and oxygen fugacity) on the Fe oxidation state. The samples were produced by means of hydrothermal vessels at 800 °C with oxygen fugacity conditions ranging from NNO-1.61 to NNO+2.96 log units. Comparison of the pre-edge peak data with those of Fe model compounds of known oxidation state and coordination number allowed determination of the Fe oxidation state and coordination number in all glasses analyzed. Within each group of samples, Fe tends to oxidize with increasing oxygen fugacity as expected. However, alkali content is shown to have a strong effect on the Fe³⁺/(Fe³⁺+Fe²⁺) ratio at constant oxygen fugacity: this ratio varies from 0.25 to 0.55 (±0.05) for the least peralkaline series, and from 0.45 to 0.80 (±0.05) for the most peralkaline series. Moreover, pre-edge peak data clearly indicate that Fe³⁺ is in fourfold coordination in the most peralkaline glasses. Extrapolation of pre-edge peak data suggests the presence of both fourfold and fivefold coordination for trivalent Fe in the other two series. Divalent Fe is suggested to be mainly in fivefold coordination in all the three glass series. The presence of minor amounts of sixfold- and fourfold-coordinated Fe cannot be ruled out by XANES data alone. XANES data suggest that the amount of alkalis also affects the Fe³⁺ coordination environment resulting in a decrease in the average coordination numbers. Extended X-ray absorption fine structure (EXAFS) data of the most oxidized and peralkaline sample indicate that Fe³⁺ is in tetrahedral coordination with = 1.85 Å (±0.02). This value compares well with literature data for ^[4]Fe³⁺ in crystalline phases (e.g., in tetra-ferriphlogopite or rodolicoite) or in silicate glasses (e.g., phonolite glasses) supporting the XANES-determined coordination number obtained for the most peralkaline glasses. Calculated NBO/T ratios decrease slightly with Fe oxidation because of the higher fraction of network forming Fe, thus increasing the polymerization of the tetrahedral network.

The study of iodine in glasses and melts is critical in many areas, from geosciences to materials science to waste management. Glasses in the ternary system Na₂O-B₂O₃-SiO₂ were studied with the goal of identifying a glass matrix able to dissolve large quantities of this element, and to identify the main parameters affecting the solubility of iodine. Two sets of experiments were carried out: the first one with the aim of determining the solubility limit of iodine, and the second one to identify the structural variations occurring within the glass network upon iodine incorporation, and to identify the parameters influencing the most both iodine solubility and speciation. We demonstrated that there is a strong dependence of iodine incorporation on bulk chemistry and glass physical properties. A solubility limit of ~5 mol% I has been assessed for B₂O₃-rich glasses and of ~1 mol% for SiO₂-rich ones, and this composition dependence has been explained by considering the fragility parameter of the glass network. Structural variations in the iodine local environment and in the glass network were characterized by Raman, X-ray Absorption Spectroscopy, and ¹¹B NMR. Spectroscopy data point out the coexistence of different I species within the glasses, with iodide being the predominant one, surrounded by Na⁺ ions.