Recently, the use of 3D printer technology has become significant to industries, especially when involving the new product development. 3D printing is a technology, which produces the 3D product or prototype using a layer-by-layer technique. However, there becomes less research on the mechanical performance of the 3D printed component. In the present work, fatigue characteristics of 3D printed specimen have been studied. Acrylonitrile butadiene styrene (ABS) has been chosen as a material research due to its wide applications. Two types of specimen used, which is the 3D printing and moulding specimens. Fused deposition modelling (FDM) technique was used to produce the specimens. The dog bone shape part was produced based on ASTM D638 standard and the tensile test has been carried out to get the mechanical properties. Fatigue test was carried out at 40%, 60% and 80% of the tensile strength. The moulded part shows higher fatigue cycles compared to 3D printed part for all loading percentages. Fatigue lives for 40%, 60% and 80%, were 911, 2645 and 26948 cycles, respectively. The results indicated that 3D printed part has a lower fatigue life, which may not suitable for industrial applications. However, the 3D printed part could be improved by using various parameters and may be introduced in low strength application.
1 June 2016 in International Journal of Automotive and Mechanical Engineering
This study aims to investigate the fatigue behaviour and determine the fatigue life prediction under biaxial loading. Fatigue tests were performed according to ASTM 2207-02 and the values of tensile stresses are selected from the ultimate tensile strength which is 0.5 Su, 0.6 Su, 0.7 Su, 0.8 Su and 0.9 Su, while the torsion angle representing the shear stresses acting was set at 15 degrees. The biaxial fatigue test was conducted using a combination of two types of stresses acting on the same frequency, namely 1 Hz, on smooth specimens made from medium carbon steel. The biaxial fatigue lives of the specimens are recorded when the specimen has completely fractured. The results indicate that the observed fatigue lives are in good agreement with the predicted lives by using the Coffin–Manson, Morrow, and Smith–Watson–Topper strain-based models. Mohr’s circle approach was used to determine the maximum shear stress and principal normal stress. The maximum shear stress increased from 457 MPa to 486 MPa with the increment of principal normal stress from 612 MPa to 767 MPa. The principal stresses, maximum shear stresses, and energy dissipated were used to explain and describe the behaviour of biaxial fatigue. Both stresses are inversely proportional to the fatigue life. Meanwhile, the energy is linearly proportional to the stress applied, where the values increase in the range 500 kJ/m3 to 605 kJ/m3 . Thus, the basic understanding of the material behaviour may be used in the processes of declaring component service lives and the fatigue life prediction of a particular automotive component. Therefore, the cost incurred can be reduced for the development process in material engineering.
Fatigue damage assessment is very important in design process of the component to determine their durability under service loading conditions. In service, the great majority of structures and components are subjected to stress of variable amplitude loading. The purpose of this research is to analyse statistically of two types of strain signals from road loading and compare their effect on fatigue damage of the engine mount bracket. Strain gauges were attached to the engine mount bracket and were connected to the data acquisition set in order to capture the actual strain signals when an automobile was driven on two different road surfaces. The strain signals were then analysed using global signal statistic and integrated kurtosis based algorithm for Z-filter (I-kaz) method. Meanwhile, damage of the engine mount bracket was evaluated using finite element commercial software. From the analysis, it was found that the fatigue damage showed an increment with the respective statistical values of the strain signals.
This paper discussed on an application of the statistical based analysis approach on fatigue failure of carbon steel. A new statistical based method known as Integrated Kurtosis-based Algorithm for Z-filter (I-kaz) and the quadratic mean were used in this fatigue failure assessment. Fatigue tests were performed according to the ASTM E466-96 standard with the attachment of a strain gauge to the tested specimen. Test was performed at a constant loading leading to the collection of strain data throughout the test. A fatigue based data acquisition system was used in this work. All obtained data were analysed using specific software. Fatigue failure behaviour was observed through the strain signal analysis to investigate significant correlation between I-kaz coefficient, root mean square value and the fatigue failure behaviour. It was found that I-kaz coefficient and root mean square value are proportional to life cycle.
1 January 2014 in Journal of Central South University
Constant amplitude data obtained from smooth specimens have been used for many years to evaluate the fatigue life of components. However, most of the loadings used in real applications are variable or random. This paper discussed the analysis on fatigue signal of Al 6061 specimen under three types of loading sequences, i.e. constant loading (CL), Hi-lo (HL) and Lo-hi (LH) associating with Integrated Kurtosis-based Algorithm for Z-filter (I-Kaz) technique. Fatigue test was performed according to the ASTM E466-96 standard with attachment of 2mm strain gauge at the gauge of flat dumbbell shape specimen. Fatigue test was carried out at all the three types of loading stress at the sampling frequency of 8Hz. Series of strain data were collected throughout the test from initial until failure occur using a data acquisition system. The respective I-kaz coefficients and the three dimensional plot s were used to analyse and interpret the strain signals. Fatigue damage for thress loading sequences were compared, and it was found that the I-kaz coefficient was linearly correlate to fatigue damage, hence, it is worth to see the capability of this method to representing the fatigue damage of metallic materials