Lignin is the second most abundant biopolymer in the world. Due to its complex structure, lignin can be considered a valuable source of energy and different chemicals. In addition, using different reactive sites on lignin, it is possible to prepare different value-added products, such as resins, polyurethanes, and many more. Different functional groups are presented on the lignin macromolecule and can be modified via different pathways. Hydroxyl groups are the most promising reactive sites for lignin modifications. Both modified and unmodified lignins could be used for preparing different biomaterials. This paper shows several possible applications of lignin. The main goal of this publication is to show the possible valorization of lignin in different value-added products throughout the actual market prices of non-biobased materials. This review proves that lignin has unquestionable advantages in material technology and can replace different substances which will lead to a higher potential market value of lignins and could create new bio-based materials compared with the actual prices of commercially available materials. Nowadays, it is easier to use lignin as an energy source even though a lot of lignin modifications and conversion processes are still under development and need more time to become more relevant for industrial applications. Information in the presented paper should reveal to the reader the importance and economic benefits of using lignin as a value-added compound in different applications.
Extracts from spruce bark obtained using different deep eutectic solvents were screened for their total phenolic content (TPC) and antioxidant activities. Water containing choline chloride-based deep eutectic solvents (DESs) with lactic acid and 1,3-propanediol, 1,3-butanediol, 1,4-butanediol, and 1,5-pentanediol, with different molar ratios, were used as extractants. Basic characteristics of the DESs (density, viscosity, conductivity, and refractive index) were determined. All the DESs used behave as Newtonian liquids. The extractions were performed for 2 h at 60 °C under continuous stirring. TPC was determined spectrophotometrically, using the Folin-Ciocalteu reagent, and expressed as gallic acid equivalent (GAE). The antioxidant activity was determined spectrophotometrically by 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging assay. The TPC varied from 233.6 to 596.2 mg GAE/100 g dry bark; radical scavenging activity (RSA) ranged between 81.4% and 95%. This study demonstrated that deep eutectic solvents are suitable solvents for extracting phenolic compounds from spruce bark.
This study aimed to resolve the issue of the lack of detailed understanding of the effect of initial lignin content in hardwood kraft pulps on pulp delignification by deep eutectic solvents. The authors used Kappa number of the concerned pulp, intrinsic viscosity, and selectivity and efficiency of delignification as the parameters of the effect. The pulp (50 g oven dry pulp) was treated with four different DESs systems based on choline chloride with lactic acid (1:9), oxalic acid (1:1), malic acid (1:1), and system alanine:lactic acid (1:9); the results were compared to those reached by oxygen delignification. The results showed that the pulp with a higher initial lignin content had a greater fraction of easily removed lignin fragments.