A one-dimensional mathematical model of particulate solids thermal treatment in a fluidized bed based on the theory of Markov chains is proposed. A feature of the model takes into account the variation of particle properties that takes place during the fluidization. This variation occurs due to thermo-physical and chemical processes that take place during particulate solids treatment in the fluidized bed. These variations affect the particle settling velocity which is the main parameter that forms the bed expansion and local velocity of flow around the particles that strongly influences the thermo-physical and chemical processes in the bed. A generalized correlation for the drag force coefficient is proposed and tested for various materials. It was necessary to have more precise calculation of the particle settling velocity in the model. The model was developed to describe the drying process in the bed. A good correlation between computed and experimental data was achieved.
2 January 2014 in Particulate Science and Technology
A one-dimensional mathematical model of particulate solids fluidization based on the theory of Markov chains is proposed. Transition probabilities that form the matrix and control the migration of particles over the bed are subdivided into two types, convection and diffusion. The convection transition probabilities depend on the local particle concentration in cells of the chain and mainly define the bed expansion at certain hydrodynamic conditions. The diffusion transition probabilities form particle concentration distribution over the bed height. On the basis of the model, the heat exchange between gas and particulate solids is described. The batch fluidization model is generalized to the case of continuous fluidization that allows predicting a connection between throughput and hold-up, as well as particle residence time distribution in a bed. Some aspects of the approach are verified experimentally.
The objective of the study is to examine the Coats-Redfern approximation and to propose an innovative kinetic calculation method for the complex process of the heavy tar thermal decomposition under non-isothermal process. The thermal decomposition process was examined using the thermogravimetric analysis. There are several kinetic models proposed to analyze pyrolysis mechanism in terms of the formal reaction. In this manner, the kinetic parameters of the pyrolysis process can be evaluated based on total mass loss (thermogravimetric analysis -TGA). The TGA procedures can be conducted with isothermal or non-isothermal conditions, but the experimental data obtained according to this procedure have to be transformed into appropriate correlation. The obtained results have shown that the reaction takes place within temperature range of 540 K to 700 K and the inductive period of the process is about 224 min. Kinetic parameters were estimated with using of the conventional Coats-Redfern method. A new kinetic calculation method has been designed to provide a less laboriousness of identifications procedures compared with Coats-Redfern approximation and to take into account an induction time of the process. As the outcome of this study, it was shown that the kinetic parameters estimated with using of the proposed model-fitted method gives the more appropriate correlation in comparison with the conventional Coats-Redfern method. The proposed method uses the Coats-Redfern algorithm for evaluation of the reaction mechanism, but the value of the constant rate is defined directly from experimental data on the conversion rate.
24 January 2019 in Particulate Science and Technology
The objective of the study is to develop a simple yet informative model to investigate the features of the process of particulate flows formation in a circulating gas-solid fluidized bed. The proposed model is based on the theory of Markov chains. The riser is presented as a chain of perfectly mixed cells. The conversion of particles of a source material into particles of an end product occurs in these cells due to this or that chemical or thermo-physical process. The transportation of material over the chain is controlled by a matrix of transition probabilities. The return flow that comes from a separator is routed to the downer, which is described as a plug flow apparatus that has a time delay between the inflow and outflow issuing from it. The outflow is routed back into the riser. The numerical experiments were carried out for the batch fluidization. It is found that the batch circulating fluidization only has advantages over the dense bed under a small time delay in the downer and a relatively high gas flow velocity in the riser. The results of laboratory tests performed at the circulating fluidized bed demonstrated a good qualitative correlation with the theoretical data.
30 December 2019 in JP Journal of Heat and Mass Transfer
Background: The research works on circulating fluidized bed are mostly devoted to investigation of the process in separate parts of a circulating fluidized bed reactor, and practically never to investigation of the entire circulating loop. The interference between the processes in the riser, separator and downer remains practically unexamined. Objective: The objective of the study is to develop a simple yet informative model to investigate the features of a particulate flows forming in a circulating gas-solid fluidized bed reactor. Method: The method of mathematical modeling is used. The proposed model is based on the theory of Markov chains. The transformation of a raw particulate material into an end product in the riser is taken into account. The return flow in a downer is described with a time delay between the inflow and outflow from it. Results: The proposed model allowed performing numerical experiments on the influence of the process parameters on its main technological characteristics both for the transient and steady state. Conclusion: It is found that the batch circulating fluidization has advantages in comparison to the dense bed only at a small time delay in the downer and a relatively high gas flow velocity in the riser. It is also found that the maximum feed flow rate exists in a continuous circulating fluidization that ensures the stable operation of the circuit. This threshold crossing leads to the overfilling of the riser and its blockage. Optimal positioning of the return flow input allows increasing this maximum feed flow rate.