Ashutosh Dhekne

Dr. Ashutosh Dhekne


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 June 2021
Verified
Conference Paper
Open access
YCYifeng Cao
Yifeng Cao
ADAshutosh Dhekne
Ashutosh Dhekne
MAMostafa Ammar
Mostafa Ammar
High-precision tracking of a pen-like instrument's movements is desirable in a wide range of fields spanning education, robotics, and art, to name a few. The key challenge in doing so stems from the impracticality of embedding electronics in the tip of such instruments (a pen, marker, scalpel, etc.) as well as the difficulties in instrumenting the surface that it works on. In this paper, we present ITrackU, a movement digitization system that does not require modifications to the surface or the tracked instrument's tip. ITrackU fuses locations obtained using ultra-wideband radios (UWB), with an inertial and magnetic unit (IMU) and a pressure sensor, yielding multidimensional improvements in accuracy, range, cost, and robustness, over existing works. ITrackU embeds a micro-transmitter at the base of a pen which creates a trackable beacon, that is localized from the corners of a writing surface. Fused with inertial motion sensor and a pressure sensor, ITrackU enables accurate tracking. Our prototype of ITrackU covers a large 2.5m × 2m area, while obtaining around 2.9mm median error. We demonstrate the accuracy of our system by drawing numerous shapes and characters on a whiteboard, and compare them against a touchscreen and a camera-based ground-truthing system. Finally, the produced stream of digitized data is minuscule in volume, when compared with a video of the whiteboard, which saves both network bandwidth and storage space.

28 September 2023 in Proceedings of the ACM on Human-Computer Interaction
Verified
Journal Article
Open access
JLJiachen Li
Jiachen Li
BZBingrui Zong
Bingrui Zong
TCTingyu Cheng
Tingyu Cheng
YLYunzhi Li
Yunzhi Li
EMElizabeth D. Mynatt
Elizabeth D. Mynatt
ADAshutosh Dhekne
Ashutosh Dhekne
While aging adults frequently prefer to "age in place", their children can worry about their well-being, especially when they live at a distance. Many in-home systems are designed to monitor the real-time status of seniors at home and provide information to their adult children. However, we observed that the needs and concerns of both sides in the information sharing process are often not aligned. In this research, we examined the design of a system that mitigates the privacy needs of aging adults in light of the information desires of adult children. We apply an iterative process to design and evaluate a visualization of indoor location data and compare its benefits to displaying raw video from cameras. We elaborate on the tradeoffs surrounding privacy and awareness made by older adults and their children, and synthesize design criteria for designing a visualization system to manage these tensions and tradeoffs.

10 May 2021 in Computer
Verified
Journal Article
Closed access
JAJoy Arulraj
Joy Arulraj
ACAbhijit Chatterjee
Abhijit Chatterjee
ADAlexandros Daglis
Alexandros Daglis
ADAshutosh Dhekne
Ashutosh Dhekne
URUmakishore Ramachandran
Umakishore Ramachandran
We present a holistic vision for the edge-cloud ecosystem, with the intent of spurring the creation of next-generation technologies for futuristic applications that operate at computational-perception speeds to convert sensed data to actionable knowledge.

3 June 2024
Verified
Conference Paper
Open access
YCYifeng Cao
Yifeng Cao
ADAshutosh Dhekne
Ashutosh Dhekne
MAMostafa Ammar
Mostafa Ammar
Recording 3D movements of a user's hand, robotic arms, or an object, even in a small confined space, has several applications in AR/VR, robotics, movement science, and 3D modeling and rendering. Existing camera-based tracking systems, though extremely accurate, are quite expensive and suffer from issues of occlusion and face difficulties when operating in extremely dark or extremely bright environments. We contend that trading-off a bit of accuracy while reducing costs and enabling more flexible operating environment might be worth exploring. This paper presents UTrack3D, a table-top setup that tracks the movements of an object in 3D space using embedded low-cost ultra-wideband (UWB) radios. The core idea is to continuously track the changes in phase as captured from UWB signal's channel impulse response (CIR) derived from the UWB messages received at a set of dual-antenna UWB receivers. Each of our custom dual-antenna receivers captures the UWB signal from two corners of a cuboid allowing us to perform relative phase measurements. The main challenges in the solution are caused by a location-dependant large variation in the signal amplitudes and corruption of the CIR due to multipath. UTrack3D tackles these challenges via a signal processing pipeline fusing a forward localization process which tracks the object's location using UWB CIR phase, and a posterior location check process, which validates the estimated location. UTrack3D is implemented on commercial-off-the-shelf (COTS) UWB chips, and provides a 90th percentile accuracy of 9 mm in a table-top 3D region (1.5m × 0.8m × 0.8m). We evaluate the effects of additional UWB receivers, effect of different movement speeds, and effect of small-scale signal blocking using different materials. We expect UTrack3D to allow researchers a rich new environment for further advancing UWB-based 3D tracking.

30 January 2024 in Sensors
Verified
Journal Article
Open access
PDF file
BIBashima Islam
Bashima Islam
NMNancy L McElwain
Nancy L McElwain
JLJialu Li
Jialu Li
MDMaria I. Davila
Maria I. Davila
YHYannan Hu
Yannan Hu
MHMark Hasegawa-Johnson
Mark Hasegawa-Johnson
Across five studies, we present the preliminary technical validation of an infant-wearable platform, LittleBeats™, that integrates electrocardiogram (ECG), inertial measurement unit (IMU), and audio sensors. Each sensor modality is validated against data from gold-standard equipment using established algorithms and laboratory tasks. Interbeat interval (IBI) data obtained from the LittleBeats™ ECG sensor indicate acceptable mean absolute percent error rates for both adults (Study 1, N = 16) and infants (Study 2, N = 5) across low- and high-challenge sessions and expected patterns of change in respiratory sinus arrythmia (RSA). For automated activity recognition (upright vs. walk vs. glide vs. squat) using accelerometer data from the LittleBeats™ IMU (Study 3, N = 12 adults), performance was good to excellent, with smartphone (industry standard) data outperforming LittleBeats™ by less than 4 percentage points. Speech emotion recognition (Study 4, N = 8 adults) applied to LittleBeats™ versus smartphone audio data indicated a comparable performance, with no significant difference in error rates. On an automatic speech recognition task (Study 5, N = 12 adults), the best performing algorithm yielded relatively low word error rates, although LittleBeats™ (4.16%) versus smartphone (2.73%) error rates were somewhat higher. Together, these validation studies indicate that LittleBeats™ sensors yield a data quality that is largely comparable to those obtained from gold-standard devices and established protocols used in prior research.

27 March 2023 in Proceedings of the ACM on Interactive, Mobile, Wearable and Ubiquitous Technologies
Verified
Journal Article
Open access
YCYifeng Cao
Yifeng Cao
ADAshutosh Dhekne
Ashutosh Dhekne
MAMostafa Ammar
Mostafa Ammar
Visual body signals are designated body poses that deliver an application-specific message. Such signals are widely used for fast message communication in sports (signaling by umpires and referees), transportation (naval officers and aircraft marshallers), and construction (signaling by riggers and crane operators), to list a few examples. Automatic interpretation of such signals can help maintaining safer operations in these industries, help in record-keeping for auditing or accident investigation purposes, and function as a score-keeper in sports. When automation of these signals is desired, it is traditionally performed from a viewer's perspective by running computer vision algorithms on camera feeds. However, computer vision based approaches suffer from performance deterioration in scenarios such as lighting variations, occlusions, etc., might face resolution limitations, and can be challenging to install. Our work, ViSig, breaks with tradition by instead deploying on-body sensors for signal interpretation. Our key innovation is the fusion of ultra-wideband (UWB) sensors for capturing on-body distance measurements, inertial sensors (IMU) for capturing orientation of a few body segments, and photodiodes for finger signal recognition, enabling a robust interpretation of signals. By deploying only a small number of sensors, we show that body signals can be interpreted unambiguously in many different settings, including in games of Cricket, Baseball, and Football, and in operational safety use-cases such as crane operations and flag semaphores for maritime navigation, with > 90% accuracy. Overall, we have seen substantial promise in this approach and expect a large body of future follow-on work to start using UWB and IMU fused modalities for the more general human pose estimation problems.