Simulating the impact of debris flows on structures and exploring the feasibility of applying energy dissipation devices or shock isolators to reduce the damage caused by debris flows can make great contribution to the design of disaster prevention structures. In this paper, we propose a new type of device, a lateral damping buffer, to reduce the vulnerability of building structures to debris flows. This lateral damping buffer has two mechanisms of damage mitigation: when debris flows impact on a building, it acts as a buffer, and when the structure vibrates due to the impact, it acts as a shock absorber, which can reduce the maximum acceleration response and subsequent vibration respectively. To study the effectiveness of such a lateral damping buffer, an impact test is conducted, which mainly involves a lateral damping buffer attached to a two-degree-of-freedom structure under a simulated debris flow load. To enable the numerical study, the equation of motion of the structure along with the lateral damping buffer is derived. A subsequent parametric study is performed to optimize the lateral damping buffer. Finally, a practical design procedure is also provided.
In order to study the base pounding effects of base-isolated structure under earthquake excitations, a base pounding theoretical model with a linear spring-gap element is proposed. A finite element analysis program is used in numerical simulation of seismic response of based-isolated structure when considering base pounding. The effects of the structure pounding against adjacent structures are studied, and the seismic response of a base-isolated structure with lead-rubber bearing and a base-isolated structure with friction pendulum isolation bearing are analyzed. The results indicate that: the model offers much flexibility to analyze base pounding effects. There is a most clearance unfavorable width between adjacent structures. The structural response increases with pounding. Significant amplification of the story shear-force, velocity, and acceleration were observed. Increasing the number of stories in a building leads to an initial increase in impact force, followed by a decrease in such force. As a result, it is necessary to consider base pounding in the seismic design of base-isolated structures.